Search

Previous experiments have shown (1) evidence that exposure to high-intensity sounds (e.g., air-gun signals) may cause damage to the sensory hair cells of the fish ears and impair fish hearing and (2) evidence that in some circumstances such exposures cause minimal structural damage. The contradictory results regarding the damage accrued suggested that the angle of sound energy arrivals at the fish ears may play a part in the propensity of the sound to cause damage to sensory hair cells. To further study this and gain insight into specific details of the differential motion of the otolith relative to the sensory macula when incident sounds arrive from different directions, three-dimensional finite element models were constructed based on the micro-computed tomography imaging of the sagittal otoliths of the bight redfish (Centroberyx gerrardi). We used the models to study the response of fish sagittal otoliths to sounds arriving from horizontal and vertical directions. Sound pressure levels, relative displacement, acceleration, and shear stress of the otoliths and/or otolith-water boundary were calculated and compared. The results suggest that the angle of sound energy arrivals at the otoliths and the geometry of the otolith lead to different magnitudes of the differential motion between the macula and otoliths, with sound arriving in the vertical potentially creating more damage than the same sound arriving from the horizontal. [ABSTRACT FROM AUTHOR]

Echolocation signals emitted by odontocetes can be roughly classified into three broad categories: broadband echolocation signals, narrowband high-frequency echolocation signals, and frequency modulated clicks. Previous measurements of broadband echolocation signal propagation in the bottlenose dolphin (Tursiops truncatus) did not find any evidence of focusing as the signals travel from the near-field to far-field. Finite element analysis (FEA) of high-resolution computed tomography scan data was used to examine signal propagation of broadband echolocation signals of dolphins and narrowband echolocation signals of porpoises. The FEA results were used to simulate the propagation of clicks from phonic lips, traveling through the forehead, and finally transmission into the water. Biosonar beam formation in the near-field and far-field, including the amplitude contours for the two species, was determined. The finite element model result for the simulated amplitude contour in the horizontal plane was consistent with prior direct measurement results for Tursiops, validating the model. Furthermore, the simulated far-field transmission beam patterns in both the vertical and horizontal planes were also qualitatively consistent with results measured from live animals. This study indicates that there is no evidence of convergence for either Tursiops or Phocoena as the sound propagates from the near-field to the far-field. [ABSTRACT FROM AUTHOR]

Research into the physical mechanism of odontocetes biosonar has made great progress in the past several decades, especially on wave propagation and biosonar beam formation in the foreheads of odontocetes. Although a number of experimental studies have been performed, the physical mechanism of odontocetes underwater target discrimination has not yet been fully understood. Previous research has experimentally studied the finless porpoise's target discrimination using cylinders different in material [Nakahara, Takemura, Koido, and Hiruda (1997). Mar. Mamm. Sci. 13(4), 639–649]. The authors proposed a computed tomography based finite element biosonar model to simulate the detailed process of a finless porpoise click emission and target detection in order to gain a further understanding of the underlying physical mechanism. The numerical solutions of resonance features of both steel and acrylic cylinders in this study are very consistent with the analytic solutions. Furthermore, the simulated outgoing clicks and echoes match the experiment results measured by Nakahara et al. The beam patterns of the scattered field were extracted and the resonance features of cylinders in different materials were analyzed. This method in this study could be used to study some other odontocetes that are inaccessible for experimental work and could also provide physical information for intelligent biomimetic underwater signal processors design. [ABSTRACT FROM AUTHOR]

Atlantic bottlenose dolphins (Tursiops truncatus) can effectively discriminate between water-filled cylinders with different wall thicknesses. The dolphins' performance may be particularly good when the cylinders are thinner. The dolphins' performance is also asymmetric, in that the discrimination accuracy is not equal when the target thickness increases and decreases by the same amount. Inspired by this, a finite element model is proposed here to mimic a dolphin actively transmitting sound to discriminate between targets using acoustic echoes. The waveforms and frequency spectra of acoustic echoes from a standard cylinder and comparison cylinders with wall thickness differences of ±0.3 mm were compared. The employed model simulations show good agreement with previous experimental measurements by Au and Pawloski [(1992). J. Compar. Physiol. A 170(1), 41–47]. Asymmetric arrival time shifts were found for the echo peaks and troughs with the same sequence numbers when the wall thicknesses were increased and decreased by the same amount. This asymmetry became more significant for echo peaks and troughs with higher sequence numbers. Apart from these asymmetric arrival time shifts of the acoustic echoes, the patterns of echo waveforms, the spatial distributions of sound pressures in the water, and the particle vibratory displacements in the cylinders were also found to vary with cylinder thickness. The physical origin of this asymmetric discrimination by the dolphins was explored using both geometric acoustics and wave acoustics. The asymmetry observed might be caused by the circumferential surface (Lamb) wave in the cylinder wall, which is a wave acoustics phenomenon that cannot be derived from geometric acoustics. The findings in this paper might be valuable not just for understanding the mechanism of the effect described, but also for helping the development of biomimetic intelligence for robust signal processing in underwater target discrimination. [ABSTRACT FROM AUTHOR]

