Search

The practical application of Na-superionic conductor structured materials is hindered by limited energy density and structure damage upon activating the third Na

The development of intercalation anodes with high capacity is key to promote the progress of "rocking-chair" Zn-ion batteries (ZIBs). Here, layered BiOI is considered as a promising electrode in ZIBs due to its large interlayer distance (0.976 nm) and low Zn

Composite electrolytes composed of a nanoceramic and polymer have been widely studied because of their high ionic conductivity, good Li-ion transference number, and excellent machinability, whereas the intrinsic reason for the improvement of performance is ambiguous. Herein, we have designed a functional polymer skeleton with different types of nanofiller to reveal the superiority of fast ion conductors in composite electrolyte. Three types of ceramics with different dielectric constants and Li-ion transfer ability were selected to prepare composite electrolytes, the composition, structure, and electrochemical performances of which were systematically investigated. It was found that the addition of fast ion conductive ceramics could provide a high Li-ion transference ability and decreased diffusion barrier because the additional pathways existed in the ceramic, which are revealed by experiment and density functional theory calculations. Benefiting from the superiority of fast ion conductor, Li-metal batteries with this advanced composite electrolyte exhibit an impressive cycling stability and enable a dendrite-free Li surface after cycling. Our work enriches the understanding of the function of fast ion conductors in composite electrolyte and guides the design for other high-performance composite electrolytes in rechargeable solid batteries.

Li-rich manganese base oxides with a high specific capacity of nearly 300 mA h g–1 are acting as the most superior cathode material for high-energy density lithium-ion batteries. However, voltage d...

As high capacity cathodes, O3-type Na-based oxides always suffer from a series of monoclinic transitions upon sodiation/desodiation, mainly caused by Na+/vacancy ordering and Jahn–Teller (J−T) dist...

The fundamental understanding of electrocatalytic reaction process is anticipated to guide electrode upgradation and acquirement of high-performance vanadium redox flow batteries (VRFBs). Herein, a carbon fiber prototype system with a heteroatom gradient distribution has been developed with enlarged interlayer spacing and a high graphitization that improve the electronic conductivity and accelerate the electrocatalytic reaction, and the mechanism by which gradient-distributed heteroatoms enhance vanadium redox reactions was elucidated with the assistance of density functional theory calculations. All these contributions endow the obtained electrode prominent redox reversibility and durability with only 1.7% decay in energy efficiency over 1000 cycles at 150 mA cm

The rapid capacity decay caused by the poor contact and large polarization at the interface between the cathode and solid electrolytes is still a big challenge to overcome for high-power-density solid batteries. In this study, a superior Li+ conductive transition layer Li1.4Al0.4Ti1.6(PO4)3 is introduced to coat LiNi0.6Co0.2Mn0.2O2, as a model cathode, to mitigate polarization and enhance dynamic characteristics. The critical attribute for such superior dynamics is investigated by the atomic force microscopy with boundary potential analysis, revealing that the formed interfacial transition layer provides a gradual potential slope and sustain-released polarization, and endows the battery with improved cycling stability (90% after 100 cycles) and excellent rate capability (116 mA h g–1 at 2 C) at room temperature, which enlightens the comprehension of interface engineering in the future solid batteries systems.

The development of a three-dimensionally flexible, large-surface area, high-conductivity electrode is important to improve the low conductivity and utilization of active materials and restrict the shuttle of long-chain polysulfides in Li–polysulfide batteries. Herein, we constructed an integrated three-dimensional carbon nanotube forest/carbon cloth electrode with heteroatom doping and high electrical conductivity. The as-constructed electrode provides strong trapping on the polysulfide species and fast charge transfer. Therefore, the Li–polysulfide batteries with as-constructed electrodes achieved high specific capacities of ∼1200 and ∼800 mA h g–1 at 0.1 and 1 C, respectively. After 300 cycles at 0.5 C, a specific capacity of 623 mA h g–1 was retained.