Search

In the field of catalysis on solid surfaces, discrimination of the site-specific chemistry taking place on surfaces consisting of multiple types of sites is challenging, especially at electrified solid/liquid interfaces. In this study, site-specific chemical labeling on Pt stepped surfaces was achieved by attaching the 13CO species exclusively on the top side of the (110) steps, while making all of the (111) sites available. The catalysts were then employed in a spectro-electrochemical study of the electro-oxidation of methanol and ethanol. The onset potentials for the formation of 13CO2 and 12CO2 revealed the existence of two channels of carbon dioxide formation, separated by about 0.22 V, on the same Pt surface. The active sites with lower overpotential requirement (or lower energy input) for activation of the reaction pathway of CO2 formation resided on the (111) terraces. On the other hand, the active sites with higher overpotential requirement (or higher energy input) for activation of the reaction pathway for electro-oxidation of 13COads species to 13CO2 were at the top of the (110) steps. The findings revealed the identities of the most active sites and least active sites involved in the formation of CO2 during the electro-oxidation of alcohols. On Pt surfaces, the complex interplay involving the steps on the surface favors activation of the pathways for COads oxidation on the (111) terraces, rather than promoting reaction steps directly on the steps themselves. M.J.S.F. is grateful to PNPD/CAPES (Brazil). A.A.T acknowledges CAPES (PROCAD-2013) and CNPq (309066/2013-1). J.M.F. thanks the MINECO (Spain) project CTQ2016-762213-P.

This work investigates the mechanisms by which Sn and Ru can improve or inhibit the site-specific catalytic activity of Pt (neighboring or distant from foreign atoms) at bimetallic surfaces. For this purpose, we decorated Pt stepped surfaces (nonequivalent sites) by site-selective electrodeposition of different coverages of either Sn or Ru on (110) Pt steps, forming Snsteps/Pt(hkl) and Rusteps/Pt(hkl) bimetallic surfaces, and we used CO adlayer electro-oxidation as a surface probe reaction, monitored by in situ FTIR and cyclic voltammetry techniques. The results showed that both Sn and Ru selectively accelerated the reaction pathway of CO electro-oxidation only at the (111) Pt terrace sites but importantly played different underlying roles in favoring activity at these active sites. In the case of Snsteps/Pt(hkl) catalysts, the CO adlayer oxidation started at potentials lower than those on Rusteps/Pt(hkl), but Sn only improved the activity at sites on atoms of the first rows of (111) Pt terraces, while the catalytic benefit of Ru seemed to extend further along the (111) Pt terraces. In comparison to unmodified Pt surfaces, Ru did not influence the activity at the line of the (110) Pt steps, while Sn slightly inhibited the activity there, which characterized a slight contrasting effect in catalytic activity at the (111) terraces in comparison to the (110) step sites. In this regard, the chemical modification by irreversible deposition of either Sn or Ru at lines of Pt steps on a stepped Pt surface interestingly resulted in a nonuniform synergistic effect or balancing of energies involving different site-specific catalytic activities at nonequivalent Pt surface sites. Since the electro-oxidation of CO takes place at the (111) Pt terrace sites away from Sn or Ru, and because COads behaves as an immobile species during its oxidation, it is reasonable to assume that the classical bifunctional mechanism completely fails as a model to interpret the enhancement of catalytic activity toward CO electro-oxidation at Snsteps/Pt(hkl) or Rusteps/Pt(hkl) catalysts. The selective alteration in site-specific catalytic activity of Pt was related to (i) the type and coverage of foreign atoms (Sn or Ru) at the lines of Pt steps, (ii) the crystallographic orientation of Pt sites, whether (111) terraces or steps, and (iii) the width of the (111) Pt terraces. M.J.S.F. acknowledges financial support from PNPD/CAPES (Brazil). A.A.T. acknowledges support from CAPES (PROCAD 2013) and CNPq (grant #309066/2013-1). J.M.F. thanks MINECO (Project CTQ2016-76221-P) and GV (Project PROMETEOII/2014/013) for financial support. W.C. is grateful for the award of an F.P.I. grant associated with project CTQ2009-13142.

The knowledge about how CO occupies and detaches from specific surface sites on well-structured Pt surfaces provides outstanding information on both dynamics/mobility of COads and oxidation of this molecule under electrochemical conditions. This work reports how the potentiostatic growth of different coverage CO adlayers evolves with time on both cubic and octahedral Pt nanoparticles in acidic medium. Data suggest that during the growth of the CO adlayer, COads molecules slightly shift toward low coordination sites only on octahedral Pt nanoparticles, so that these undercoordinated sites are the first filled on octahedral Pt nanoparticles. Conversely, on cubic Pt nanoparticles, adsorbed CO behaves as an immobile species, and low coordinated sites as well as (100) terraces are apparently filled uniformly and simultaneously. However, once the adlayer is complete, irrespectively of whether the CO is oxidized in a single step or in a sequence of different potential steps, results suggest that COads behaves as an immobile species during its oxidation on both octahedral and cubic Pt nanoparticles. M. J. S. Farias is grateful to the CAPES/PNPD (Brazil) for the financial support. G. A. Camara acknowledges CNPq (grants no. 405695/2013-6 and 309176/2015-8) and FUNDECT (grants no. 23/200.583/2012). J. M. Feliu thanks the MINECO (Spain) project CTQ2016-76221-P. J.S.G. acknowledges financial support from VITC (Vicerrectorado de Investigación y Transferencia de Conocimiento) of the University of Alicante.

In order to deepen the knowledge about the origin of the CO preoxidation process and the intrinsic catalytic activity of Pt superficial steps toward CO oxidation, a series of CO stripping experiments were performed on stepped Pt electrodes in acidic medium. For the occurrence of CO preoxidation, it was found that it arises (reproducibly) whenever four interconnected conditions are simultaneously fulfilled: (1) CO adsorption at potentials lower than about 0.2 V; (2) on surfaces saturated with COads; (3) in the presence of traces of CO in solution; (4) in the presence of surface steps. If any of these four conditions is not satisfied, the CO preoxidation pathway does not appear, even though the steps on the electrode surface are completely covered by CO. By controlling the removal of the CO adlayer (voltammetrically), we show that once the CO adlayer has been partially oxidized, the (111) terrace sites of stepped surfaces are released earlier than the (110) step sites. Moreover, if (110) steps are selectively decorated with CO, its oxidation occurs only at potentials ∼150 mV higher than the CO preoxidation peak. Our results systematically demonstrate that step sites are less active to oxidize CO than those ones responsible for the CO preoxidation process. Once the sites responsible for the CO preoxidation are made free, there is no apparent motion of the remaining adsorbed CO layer, suggesting that the activation of the surface controls the whole process, rather than the diffusion of COads toward hypothetically “most active sites”. Voltammetric and chronoamperometric experiments performed on partially covered CO adlayers suggest that adsorbed CO behave as a motionless species during its oxidation, in which the CO adlayer is removed piece by piece. By means of in situ FTIR experiments, the stretching frequency of CO selectively adsorbed on (110) step sites was examined. Band frequency results confirm that those molecules adsorbed on steps are fully coupled with the adsorbed CO on (111) terraces when the surface reaches full coverage. M.J.S. Farias is grateful to the CNPq (Brazil) (grants 200390/2011-2 and 313402/2013-2) for the financial support. G. A. Camara acknowledges financial assistance from CNPq (grants 305494/2012-0 and 405695/2013-6) and FUNDECT (grant 23/200.583/2012). J. M. Feliu thanks the MINECO (Spain) project CTQ2013-44083-P.