Search

With the development of the power industry and the increase in the capacity of power systems, vacuum switches have been developed rapidly. The distribution characteristics of the vacuum arc can reflect the working conditions of the vacuum switch. So, it is vital to understand the distribution characteristics in the vacuum arc burning process for understanding the interruption performance of vacuum switches. Based on the 3D magnetohydrodynamic model, we investigated the high-current vacuum arc burning process by modeling and numerical simulation. The research findings show a certain correspondence between the change in plasma parameters values and the change in arc current. The distribution of plasma parameters is uniform when the current is small. The distribution of plasma parameters in the first 1/4 cycle is more uniform than in the second 1/4 cycle. The evolution characteristics of the arc plasma parameters for interruption before the arc current maximum differ significantly from those for interruption after the arc current maximum and current maximum. The results of this study can provide a reference for the design and improvement of vacuum switches. [ABSTRACT FROM AUTHOR]

With the advantages of environmental protection, small size, and light weight, the vacuum circuit breaker has been widely used in power systems. At present, it is developing toward the direction of high voltage and high current. In this paper, the magnetic field simulation model of a cup-shaped axial magnetic contact system is established, and the actual magnetic field data in the arc area are obtained as the boundary conditions, and then a three-dimensional steady-state magnetohydrodynamic model of the vacuum arc is established. The plasma parameter distribution characteristics in the vacuum arc area are studied by changing the number of slots in the contact plate, the angle of the contact cup chute, the length of the slot in the contact plate, and the central process hole. On this basis, a new type of embedded axial magnetic contact system including an embedded magnetic ring and a reverse contact cup is proposed, and the influence of changing the angle and number of inclined slots of the embedded contact cup on the arc distribution characteristics at the peak current and current zero is further studied. The simulation results show that the new structure contact is helpful to the breaking capacity of the vacuum switch and has a guiding significance for the design of the vacuum circuit breaker. By comparison, our simulation results have the same trend with the experimental results of other researchers. [ABSTRACT FROM AUTHOR]

Vacuum circuit breakers (VCBs) are widely used in power distribution systems. When the VCB in a switchgear interrupts the short circuit current, the U type loop, which consists of a vacuum interrupter, an external busbar and a conductive rod, generates an external transverse magnetic field (ETMF). This field deflects the vacuum arc and affects the interruption performance of the VCB. In this paper, the real magnetic field data of the arc region are obtained by establishing a simulation model of an electrode system, taking into account the real ETMF and real axial magnetic field (AMF). Furthermore, the three dimensional steady magnetohydrodynamic model of the vacuum arc is established by using real magnetic field data as the boundary condition. The vacuum arc characteristics under the combined effect of AMF and the asymmetric transverse magnetic field (TMF) are studied. The simulation results show that the ETMF considerably changes the Bx of the arc column, which demonstrates asymmetry in the positive and negative directions, whereas By demonstrates a weaker asymmetry. Moreover, the asymmetric TMF deflects the distributions of the vacuum arc plasma and increases the partial heat flux density and axial current density. With the increase in the severity of the short circuit, the TMF asymmetry of the arc region is enhanced and the deflection of the vacuum arc plasma is also enhanced. [ABSTRACT FROM AUTHOR]