Search

A novel magnetic properties tester is designed to accurately and conveniently change the air gap of the core, which can fix cores of various types. The dynamic magnetic characteristics of the amorphous core under sinusoidal excitation within 20 kHz is measured with different air gap lengths and magnetic flux density. It is found that in the case of the small air gap, the total loss decreases as the air gap increases. When the frequency is 20 kHz and the flux density is 0.1 T, the loss can even be reduced by 7%. This paper analyzes the experimental data and summarizes the influence of the air gap and magnetic flux density about the core loss. Besides, the influence of air gap on magnetic flux density distribution is illustrated and analyzed by the means of FEM (Finite Element Method). It is valuable for the design of high frequency transformer and inductor. [ABSTRACT FROM AUTHOR]

To reduce the volume, axial length and cost, a radial three-pole five-degree-of-freedom (5-DOF) integrated hybrid magnetic bearing (HMB) is studied, which the rotor can be levitated stably in one unit. Firstly, the configuration and suspension principle are introduced. The mathematical models of suspension forces are deduced by the magnetic circuit analysis. Then, according to radial and axial bearing capacity, the design method of main parameters is given. Finally, the magnetic circuit, suspension mechanism, air gap flux density, force-current relationships are calculated and analyzed by three-dimensional finite element method. The research results have shown that the structure of the 5-DOF integrated HMB is reasonable, and the suspension mechanism, mathematical model and design method are correct. [ABSTRACT FROM AUTHOR]

This paper presents the magnetic field characteristics of a synchronous generator with a salient pole structure using a simple magnetic equivalent circuit (MEC) method. This method aims to reduce the analysis time considering nonlinearity. By using the MEC, a solution for the magnetic flux density is obtained. The linkage flux is derived using the magnetic flux density of the air gap and the armature voltage is obtained. Additionally, results obtained using the finite-element method and MEC are validated against experimental data. [ABSTRACT FROM AUTHOR]