Bottlenose dolphins project broadband echolocation signals for detecting and locating prey and predators, and for spatial orientation. There are many unknowns concerning the specifics of biosonar signal production and propagation in the head of dolphins and this manuscript represents an effort to address this topic. A two-dimensional finite element model was constructed using high resolution CT scan data. The model simulated the acoustic processes in the vertical plane of the biosonar signal emitted from the phonic lips and propagated into the water through the animal's head. The acoustic field on the animal's forehead and the farfield transmission beam pattern of the echolocating dolphin were determined. The simulation results and prior acoustic measurements were qualitatively extremely consistent. The role of the main structures on the sound propagation pathway such as the air sacs, melon, and connective tissue was investigated. Furthermore, an investigation of the driving force at the phonic lips for dolphins that emit broadband echolocation signals and porpoises that emit narrowband echolocation signals suggested that the driving force is different for the two types of biosonar. Finally, the results provide a visual understanding of the sound transmission in dolphin's biosonar. [ABSTRACT FROM AUTHOR]

A finite element method was used to investigate the temperature influence on sound beams of the Indo-Pacific humpback dolphin. The numerical models of a dolphin, which originated from previous computed tomography (CT) scanning and physical measurement results, were used to investigate sound beam patterns of the dolphin in temperatures from 21 °C to 39 °C, in increments of 2 °C. The -3 dB beam widths across the temperatures ranged from 9.3° to 12.6°, and main beam angle ranged from 4.7° to 7.2° for these temperatures. The subsequent simulation suggested that the dolphin's sound beam patterns, side lobes in particular, were influenced by temperature.

Harbor porpoises (Phocoena phocoena) use narrow band echolocation signals for detecting and locating prey and for spatial orientation. In this study, acoustic impedance values of tissues in the porpoise's head were calculated from computer tomography (CT) scan and the corresponding Hounsfield Units. A two-dimensional finite element model of the acoustic impedance was constructed based on CT scan data to simulate the acoustic propagation through the animal's head. The far field transmission beam pattern in the vertical plane and the waveforms of the receiving points around the forehead were compared with prior measurement results, the simulation results were qualitatively consistent with the measurement results. The role of the main structures in the head such as the air sacs, melon and skull in the acoustic propagation was investigated. The results showed that air sacs and skull are the major components to form the vertical beam. Additionally, both beam patterns and sound pressure of the sound waves through four positions deep inside the melon were demonstrated to show the role of the melon in the biosonar sound propagation processes in the vertical plane.

Computed tomography (CT) imaging and ultrasound experimental measurements were combined to reconstruct the acoustic properties (density, velocity, and impedance) of the head from a deceased Indo-Pacific humpback dolphin (Sousa chinensis). The authors extracted 42 soft forehead tissue samples to estimate the sound velocity and density properties at room temperature, 25.0  °C. Hounsfield Units (HUs) of the samples were read from CT scans. Linear relationships between the tissues' HUs and velocity, and HUs and density were revealed through regression analyses. The distributions of the head acoustic properties at axial, coronal, and sagittal cross sections were reconstructed, suggesting that the forehead soft tissues were characterized by low-velocity in the melon, high-velocity in the muscle and connective tissues. Further, the sound velocities of melon, muscle, and connective tissue pieces were measured under different temperatures to investigate tissues' velocity response to temperature. The results demonstrated nonlinear relationships between tissues' sound velocity and temperature. This study represents a first attempt to provide general information on acoustic properties of this species. The results could provide meaningful information for understanding the species' bioacoustic characteristics and for further investigation on sound beam formation of the dolphin.

The relative role of the various structures in the head of the baiji (Lipotes vexillifer) is examined. A finite element approach was applied to numerically simulate the acoustic propagation through a dolphin's head to examine the relative role of the skull, air sacs, and melon in the formation of the biosonar beam in the vertical plane. The beam pattern obtained with the whole head in place is compared with the beam pattern when the air sac is removed and the other structures (skull and melon) are in place, with only the skull removed, and finally with only the melon removed. The beam pattern with the air sacs and skull intact and the melon removed closely resembled the beam pattern for the complete head, suggesting that the melon has a minor role in the formation of the beam. The beam pattern for the other two cases had very little resemblance to the beam pattern for the whole head. The air sacs seem to have a role of directing propagation of the signal toward the front and the skull prevents the sound propagating below the rostrum. The beam patterns along with a correlation analysis showed that the melon had only a slight influence on the shape and direction of the beam. The resultant beam exiting the head of the dolphin is the result of complex reflection processes within the head of the animal.

The baiji (Lipotes vexillifer) of the Yangtze River possesses a sophisticated biosonar system. In this study, a finite element approach was used to numerically investigate the propagation of acoustic waves through the head of the Yangtze River dolphin, which possesses an inhomogeneous and complex structure. The acoustic intensity distribution predicted from models with and without the melon and/or skull showed that the emitted sound beam was narrow and formed a highly directed acoustic beam, and the skull and melon significantly enhanced the directional characteristics of the emitted sound. Finally, for a short duration impulsive source, the emitted sound pressure distributions were also simulated at different propagation times. The results provide useful information for better understanding the operation of the biosonar system in this rare and perhaps extinct animal.