Search

Digital Subtraction Angiography is commonly affected by artifacts due to the patient movements during the acquisition of the images without and with the contrast medium. This paper presents a preliminary study on an angiographic and angio-tomographic technique based on the quasi-simultaneous acquisition of two images, obtained using two different filters at the exit of an X-ray tube. One of the two filters (K-edge filter) contains the same chemical element used as a contrast agent (gadolinium in this study). This filter absorbs more radiation with energy just above the so called K-edge energy of gadolinium than the radiation with energy just below it. The other filter (an aluminium filter in this study) is simply used to suppress the low-energy contribution to the spectrum. Using proper calibration curves, the two images are combined to obtain an image of the contrast agent distribution. In the angio-tomographic application of the proposed technique two images, corresponding to the two filter types, are acquired for each viewing angle of the tomographic scan. From the two tomographic reconstructions, it is possible to obtain a three-dimensional map of the contrast agent distribution. The technique was tested on a sample consisting of a rat skull placed inside a container filled with water. Six small cylinders with 4.7 mm internal diameter containing the contrast medium at different concentrations were placed inside the skull. In the plain angiographic application of the technique, five out of six cylinders were visible, with gadolinium concentration down to 0.96%. In the angio-tomographic application, all six cylinders were visible, with gadolinium concentration down to 0.49%. This preliminary study shows that the proposed technique can provide images of the contrast medium at low concentration without most of the artifacts that are present in images produced by conventional techniques. The results encourage further investigation on the feasibility of a clinical implementation of the technique. [ABSTRACT FROM AUTHOR]

Conventional x-ray transmission tomography provides the spatial distribution of the absorption coefficient inside a sample. Other tomographic techniques, based on the detection of photons coming from fluorescent emission, Compton and Rayleigh scattering, are used for obtaining information on the internal elemental composition of the sample. However, the reconstruction problem for these techniques is generally much more difficult than that of transmission tomography, mainly due to self-absorption effects in the sample. In this article an approach to the reconstruction problem is presented, which integrates the information from the three types of signals. This method provides the quantitative spatial distribution of all elements that emit detectable fluorescent lines (Z≥15 in usual experimental conditions), even when the absorption effects are strong, and the spatial distribution of the global density of the lighter elements. The use of this technique is demonstrated on the reconstruction of a grain of the martian meteorite NWA817, mainly composed of low Z elements not measured in fluorescence and for which this method provides a unique insight. The measurement was done at the ID22 beamline of the European Synchrotron Radiation Facility. [ABSTRACT FROM AUTHOR]