Search

We report on the polarizing electrochromic (EC) effect of a conjugated polymer. This has been achieved in a planar flexible electrochemical device cell comprised of a patterned stretch-aligned thin film of polyaniline and an electrolyte, all made on a polyethylene foil substrate. The resulting device exhibits polarized absorption characteristics, of a dichroic ratio of 4, that can be controlled by the voltage applied. Also, thin flexible EC polarizers have been realized by combining two stretch-aligned polyaniline films with orthogonal stretching direction. In the resulting EC polarizer the orientation of the polarized absorption can be switched between two orthogonal directions, depending on the voltage applied. © 2003 American Institute of Physics. [ABSTRACT FROM AUTHOR]

An all-organic printed electrochemical rectifier is reported. The device is based on a patterned layer of poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) (PEDOT:PSS) that interfaces a patterned electrolyte top layer. Overlap between the electrolyte layer and the conducting polymer pattern results in the formation of two electrochemically active areas within the conducting polymer pattern. When bias voltage is applied across the conducting polymer pattern, the PEDOT in the negatively biased areas is reduced electrochemically, while the PEDOT in the positively biased area is further oxidized. Reducing PEDOT from its p-doped, pristine state to the neutral state results in a marked loss of electrical conductivity. Due to the unsymmetrical device geometry, the current through the device may be shut off for one polarity of applied bias voltage with an electrical current rectification ratio of 100 compared to the opposite polarity. The output characteristics of a corresponding half wave rectifier as well as those from a full wave bridge rectifier show stable performance at frequencies below 15 Hz. [ABSTRACT FROM AUTHOR]