Search

Dust explosions are among the most hazardous accidents affecting industrial facilities processing particulate solids. Describing the severity parameters of dust clouds is critical to the safety management and risk assessment of dust explosions. These parameters are determined experimentally in a 20 L spherical vessel, following the ASTM E1226 or UNE 14034 standards. Since their reproducibility depends on the levels of turbulence associated with the dust cloud, a computational model of the multi-phase (gas-solid) flow is used to simulate the dispersion process with the open-source CFD code OpenFOAM. The model is successfully validated against experimental measurements from the literature and numerical results of a commercial CFD code. In addition, this study considers the impact of particle size on the turbulence of the carrier phase, suggesting that particles attenuate its turbulence intensity. Moreover, the model predicts well the formation of a two-vortex flow pattern, which has a negative impact on the distribution of the particle-laden flows with dp≤ 100 μm, as most of the particles concentrate at the near-wall region. Contrarily, an improved homogeneity of dust cloud is observed for a case fed with larger particles (dp= 200 μm), as the increased inertia of these particles allows them to enter into the re-circulation regions.

We investigate the influence of microstructural traps on hydrogen diffusion and embrittlement in the presence of cyclic loads. A mechanistic, multi-trap model for hydrogen transport is developed, implemented into a finite element framework, and used to capture the variation of crack tip lattice and trapped hydrogen concentrations as a function of the loading frequency, the trap binding energies and the trap densities. We show that the maximum value attained by the lattice hydrogen concentration during the cyclic analysis exhibits a notable sensitivity to the ratio between the loading frequency and the effective diffusion coefficient. This is observed for both hydrogen pre-charged samples (closed-systems) and samples exposed to a permanent source of hydrogen (open-systems). Experiments are used to determine the critical concentration for embrittlement, by mapping the range of frequencies where the output is the same as testing in inert environments. We then quantitatively investigate and discuss the implications of developing materials with higher trap densities in mitigating embrittlement in the presence of cyclic loads. It is shown that, unlike the static case, increasing the density of “beneficial traps” is a viable strategy in designing alloys resistant to hydrogen assisted fatigue for both closed- and open-systems.