Search

We present a study of the effects of strain on the magnetocrystalline anisotropy energy and magnetic moments of Y 2 Fe 14 B bulk alloy. The study has been performed within the framework of density functional theory in its fully relativistic form under the generalized gradient approximation. We have studied seven different in-plane a lattice constant values ranging from 8.48 up to 9.08 Å with an increment of δ a = 0.1 Å. For each a value, we carried out an out-of-plane c parameter optimization, achieving the corresponding optimized lattice pair (a , c). We find a large variation in the site resolved magnetic moments for inequivalent Fe, Y, and B atoms for different lattice expansions and a negative contribution to the total moment from the Y sites. We find a strong variation in the magnetocrystalline anisotropy with the c / a ratio. However, the calculated variation when coupled with thermodynamic spin fluctuations is unable to explain the experimentally observed increase in the total magnetic anisotropy, suggesting that a different physical mechanism is likely to be responsible in contrast with previous interpretations. We show that opposing single- and two-ion anisotropy terms in the Hamiltonian gives good agreement with the experiment and is the probable origin of the non-monotonic temperature dependence of the net anisotropy of Y 2 Fe 14 B bulk alloy. [ABSTRACT FROM AUTHOR]

Using an atomistic spin model, we have simulated spin wave injection and propagation into antiferromagnetic IrMn from an exchange coupled CoFe layer. The spectral characteristics of the exited spin waves have a complex beating behavior arising from the non-collinear nature of the antiferromagnetic order. We find that the frequency response of the system depends strongly on the strength and frequency of oscillating field excitations. We also find that the strength of excited spin waves strongly decays away from the interfacial layer with a frequency dependent attenuation. Our findings suggest that spin waves generated by coupled ferromagnets are too weak to reverse IrMn in their entirety even with resonant excitation of a coupled ferromagnet. However, efficient spin wave injection into the antiferromagnet is possible due to the non-collinear nature of the IrMn spin ordering. [ABSTRACT FROM AUTHOR]

Nd 2 Fe 14 B has generated significant interest since its discovery in the 1980s due to its impressive energy density, which makes it a prime candidate for use in permanent magnet applications. Its performance is known to suffer greatly at the high temperatures required for motor applications around 450 K. Core/shell nanocomposites provide a potential route to improve material performance by combining the highly anisotropic permanent magnet with a material with high moment and high Curie temperature. We have used an atomistic spin model to investigate the magnetic properties of Nd 2 Fe 14 B with α - F e in a core/shell nanostructure. We find that at typical motor operating temperatures, increasing α - F e content reduces the coercivity of the system while enhancing the saturation magnetization. The overall effect is that an improvement in B H max is seen with increasing α - F e up to an optimal value of 70 vol. %. This property of core/shell nanostructures would make them a suitable substitute for pure Nd 2 Fe 14 B while simultaneously lowering the raw material cost of the permanent magnet component of high-performance motors. [ABSTRACT FROM AUTHOR]

Skyrmions have attracted significant interest due to their topological spin structures and fascinating physical features. The skyrmion phase arises in materials with a Dzyaloshinskii–Moriya interaction at interfaces or in volume of non-centrosymmetric materials. Although skyrmions have been demonstrated experimentally, the general critical intrinsic relationship among fabrication, microstructures, magnetization, and the existence of skyrmions remains to be established. Here, two series of CoFeB ultrathin films with controlled atomic scale structures are employed to reveal this relationship. The amount of defects was artificially tuned by inverting the growth order, and skyrmions were shown to be preferentially formed in samples with more defects. By utilizing first-order reversal curves, the stable region and the skyrmion densities can be efficiently controlled in the return magnetization loops. These findings establish a general internal link from sample preparation to skyrmion generation and provide a general method for controlling skyrmion density. [ABSTRACT FROM AUTHOR]

A trilayer micromagnetic model based on the Landau-Lifshitz-Bloch equation of motion is utilized to study the properties of L10-FePt/TiN/L10-FePt pseudo spin valves (PSVs) in direct comparison with experiment. Theoretical studies give an insight on the crystallographic texture, magnetic properties, reversal behavior, interlayer coupling effects, and magneto-transport properties of the PSVs, in particular, with varying thickness of the top L10-FePt and TiN spacer. We show that morphological changes in the FePt layers, induced by varying the FePt layer thickness, lead to different hysteresis behaviors of the samples, caused by changes in the interlayer and intralayer exchange couplings. Such effects are important for the optimization of the PSVs due to the relationship between the magnetic properties, domain structures, and the magnetoresistance of the device. [ABSTRACT FROM AUTHOR]

The magnetic skyrmionium can be seen as a coalition of two magnetic skyrmions with opposite topological charges and has potential applications in next-generation spintronic devices. Here, we report the current-driven dynamics of a skyrmionium in a ferromagnetic nanotrack with the voltage-controlled magnetic anisotropy. The pinning and depinning of a skyrmionium controlled by the voltage gate are investigated. The current-driven skyrmionium can be used to mimic the skyrmionium diode effect in the nanotrack with a voltage gate. We have further studied the skyrmionium dynamics in the nanotrack driven by a magnetic anisotropy gradient in the absence of spin current. The performance of a single wedge-shaped voltage gate at different temperatures is studied. Our results may provide useful guidelines for the design of voltage-controlled and skyrmionium-based spintronic devices. [ABSTRACT FROM AUTHOR]

