Search

While the influence of various fabrication parameters during deposition on the ferroelectricity of hafnium oxide has been extensively studied, the effect of different atmospheres on the actual switching process has not yet been investigated. In this work, we characterized the ferroelectric properties of undoped hafnium oxide prepared by reactive sputtering under three different atmospheres: dry oxygen/nitrogen, wet nitrogen, and vacuum conditions. We found a significant correlation between dry and wet atmospheres and resulting polarization. Specifically, we observed a direct effect on ferroelectric switching when the film was exposed to dry atmospheres and vacuum, resulting in a higher electric field necessary to initialize the wake-up effect due to an initial imprint effect. Increasing the amount of wet nitrogen during switching decreased the imprint and lowered the necessary voltage required for the wake up. We present a simple model that explains and discusses the incorporation of moisture and its resulting consequences on the ferroelectric properties of hafnium oxide. Additionally, kinetic Monte Carlo simulations showed that the addition of protons to the oxide thin film leads to a lowering of the potential and to a redistribution of protons and oxygen vacancies, which reduces the initial imprint. [ABSTRACT FROM AUTHOR]

Spatially resolved luminescence and Raman spectroscopy investigations are applied to a series of (1122)-GaN samples grown by hydride vapor phase epitaxy (HVPE) grown over an initial layer deposited by metal organic vapor phase epitaxy on patterned sapphire substrates. Whereas these two differently grown GaN layers are crystallographically homogeneous, they differ largely in their doping level due to high unintentional oxygen uptake in the HVPE layer. This high doping shows up in luminescence spectra, which can be explained by a free-electron recombination band for which an analytical model considering the Burstein-Moss shift, conduction band tailing, and the bandgap renormalization is included. Secondary ion mass spectrometry, Raman spectroscopy, and Hall measurements concordantly determine the electron density to be above 1019cm-3. In addition, the strain state is assessed by Raman spectroscopy and compared to a finite element analysis. [ABSTRACT FROM AUTHOR]

We investigated the impact of strain relaxation on the current transport of Pr0.48Ca0.52MnO3 (PCMO) thin films grown epitaxially on SrTiO3 single crystals by pulsed laser deposition. The incorporation of misfit dislocations and the formation of cracks are identified as competing mechanisms for the relaxation of the biaxial tensile strain. Crack formation leads to a higher crystal quality within the domains but the cracks disable the macroscopic charge transport through the PCMO layer. Progressive strain relaxation by the incorporation of misfit dislocations, on the other hand, results in a significant decrease of the activation energy for polaron hopping with increasing film thickness. [ABSTRACT FROM AUTHOR]