Search

Considering the special characteristics existing in the pulse-width modulated (PWM) switching converter, a general method for the time-stepping finite element analysis based electromagnetic field coupling with its feeding circuit used in the analysis of PWM switching converter considering hysteresis effects is introduced in this paper. Comparing with the electromagnetic field-circuit indirect coupling method (ICM), the proposed method has overcome the drawback that the ICM cannot take the hysteresis effects into account. Compared with the electromagnetic field-circuit direct coupling method (DCM), the proposed method has the similar accuracy but higher efficiency. Furthermore, like the ICM, the proposed method also divides the system with higher state dimensions produced by the DCM into two subsystems with lower state dimensions; this may reduce the algorithm convergence problem which often happens in high dimensional systems. [ABSTRACT FROM AUTHOR]

Winding inductance is an important parameter in determining the performance of electrical machines, particularly those with large inductance variation. This paper investigates the influence of winding inductance variation on the performance of a three-phase three-stack claw pole permanent magnet motor with soft magnetic composite (SMC) stator by using an improved phase variable model. The winding inductances of the machine are computed by using a modified incremental energy method, based on three-dimensional nonlinear time-stepping magnetic field finite element analyses. The inductance computation and performance simulation are verified by the experimental results of an SMC claw pole motor prototype. [ABSTRACT FROM AUTHOR]

Recent advances in magnetic materials have led to the development of compact and light weight, medium and high frequency transformers, which would be a possible solution to reducing the size and weight of wind turbine power generating systems. This paper presents the overall design and analysis of a Metglas amorphous alloy 2605SA1 based medium frequency transformer to generate the isolated balanced multiple DC supplies for medium voltage converter systems. A comprehensive electromagnetic analysis is conducted on the proposed design based on experimental results. The test stand, data analysis, and test results are discussed. [ABSTRACT FROM AUTHOR]

Magneto-rheological elastomer (MRE) is a new kind of smart material. Its rheological properties can be altered and controlled in a real time manner when it is applied an external magnetic field. For calculating magnetic properties of MRE material, usually Maxwell-Garnet equation is used to acquire an approximately effective permeability. This equation treats the magnetic property of particles as linear. However, when the applied magnetic field is alternating or rotating, the nonlinearity of magnetic property and magnetic hysteresis cannot be neglected. Hence, the measurement and modelling of the magnetic properties under alternating and rotating magnetic fields are essential to explore new applications of the material. This paper presents the investigation on the magnetic hysteresis properties of MRE material under one-dimensional (1-D) alternating and two-dimensional (2-D) rotating magnetic field excitations. A kind of MRE material, consisting of 70% carbonyl iron particles, 10% silicone oil, and 20% silicone rubber, was used to investigate the magnetic properties. The diameter of carbonyl iron particles is 3-5 μm. The measurement results, such as the relations between magnetic field intensity (H) and magnetic flux density (B) under different magnetic field excitations on the MRE sample, have been obtained and analyzed. These data would be useful for design and analysis of MRE smart structures like MR dampers. [ABSTRACT FROM AUTHOR]

This paper presents a finite element analysis (FEA) based method for analyzing and controlling the bias magnetic state of the transformer of a pulse-width-modulation (PWM) switching full bridge dc-dc converter. A field-circuit indirect coupling method for predicting the transient bias magnetic state is introduced first. To increase flexibility of the proposed method, a novel transformer model which can address not only its basic input-output characteristic, but also the nonlinear magnetizing inductance, is proposed. Both the asymmetric characteristic and the variable laws of the current flowing through the two secondary windings during the period of PWM switching-off state are highlighted. Finally, the peak magnetizing current controlled method based on the on-line magnetizing current computation is introduced. Analysis results show that this method can address the magnetic saturation at winding ends, and hence many previous difficulties, such as the start-up process and asymmetry of power electronics, can be easily controlled. [ABSTRACT FROM AUTHOR]

An electromagnetic design of a double-sided high temperature superconducting (HTS) linear synchronous motor (HTSLSM) with an HTS bulk magnet secondary is introduced in this paper. A HTS magnetic suspension system is applied to replace the sliding rail to levitate the secondary mover resulting in the HTSLSM moving without sliding friction. The thrust model of the HTSLSM is built using a magnetic circuit method and the thrust characteristics obtained from the model are compared with finite element analysis and practical testing results. The theoretical analysis on the prototype has also been verified by measurements. [ABSTRACT FROM AUTHOR]

Due to their intrinsic isotropic magnetic properties, soft magnetic composite (SMC) materials are applied in electrical machines in which the magnetic energy can be transported in three dimensions (3-D). However, in real applications, complicated magnetic properties such as anisotropy and nonlinearity, are found, in particular, at ahigh frequency range. This paper studies the 3-D magnetic properties of SMC materials under complicated magnetizations, such as circular, elliptical, and spherical excitations. The magnetic flux density vector B loci, magnetic field strength vector H loci, and core losses at magnetization frequencies ranging from 50-1000 Hz were measured and discussed using an improved 3-D testing system. Experimental results show that rotational core losses are greater than alternating losses at the same magnitude of flux density. In addition, rotational loss increases sharply around the saturation point, but is not observed in alternating loss. [ABSTRACT FROM AUTHOR]