Search

It is a major and complex task to accelerate an ion which has the same charge to mass ratio with strong contaminant ions, such as 12 C 4+ in the 18 O 6+ beam. An innovative method has been developed to suppress the contaminant ions in the Electron Cyclotron Resonance (ECR) ion source by introducing Li vapor. The ion distribution inside the ECR zone was obtained by the optical analysis of ions inside the ECR ion source. The 12 C 4+ ions were suppressed as much as by a factor of 10, whereas the 18 O 6+ beam changed little with the use of this technique.

The light intensity of (6)Li III line spectrum at λ = 516.7 nm was observed during (6)Li(3+) beam tuning at the Hyper-Electron Cyclotron Resonance (ECR) ion source. Separation of ion species of the same charge to mass ratio with an electromagnetic mass analyzer is known to be an exceptionally complex process. However, (6)Li III line intensity observation conducted in this study gives new insights into its simplification of this process. The light intensity of (6)Li III line spectrum from the ECR plasma was found to have a strong correlation with the extracted (6)Li(3+) beam intensity from the RIKEN Azimuthal Varying Field cyclotron.

Two methods for the feed of vapor from solid materials in the Center for Nuclear Study ECR ion source are described. A rod placed near the wall of the plasma chamber, operating up to a melting point of 2600 °C, has been used for CaO, SiO2, and FeO. An oven with a number of openings, operating up to 800 °C, has been used for P2O5, Li, and S. Typical ion beam intensities of (7)Li(2+), (6)Li(3+), (40)Ca(12+), and (56)Fe(15+) are achieved 280, 75, 28, and 7 eμA, respectively. High intensity heavy ion beams are stably supplied into the azimuthally varying field cyclotron.