Search

Bacterial pathogens that cannot be identified using matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) are occasionally encountered in clinical laboratories. The 16S rRNA gene is often used for sequence-based analysis to identify these bacterial species. Nevertheless, traditional Sanger sequencing is laborious, time-consuming, and low throughput. Here, we compared two commercially available 16S rRNA gene sequencing tests that are based on Illumina and Nanopore sequencing technologies, respectively, in their ability to identify the species of 172 clinical isolates that failed to be identified by MALDI-TOF MS. Sequencing data were analyzed by the respective built-in programs (MiSeq Reporter software of Illumina and Epi2me of Nanopore) and BLAST+ (v2.11.0). Their agreement with Sanger sequencing on species-level identification was determined. Discrepancies were resolved by whole-genome sequencing. The diagnostic accuracy of each workflow was determined using the composite sequencing result as the reference standard. Despite the high base-calling accuracy of Illumina sequencing, we demonstrated that the Nanopore workflow had a higher taxonomic resolution at the species level. Using built-in analysis algorithms, the concordance of Sanger 16S with the Illumina and Nanopore workflows was 33.14% and 87.79%, respectively. The agreement was 65.70% and 83.14%, respectively, when BLAST+ was used for analysis. Compared with the reference standard, the diagnostic accuracy of Nanopore 16S was 96.36%, which was identical to that of Sanger 16S and better than that of Illumina 16S (69.07%). The turnaround time of the Illumina workflow and the Nanopore workflow was 78 h and 8.25 h, respectively. The per-sample cost of the Illumina and Nanopore workflows was US$28.5 and US$17.7, respectively.

Accurate detection of influenza A virus (IAV) is crucial for patient management, infection control, and epidemiological surveillance. The World Health Organization and the Centers for Disease Control and Prevention have recommended using the M gene as the diagnostic gene target for reverse-transcription-PCR (RT-PCR). However, M gene RT-PCR has reduced sensitivity for recent IAV due to novel gene mutations. Here, we sought to identify novel diagnostic targets for the molecular detection of IAV using long-read third-generation sequencing. Direct nanopore sequencing from 18 nasopharyngeal specimens and one saliva specimen showed that the 5' and 3' ends of the PB2 gene and the entire NS gene were highly abundant. Primers selected for PB2 and NS genes were well matched with seasonal or avian IAV gene sequences. Our novel PB2 and NS gene real-time RT-PCR assays showed limits of detection similar to or lower than that of M gene RT-PCR and achieved 100% sensitivity and specificity in the detection of A(H1N1), A(H3N2), and A(H7N9) in nasopharyngeal and saliva specimens. For 10 patients with IAV detected by M gene RT-PCR conversion in sequentially collected specimens, NS and/or PB2 gene RT-PCR was positive in 2 (20%) of the initial specimens that were missed by M gene RT-PCR. In conclusion, we have shown that PB2 or NS gene RT-PCRs are suitable alternatives to the recommended M gene RT-PCR for diagnosis of IAV. Long-read nanopore sequencing facilitates the identification of novel diagnostic targets., (Copyright © 2020 American Society for Microbiology.)

An in-house-developed pncA sequencing assay for analysis of pyrazinamide (PZA) resistance was evaluated using 162 archived Mycobacterium tuberculosis complex (MTBC) isolates with phenotypic PZA susceptibility profiles that were well defined by analysis of Bactec MGIT 960 PZA kit and PZase activity data. Preliminary results showed 100% concordance between pncA sequencing and phenotypic PZA drug susceptibility test (DST) results among archived isolates. Also, 637 respiratory specimens were prospectively collected, and 158 were reported as MTBC positive by the Abbott Realti m e MTB assay (96.3% sensitivity [95% confidence interval {CI}: 92.2% to 98.7%]; 100% specificity [95% CI: 99.2% to 100.0%]). Genotypic and phenotypic PZA resistance profiles of these 158 MTBC-positive specimens were analyzed by pncA sequencing and Bactec MGIT 960 PZA kit, respectively. For analysis of PZA resistance, pncA sequencing detected pncA mutations in 5/5 (100%) phenotypic PZA-resistant respiratory specimens within 4 working days. No pncA mutations were detected among PZA-susceptible specimens. Combining archived isolates with prospective specimens, 27 were identified as phenotypic PZA resistant with pncA mutation. Among these 27 samples, 6/27 (22.2%) phenotypic PZA-resistant strains carried novel pncA mutations without rpsA and panD mutations. These included 5 with mutations (a deletion [Del] at 383T [Del383T], Del 380 to 390, insertion of A [A Ins] at position 127, A Ins at position 407, and G Ins at position 508) in pncA structural genes and 1 with a mutation (T-12C) at the pncA promoter region. All six of these strains had no or reduced PZase activities, indicating that the novel mutations might confer PZA resistance. Additionally, 25/27 phenotypic PZA-resistant strains were confirmed multidrug-resistant tuberculosis (MDR-TB) strains. As PZA is commonly used in MDR-TB treatment regimens, direct pncA sequencing will rapidly detect PZA resistance and facilitate judicious use of PZA in treating PZA-susceptible MDR-TB., (Copyright © 2019 American Society for Microbiology.)

