Search

The heat transfer and wake-induced vibrations of a cylinder of circular cross section in the wake of another identical cylinder are numerically studied in this work at a Reynolds number (Re) = 100. The reduced velocities (Ur) are varied in the range of 2–14. The downstream cylinder is allowed to oscillate in two degrees of freedom, i.e., in the transverse as well as in the streamwise direction. The mass ratio (m*) is taken as 10, while the structural damping is ignored to get the maximum amplitude of vibration. The spacing ratio (L/D) between the cylinders is varied from 1.5 to 6, covering the major regimes, i.e., single body, reattachment, and co-shedding. The coefficients of lift (CL) and drag (CD), vibrational amplitudes of the cylinder, the Nusselt number (Nu), the Strouhal number (St), and vortex shedding patterns are studied. The results are discussed with the help of lift-displacement phase plots, cylinder trajectory plots, and vorticity and temperature contours. The lock-in condition at Ur = 8 is observed for all values of L/D, whereas the lock-in zone is the widest for the co-shedding regime at L/D = 6. By increasing L/D from 1.5 to 2.5 at Ur = 8, the CL of the downstream cylinder increases by 43%, whereas the CL of the upstream cylinder decreases by 61%. The downstream cylinder experiences lower drag as compared to the upstream cylinder and stationary isolated cylinder. A maximum decrease in the average drag coefficient of 107%, as compared to the stationary isolated cylinder, was observed for the downstream cylinder at L/D = 1.5 and Ur = 2, leading to the negative drag. Mostly, the 2S and C(2S) vortex shedding pattern is observed, whereas a steady flow and chaotic pattern emerged in a few cases. The results reveal that with increasing L/D, the average Nu for both the upstream and downstream cylinders increases as the effect of each cylinder on the other diminishes. [ABSTRACT FROM AUTHOR]

Understanding the behavior of viscoelastic (VE) fluids in confined geometries is crucial for applications in biologic systems, heat transfer devices, enhanced oil recovery, and many others. Here, we perform a systematic steady-state simulation of a VE fluid at low Reynolds numbers through a channel with successive smooth contractions and expansions. We analyze the hydrodynamic performance of the fluid with particular attention to vortex patterns that develop downstream of the contractions. We show that elastic vortices form at higher contraction ratios and that there are critical Weissenberg numbers (Wic) unique to each contraction ratio where the flow shifts from non-vortical to vortical. This Wic increases with an increasing contraction length. The coexistence of elongational-, shear-, and rotational-flow is essential for vortex development and evolution. We also analyzed the effect of the Deborah number (De) on the vortex pattern in a multiple contraction system and observed that the vortex area significantly depends on the distance between the contractions. We show that there are three distinctly different regions in De, in which the flow characteristics change in successive contractions. For high De, the flow in the downstream contraction is significantly affected by the upstream contraction. Our results have implications for the use of VE fluids with various VE properties in different types of porous media. [ABSTRACT FROM AUTHOR]

A theoretical investigation on heat transfer of nanofluid transport in a ciliated channel is presented. A mathematical model for cilia oriented nanofluid transport through the human male reproductive tract is exhibited. Considering the structure of tubules, the Reynolds number is considered very small. The concept of a long wavelength approximation is incorporated to model the nanofluid flow problem. The exact analytical expressions for the x-component of velocity, temperature, nanoparticle concentration, stream function, volume flow rate, and pressure gradient are calculated. The solution for the transverse component of velocity, pressure rise per wavelength, and friction force on the wall of the channel is explored numerically, while variations in crucial flow parameters are examined graphically. [ABSTRACT FROM AUTHOR]

Two-degree-of-freedom vortex-induced vibration (VIV) of a finned cylinder with heat transfer is studied numerically at the Reynolds number Re = 150. The governing equations in the Arbitrary Lagrangian-Eulerian frame are solved by the finite volume method. The dynamics of the oscillating cylinder (with or without fins) in the fluid flow was approximated as a mass-spring system. The effects of the number and arrangement of the fins (14 different cases) on the vortex shedding pattern, vibration amplitude, and frequency and heat transfer of the cylinder are investigated and discussed. The results indicate that in comparison with the stationary state, the effects of the number and arrangement of the fins on the wake pattern and the heat transfer enhancement in the VIV state are significant. Different vortex shedding pattern like 2S, P, 2P, S + P and combination of them with stable or unstable interactions between vortices and cylinders are observed in an oscillating cylinder. In the vibration state of finned cylinders, the heat transfer enhances up to 50.4% with respect to the stationary state and increases up to 64% with respect to the stationary smooth cylinder. [ABSTRACT FROM AUTHOR]

In this work, the effect of the presence of a heat source and its location on natural convection in a C-shaped enclosure saturated by a nanofluid is investigated numerically using the lattice Boltzmann method. Fifteen cases consisting of different heat source locations attached to an isolated wall of the enclosure have been considered to achieve the best configuration at different Rayleigh numbers (103-106) and various solid volume fractions of the nanofluid (0-0.05). Results are shown in terms of the streamlines, isothermal lines, velocity profiles, and the local and average Nusselt numbers. The numerical solution is benchmarked against published results from previous studies for validation, and a good agreement is demonstrated. According to the results, at Ra = 103, the maximum Nusselt number is achieved when the heat source is located within the upper horizontal cavity. Moreover, at higher Rayleigh numbers (Ra = 106) and locations of the heat source within the vertical cavity yield the best Nusselt numbers. Compared to the base fluid and at low Rayleigh numbers, the increase in the Nusselt number of the nanofluid is not found to be dependent on the location of the heat source. However, for high Rayleigh numbers, the maximum increase is obtained when the heat source is located in the upper part of the vertical. [ABSTRACT FROM AUTHOR]

A transversely oscillating circular cylinder confined in a channel has the potential to promote mixing and heat transfer at moderate Reynolds number flows. In the present study, simulation results for flow past a circular cylinder subjected to forced cross-flow oscillations in a straight channel with an upstream splitter plate are presented in a wide range of cylinder oscillation frequencies, including the subharmonic, superharmonic, and primary lock-in regimes. Simulations are performed at Re=100, with cylinder oscillation amplitude of 0.4 diameters and a blockage ratio of 1/3. A spectral element algorithm based on the arbitrary Lagrangian Eulerian formulation is utilized. The numerical method exhibits spectral accuracy and allows large mesh deformation in the computational domain without mesh refinements. The main objective of this study is systematic investigations of the cylinder oscillation on the vortex shedding mechanism, downstream vortex patterns, and forces exerted on the cylinder. [ABSTRACT FROM AUTHOR]