Search

Clays and claystones are considered in some countries (including Belgium, France and Switzerland) as a potential host rock for high activity long lived radioactive waste disposal at great depth. One of the aspects to deal with when assessing the performance of the disposal is related to the effects of the temperature elevation due to the placement of exothermic wastes on the host rock. The potential effects of the thermal impact on the excavation damaged zone (EDZ) in the near field are another important issue that was the goal of the TIMODAZ European research project. In this paper, some principles of waste disposal in clayey host rocks at great depth are first presented and a series of experimental investigations carried out on specific equipment specially developed to face the problem are presented. Both drained and undrained tests have been carried out to investigate the drained thermal volume changes of clays and claystone and the thermal pressurization occurring around the galleries. The importance of proper initial saturation (under in situ stresses) and of satisfactory drainage conditions (in spite of the significantly low permeability of claystones) is emphasized, leading to the development of a new hollow cylinder apparatus. It is observed that claystones cannot be considered as overconsolidated clays given that they can exhibit, as the Callovo-Oxfordian claystone does, a thermoplastic contraction. Mechanical and thermal hardenings are however observed, extending the knowledge already gained on clays to claystones. A new method of determining the thermal pressurization coefficient in the laboratory is described and the data obtained allow completing existing data in the field. Finally, the hollow cylinder apparatus makes it possible to demonstrate that the good self-sealing properties of clays and claystones can be extended to temperature effects, an important conclusion in terms of performance assessment.

International audience; In thermally enhanced recovery processes like cyclic steam stimulation (CSS) or steam assisted gravity drainage (SAGD), continuous steam injection entails changes in pore fluid, pore pressure and temperature in the rock reservoir, that are most often unconsolidated or weakly consolidated sandstones. This in turn increases or decreases the effective stresses and changes the elastic properties of the rocks. Thermally enhanced recovery processes give rise to complex couplings. Numerical simulations have been carried out on a case study so as to provide an estimation of the evolution of pressure, temperature, pore fluid saturation, stress and strain in any zone located around the injector and producer wells. The approach of Ciz and Shapiro (2007) - an extension of the poroelastic theory of Biot-Gassmann applied to rock filled elastic material - has been used to model the velocity dispersion in the oil sand mass under different conditions of temperature and stress. A good agreement has been found between these predictions and some laboratory velocity measurements carried out on samples of Canadian oil sand. Results appear to be useful to better interpret 4D seismic data in order to locate the steam chamber.

International audience; For evaluation of the undrained thermo-poro-elastic properties of saturated porous materials in conventional triaxial cells, it is important to take into account the effect of the dead volume of the drainage system. The compressibility and the thermal expansion of the drainage system along with the dead volume of the fluid filling this system, influence the measured pore pressure and volumetric strain during undrained thermal or mechanical loading in a triaxial cell. A correction method is presented in this paper to correct these effects during an undrained isotropic compression test or an undrained heating test. A parametric study has demonstrated that the porosity and the drained compressibility of the tested material and the ratio of the vol-ume of the drainage system to the one of the tested sample are the key parameters which influence the most the error induced on the measurements by the drainage system.

International audience; Highly compacted sand-bentonite mixtures are often considered as possible engineered barriers in deep high-level radioactive waste disposals. In-situ, the saturation of these barriers from their initially unsaturated state is a complex hydro-mechanical coupled process in which temperature effects also play a role. The key parameter of this process is the unsaturated hydraulic conductivity of the barrier. In this paper, isothermal infiltration experiments were conducted to determine the unsaturated hydraulic conductivity according to the instantaneous profile method. To do so, total suction changes were monitored at different locations along the soil specimen by using resistivity relative humidity probes. Three constant volume infiltration tests were conducted showing, unexpectedly, a decrease of the hydraulic conductivity during infiltration. One test performed under free-swell conditions showed the opposite and standard trend. These observations were interpreted in terms of microstructure changes during wetting, both under constant volume and free swell conditions.

International audience; The soil compaction by vehicles is a major factor responsible for physical degradation of cultivated soils. Uniaxial confined compression tests are usually performed to characterise the compaction properties of soil. Two main forms of compression curve have been observed: (i) the bi-linear curve having an elastic rebound curve at low stresses and a linear virgin compression curve at higher stresses; (ii) the S-shaped curve having deviation of the virgin compression curve at high stresses. In the present work, uniaxial confined compression tests were performed on four soils having various textures and different plasticity. Tests were performed on undisturbed and remould samples, at various initial dry bulk densities and water contents. The S-shaped compression curves were observed more frequently when the clay content and/or the initial water content were high. In addition, the S-shaped curves were observed more frequently on remould soils than on undisturbed soils. The difference between the compression of air-filled pores and that of meso-pores storing water subjected to high capillary forces could explain the observed S-shaped curves.

International audience; Thermal conductivity of compacted bentonite is one of the most important properties in the design of high-level radioactive waste repositories where this material is proposed for use as a buffer. In the work described here, a thermal probe based on the hot wire method was used to measure the thermal conductivity of compacted bentonite specimens. The experimental results were analyzed to observe the effects of various factors (i.e. dry density, water content, hysteresis, degree of saturation and volumetric fraction of soil constituents) on the thermal conductivity. A linear correlation was proposed to predict the thermal conductivity of compacted bentonite based on experimentally observed relationship between the volumetric fraction of air and the thermal conductivity. The relevance of this correlation was finally analyzed together with others existing methods using experimental data on several compacted bentonites.