Search

A multi-stimuli cooling cycle can be used to increase the cyclic caloric performance of multicaloric materials like Ni-Mn-In Heusler alloys. However, the use of a uniaxial compressive stress as an additional external stimulus to a magnetic field requires good mechanical stability. Improvement of mechanical stability and strength by doping has been shown in several studies. However, doping is always accompanied by grain refinement and a change in transition temperature. This raises the question of the extent to which mechanical strength is related to grain refinement, transition temperature, or precipitates. This study shows a direct comparison between a single-phase Ni-Mn-Sn and a two-phase Gd-doped Ni-Mn-In alloy with the same transition temperature and grain size. It is shown that the excellent magnetocaloric properties of the Ni-Mn-In matrix are maintained with doping. The isothermal entropy change and adiabatic temperature change are reduced by only 15% in the two-phase Ni-Mn-In-Heusler alloy compared to the single-phase alloy, which is resulting from a slight increase in thermal hysteresis and the width of the transition. Due to the same grain size and transition temperature, this effect can be directly related to the precipitates. The introduction of Gd precipitates leads to a 100% improvement in mechanical strength, which is significantly lower than the improvement observed for Ni-Mn-In alloys with grain refinement and Gd precipitates. This reveals that a significant contribution to the improved mechanical stability in Gd-doped Heusler alloys is related to grain refinement., Comment: Keywords: metal matrix composites, magnetocaloric, magneto-structural phase transitions, microstructure, mechanical properties, Heusler alloy

Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable refrigeration. However, during cyclic operation these alloys suffer from structural and functional fatigue as a result of their high intrinsic brittleness. Here, we present based on Fe-doping of Ni-Mn-In a microstructure design strategy which simultaneously improves cyclic stability and maintains the excellent magnetocaloric and elastocaloric properties. Our results reveal that precipitation of a strongly Fe-enriched and In-depleted coherent secondary gamma-phase at grain boundaries can ensure excellent mechanical stability by hindering intergranular fracture during cyclic loading. In this way, a large elastocaloric effect of -4.5 K was achieved for more than 16000 cycles without structural or functional degradation, which corresponds to an increase of the cyclic stability by more than three orders of magnitude as compared to single-phase Ni-Mn-In-(Fe). In addition, we demonstrate that the large magnetocaloric effect of single-phase Ni-Mn-In-(Fe) can be preserved in the dual-phase material when the secondary gamma-phase is exclusively formed at grain boundaries as the martensitic transformation within the Heusler matrix is barely affected. This way, an adiabatic temperature change of -3 K and an isothermal entropy change of 15 $Jkg^{-1}K^{-1}$ was obtained in 2 T for dual-phase Ni-Mn-In-Fe. We expect that this concept can be applied to other single caloric and mutlicaloric materials, therewith paving the way for solid-state caloric cooling applications.

Novel Ni-Co-Mn-Ti all- d -metal Heusler alloys are exciting due to large multicaloric effects combined with enhanced mechanical properties. An optimized heat treatment for a series of these compounds leads to very sharp phase transitions in bulk alloys with isothermal entropy changes of up to 38 J kg−1 K−1 for a magnetic field change of 2 T. The differences of as-cast and annealed samples are analyzed by investigating microstructure and phase transitions in detail by optical microscopy. We identify different grain structures as well as stoichiometric (in)homogenieties as reasons for differently sharp martensitic transitions after ideal and non-ideal annealing. We develop alloy design rules for tuning the magnetostructural phase transition and evaluate specifically the sensitivity of the transition temperature towards the externally applied magnetic fields (dTt/μ0dH) by analyzing the different stoichiometries. We then set up a phase diagram including martensitic transition temperatures and austenite Curie temperatures depending on the e/a ratio for varying Co and Ti content. The evolution of the Curie temperature with changing stoi- chiometry is compared to other Heusler systems. Density Functional Theory calculations reveal a correlation of TC with the stoichiometry as well as with the order state of the austenite. This combined approach of experiment and theory allows for an efficient development of new systems towards promising magnetocaloric properties. Direct adiabatic temperature change measurements show here the largest value of -4 K in a magnetic field change of 1.93 T for Ni35Co15Mn37Ti13.