Search

We investigate the polarization of disk electrodes immersed in an electrolyte solution and subjected to a small external AC voltage over a wide range of frequencies. A mathematical model is developed based on the Debye–Falkenhagen approximation to the coupled Poisson–Nernst–Planck equations. Analytical techniques are used for predicting the spatial distribution of the electric potential and the complex impedance of the system. Scales for impedance and frequency are identified, which lead to a self-similar behavior for a range of frequencies. Experiments are conducted with gold electrodes of sizes in the range 100–350 μm immersed in a high-conductivity KCl solution over five orders of magnitude in frequency. A collapse of data on impedance magnitude and phase angle onto universal curves is observed with scalings motivated by the mathematical model. A direct comparison with the approximate analytical formula for impedance is made without any fitting parameters, and a good agreement is found for the range of frequencies where the analytical model is valid. [ABSTRACT FROM AUTHOR]

Poly(3,4-ethylenedioxythiophene) (PEDOT) doped with poly(styrene sulfonate) (PSS) is the most commonly used conducting polymer in organic bioelectronics. However, electrochemical capacitances exceeding the current state-of-the-art are required for enhanced transduction and stimulation of biological signals. The long-term stability of conducting polymer films during device operation and storage in aqueous environments remains a challenge for routine applications. In this work, we electrochemically synthesize a PEDOT composite comprising the water dispersible two-dimensional conducting material Ti3C2 MXene. We find that incorporating MXene as a co-dopant along with PSS leads to PEDOT:PSS:MXene films with remarkably high volumetric capacitance (607.0 ± 85.3 F cm−3) and stability (capacity retention = 78.44% ± 1.75% over 500 cycles), outperforming single dopant-comprising PEDOT films, i.e., PEDOT:PSS and PEDOT:MXene electropolymerized under the same conditions on identical surfaces. The stability of microfabricated PEDOT:PSS:MXene electrodes is evaluated under different conditions, i.e., when the films are exposed to sonication (∼100% retention over 6 min), upon immersion in cell culture media for 14 days (∆|Z| = 2.13%), as well as after continuous electrical stimulation. Furthermore, we demonstrate the use of a PEDOT:PSS:MXene electrode as an electrochemical sensor for sensitive detection of dopamine (DA). The sensor exhibited an enhanced electrocatalytic activity toward DA in a linear range from 1 µM to 100 μM validated in mixtures containing common interferents such as ascorbic acid and uric acid. PEDOT:PSS:MXene composite is easily formed on conductive substrates with various geometries and can serve as a high performance conducting interface for chronic biochemical sensing or stimulation applications. [ABSTRACT FROM AUTHOR]

We report dielectrophoretic (DEP) assembly of biological cells and microparticles using platinum-black electrodeposited conductive textile fiber. The threedimensional conductive structures with high aspect ratios were found to facilitate high electric field regions, as revealed by scanning electron microscope characterization. The effective conducting area (Aeff) and its stability of thread electrodes were estimated using electrochemical methods. Potential of platinum black electrodeposited thread as 3-D electrodes for creating high gradient electrical field for dielectrophoretic assembly of microspheres and Saccharomyces cerevisiae (yeast cells) into 1D and two-dimensional structures over long ranges under the application of low voltages (4-10 Vpp) has been demonstrated. The formation of highly ordered pearl chains of microparticles using thread electrodes when subjected to dielectrophoresis (DEP) has been discussed in detail. [ABSTRACT FROM AUTHOR]