Search

The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS). A pair of MQXFA units is assembled in a stainless steel helium vessel, including the end domes, to make the Q1 Cold Mass or the Q3 Cold Mass. The US HL LHC Accelerator Upgrade Project* is responsible for the design, manufacturing and test of the Q1/Q3 Cold Masses and the complete MQXFA magnets. CERN provides the cryostat components and is responsible for integration and installation in HL LHC. The MQXFA quadrupoles have 150 mm aperture, 4.2 m magnetic length, nominal gradient of 132.2 T/m, and coil peak field of 11.3 T. They use Nb_3Sn conductor and a support structure made of segmented aluminum shells pre-loaded by using bladders and keys. This report presents the final design of the MQXFA quadrupole magnets. *Supported by the U.S. Department of Energy, Office of Science, Office of High Energy Physics, Comment: 120 pages

The common coil geometry provides an alternate design to the conventional cosine theta dipoles. It allows a wider range of conductor and magnet technologies. It also facilitates a low-cost, rapid-turn-around design and R&D program. Recent studies carried out as a part of the US Magnet Development Program revealed that at high fields (20 T with 15% operating margin or more), the common coil design also uses significantly less conductor (particularly much less HTS), as compared to that in the other designs., Contribution to Snowmass 2021. Accelerator Technology (AF7)