Although the major causes of isoniazid (INH) resistance in Mycobacterium tuberculosis are confined to structural mutations in katG and promoter mutations in the mabA-inhA operon, a significant proportion of INH-resistant strains have unknown resistance mechanisms. Recently, we identified a high-level INH-resistant M. tuberculosis clinical isolate, GB005, with no known resistance-associated mutations. A comprehensive study was performed to investigate the molecular basis of drug resistance in this strain. Although no mutations were found throughout the katG and furA-katG intergenic region, the katG expression and the catalase activity were greatly diminished compared to those in H37Rv (P < 0.01). Northern blotting revealed that the katG transcript from the isolate was smaller than that of H37Rv. Sequencing analysis of furA and upstream genes discovered a 7.2-kb truncation extended from the 96th base preceding the initiation codon of katG. Complementation of the M. tuberculosis Δ(furA-katG) strain with katG and different portions of the truncated region identified a 134-bp upstream fragment of furA that was essential for full catalase activity and INH susceptibility in M. tuberculosis. The promoter activity of this fragment was also shown to be stronger than that of the furA-katG intergenic region (P < 0.01). Collectively, these findings demonstrate that deletion of the 134-bp furA upstream fragment is responsible for the reduction in katG expression, resulting in INH resistance in GB005. To our knowledge, this is the first report showing that deletion of the upstream region preceding the furA-katG operon causes high-level INH resistance in a clinical isolate of M. tuberculosis., (Copyright © 2014, American Society for Microbiology. All Rights Reserved.)

Rapid detection of methicillin-resistant Staphylococcus aureus (MRSA) nasal colonization is crucial for the prevention and control of MRSA infections in health care settings. The LightCycler MRSA Advanced Test (Roche Diagnostics) is a commercially available real-time PCR assay for direct detection of MRSA nasal colonization by targeting of the staphylococcal cassette chromosome mec (SCCmec)-orfX junction. The diagnostic performance of the assay was compared with that of ChromID MRSA agar (bioMérieux) culture and an in-house duplex real-time PCR assay. Among 1,246 nasal swab specimens collected from 2 general hospitals in Hong Kong, 174 (14%) were considered true positive for MRSA. Chromogenic culture and the in-house real-time PCR assay identified 147 (84.5%) and 133 (76.4%) true-positive cases with specificities of 100% and 98.6%, respectively. Based on the target melting temperature (Tm) values (57.0 to 62.0 °C) defined by the manufacturer, the LightCycler MRSA Advanced Test identified only 85 (48.9%) true-positive specimens. Interestingly, an additional 60 (34.5%) true-positive specimens were detected despite atypical Tm values of 55 °C, providing overall sensitivity and specificity values of 83.3% and 99%, respectively. Among isolates with Tm values of 55 °C, most were typed as clonal complex 45 (CC45). By sequence analysis of the SCCmec-orfX junction, characteristic single-nucleotide polymorphisms (SNPs) were identified only in isolates with Tm values of 55°C and not in those with typical Tm values. It is conceivable that those SNPs were located inside the target region of the proprietary hybridization probes, which resulted in a Tm shift in the melting curve analysis. Our study highlights the importance of a global evaluation of commercial kits so that the interpretation algorithm covers different lineages of MRSA clones prevalent in various geographical regions.

Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) for the identification of bacteria and fungi was recently introduced in microbiology laboratories. This technology could greatly improve the clinical management of patients and guidance for chemotherapy. In this study, we used a commercial MALDI Sepsityper extraction method to evaluate the performance of two commercial MALDI-TOF MS systems, the Vitek MS IVD (bioMérieux) and the Microflex LT Biotyper (Bruker Daltonics) for direct bacterial identification in positive blood cultures. In 181 monomicrobial cultures, both systems generated genus to species level identifications for >90% of the specimens (Biotyper, 177/181 [97.8%]; Vitek MS IVD, 167/181 [92.3%]). Overall, the Biotyper system generated significantly more accurate identifications than the Vitek MS IVD system (P = 0.016; 177 versus 167 out of 181 specimens). The Biotyper system identified the minority species among polymicrobial blood cultures. We also compared the performance of an in-house extraction method with that of the Sepsityper on both MALDI-TOF MS systems. The in-house method generated more correct identifications at the genus level than the Sepsityper (96.7% versus 93.5%) on the Biotyper system, whereas the two methods exhibited the same performance level (88.0% versus 88.0%) on the Vitek MS IVD system. Our study confirmed the practical advantages of MALDI-TOF MS, and our in-house extraction method reduced the reagent cost to $1 per specimen, with a shorter turnaround time of 3 h, which is highly cost-effective for a diagnostic microbiology service.

We studied the clinical and epidemiological characteristics of Klebsiella oxytoca-associated diarrhea in hospitalized patients in Hong Kong. Between 1 November 2009 and 30 April 2011, all inositol-fermenting colonies found on Simmons citrate agar supplemented with inositol, tryptophan, and bile salts (SCITB agar) used for the culturing of diarrheal stool samples were screened by a spot indole test for K. oxytoca. The overall sensitivity of SCITB agar plus the spot indole test (93.3%) for the detection of K. oxytoca in stool samples was superior to that of MacConkey agar (63.3%), while the specificities were 100% and 60.4%, respectively. The former achieved a 23-fold reduction in the workload and cost of subsequent standard biochemical identifications. Cytotoxin production and the clonality of K. oxytoca were determined by a cell culture cytotoxicity neutralization assay using HEp-2 cells and pulsed-field gel electrophoresis (PFGE), respectively. Of 5,581 stool samples from 3,537 patients, K. oxytoca was cultured from 117/5,581 (2.1%) stool samples from 104/3,537 (2.9%) patients. Seventy-six of 104 (73.1%) patients with K. oxytoca had no copathogens in their diarrheal stool samples. Twenty-four (31.6%) of 76 patients carried cytotoxin-producing strains, which were significantly associated with antibiotic therapy after hospital admission (50% versus 21.2%; P = 0.01). Health care-associated diarrhea was found in 44 (42%) of 104 patients with K. oxytoca, but there was no epidemiological linkage suggestive of a nosocomial outbreak, and PFGE showed a diverse pattern. None of the patients with cytotoxin-producing K. oxytoca developed antibiotic-associated hemorrhagic colitis, suggesting that K. oxytoca can cause a mild disease manifesting as uncomplicated antibiotic-associated diarrhea with winter seasonality.

We have developed a high-resolution melting (HRM) assay to scan for mutations in the rpoB, inhA, ahpC, and katG genes and/or promoter regions for the detection of rifampin and isoniazid resistance in Mycobacterium tuberculosis. For assay development, 23 drug-resistant isolates of M. tuberculosis having 29 different mutations, together with 40 drug-susceptible isolates, were utilized. All 29 mutations were accurately detected by our assay. We further validated the assay with a series of 59 samples tested in a blind manner. All sequence alterations that were within the regions targeted by the HRM assay were correctly identified. Compared against results of DNA sequencing, the sensitivity and specificity of our HRM assay were 100%. For the blinded samples, the specificities and sensitivities were 89.3% and 100%, respectively, for detecting rifampin resistance and 98.1% and 83.3%, respectively, for detecting isoniazid resistance, as isolates with mutations in regions not encompassed by our assay were not detected. A C-to-T sequence alteration at position -15 of the ahpC regulatory region, which was previously reported to be associated with isoniazid resistance, may possibly be a polymorphism, as it was detected in an isoniazid-susceptible M. tuberculosis isolate. HRM is a rapid, accurate, simple, closed-tube, and low-cost method. It is thus an ideal assay to be used in countries with a high prevalence of drug-resistant M. tuberculosis and where cost-effectiveness is essential. As a mutation-scanning assay for detecting drug-resistant M. tuberculosis, it can potentially lead to better treatment outcomes resulting from earlier treatment with the appropriate antibiotics.