Search

Here, we present a frequency tuning mechanism for microwave cavities designed for axion dark matter searches and show that it provides a range of at least 200 MHz for the fundamental mode TM010 resonant at ∼10 GHz. The apparatus is based on a clamshell cavity, with the two semi-cells held together at a fixed joint while the other side opens to tune the frequency of the resonant modes. Measurements of the cavity frequencies and quality factor were taken at liquid helium temperature as the aperture was increased incrementally to ∼2°. We show that the frequency shift is approximately linear with respect to the angle of aperture with no mode crossings present for an aperture less than 2°. Furthermore, the form factor and quality factor of the TM010 mode remain relatively constant throughout the tuning as predicted by simulation., (© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

In this paper, we will describe the characterization of an RF amplification chain based on a traveling wave parametric amplifier. The detection chain is meant to be used for dark matter axion searches, and thus, it is coupled to a high Q microwave resonant cavity. A system noise temperature T sys = (3.3 ± 0.1) K is measured at a frequency of 10.77 GHz, using a novel calibration scheme, allowing for measurement of T sys exactly at the cavity output port.

Searches for dark matter axions involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, until recently, to the use of non-superconducting metals by the presence of the external magnetic field. In this paper, we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic structure by the use of sapphire rods. The quality factor at cryogenic temperature is in excess of 5 × 10 5 for a selected mode.

We describe recent improvements in the development of the high power laser system used in the motion induced radiation (MIR) experiment to amplify electromagnetic fields inside a microwave cavity. The improvements made on the oscillator stabilization, the pulse train shaping device, and the spatial beam uniformity are reported., (© 2011 American Institute of Physics)