A complex transverse alternating-current (ac) susceptibility (χT) technique based on magneto-optical detection has been developed with sufficient sensitivity for thin film recording media. The technique has been used to measure the dispersions in grain size and anisotropy field in perpendicular magnetic recording media. Applying a direct-current (dc) field perpendicular to the easy axis effectively reduces the thermal energy barrier, which leads to thermally activated switching on the time scale of the ac field applied in the easy-axis (perpendicular) direction. The dc field dependence of the resulting imaginary transverse ac susceptibility Im(χT) is sensitive to dispersions in both the grain size and the anisotropy field. The sensitivity has been used to extract the amount of both dispersions. It has been found that the extracted grain size dispersion values agree well with those obtained from plane-view transmission electron microscopy micrographs. [ABSTRACT FROM AUTHOR]

We have investigated the magnetic damping of precessional spin dynamics in defect-controlled epitaxial grown Fe3O4(111)/Yttria-stabilized Zirconia nanoscale films by all-optical pump-probe measurements. The intrinsic damping constant of the defect-free Fe3O4 film is found to be strikingly larger than that of the as-grown Fe3O4 film with structural defects. We demonstrate that the population of the first-order perpendicular standing spin wave (PSSW) mode, which is exclusively observed in the defect-free film under sufficiently high external magnetic fields, leads to the enhancement of the magnetic damping of the uniform precession (Kittel) mode. We propose a physical picture in which the PSSW mode acts as an additional channel for the extra energy dissipation of the Kittel mode. The energy transfer from the Kittel mode to the PSSW mode increases as in-plane magnetization precession becomes more uniform, resulting in the unique intrinsic magnetic damping enhancement in the defect-free Fe3O4 film. [ABSTRACT FROM AUTHOR]

Using the time-resolved magneto-optical Kerr effect method, helicity-dependent all-optical magnetization switching (HD-AOS) is observed in ferrimagnetic TbFeCo films. Our results reveal the individual roles of the thermal and nonthermal effects after a single circularly polarized laser pulse. The evolution of this ultrafast switching occurs over different time scales, and a defined magnetization reversal time of 460 fs is shown—the fastest ever observed. Micromagnetic simulations based on a single macro-spin model, taking into account both heating and the inverse Faraday effect, are performed which reproduce HD-AOS demonstrating a linear path for magnetization reversal. [ABSTRACT FROM AUTHOR]

Magneto-optical measurements have been applied to determine the anisotropy field of perpendicular media with a well-defined demagnetizing state. The rotation of the perpendicular magnetization component is measured as a function of the in-plane field by the Polar Kerr effect. The field range is sufficiently small to avoid domain formation and ensure coherent magnetization rotation. By fitting to a simple response function, the effective anisotropy field (H'[SUBK1] = H[SUBK1] - 4πM[SUBS]) with a well-defined 4πM[SUBS] demagnetization correction can be determined. This also enables accurate determination of the ratio of short-time coercivity H[SUB0] over anisotropy field H[SUBk], an important parameter for perpendicular recording. The H[SUB0]/H[SUBk] ratio is found to decrease with increasing intergranular coupling strength, in good agreement with our micromagnetic results. It drops from about 0.8 for weakly coupled media to 0.5 for strongly coupled media. Theoretical studies show that the effects of easy axis angular dispersion are small, about 1% error for 5° dispersion, and the rotation method measures the mean value of H[SUBk] for media with anisotropy field distribution. [ABSTRACT FROM AUTHOR]

Exchange coupling between magnetic grains is essential for maintaining the stability of stored information in magnetic recording media. Using an atomistic spin model, we have investigated the coupling between neighbouring magnetic grains where magnetic impurity atoms have migrated into the non-magnetic grain boundary. We find that when the impurity density is low, a biquadratic term in addition to the bilinear term is found to better describe the inter-granular exchange coupling. The temperature dependence of both terms is found to follow a power law behaviour with the biquadratic exchange constant decaying faster than the bilinear. For the increasing grain boundary thickness, the inter-granular exchange reduces and also decays more quickly with temperature. Further simulations of a grain at a bit boundary show an unexpected energy minimum for in-plane magnetisation. This feature is reproduced if the biquadratic exchange term is included. [ABSTRACT FROM AUTHOR]

Synthetic ferrimagnets are composite magnetic structures formed from two or more anti-ferromagnetically coupled magnetic sublattices with different magnetic moments. Here, we report on atomistic spin simulations of the laser-induced magnetization dynamics on such synthetic ferrimagnets and demonstrate that the application of ultrashort laser pulses leads to sub-picosecond magnetization dynamics and all-optical switching in a similar manner as in ferrimagnetic alloys. Moreover, we present the essential material properties for successful laser-induced switching, demonstrating the feasibility of using a synthetic ferrimagnet as a high density magnetic storage element without the need of a write field. [ABSTRACT FROM AUTHOR]