Search

We fabricate gas-atomized particles by inductively melting electrode rods of HoB2-x (x = -0.3, 0, 0.3, and 1.0) and investigate the effect of non-stoichiometry on the phase fraction, microstructure, and physical properties. Shifting the stoichiometric ratio of the electrode rod to the B (Ho)-rich side increases HoB4 (Ho) phase in the resulting atomized particles. Even if the atomized particles contain 15-20 weight percent (wt.%) of the impurity phase, the influence of which on the physical properties is less severe: the maximum value of the magnetic entropy change is only reduced by 10% compared to HoB2.0 particles. We further find that the ductile Ho phase exists so as to fill the space between the brittle HoB2 phases in the atomized particles, which may be beneficial to the mechanical properties of the particles. Our findings suggest that it would be better to use the Ho-rich electrode rods than the stoichiometric ones to produce HoB2-x particles with more suitable properties as a magnetic refrigerant for magnetic refrigeration systems.

Processing magnetocaloric materials into magnetic refrigerants with appropriate shapes is essential for the development of magnetic refrigeration systems. In this context, the impact of processing on the physical properties of magnetocaloric materials is one of the important issues. Here, we investigate the crystallographic, magnetic, and magnetocaloric properties of gas-atomized particles of the intermetallic compound ErCo$_{2}$, a giant magnetocaloric material for low-temperature applications. The results demonstrate that the physical properties of ErCo$_{2}$ are significantly changed by atomization and subsequent thermal annealing. In the as-atomized particles, the magnetic transition temperature increases from 34 to 56 K and the phase transition changes from first order to second order. The thermal annealing shifts the transition temperature back to the original one and restores the first-order phase transition characteristic. The changes in magnetic properties are closely related to those in crystallographic properties, suggesting the importance of the magneto-structural coupling. The magnetic entropy change $-\Delta S_{M}$ of the particles can be tuned in size, shape, and peak temperature depending on the annealing conditions. The peak value of $-\Delta S_{M}$ varies in the range of 9--33 J kg$^{-1}$ K$^{-1}$ for a magnetic field change of 0--5 T. All the ErCo$_{2}$ atomized particles have magnetocaloric properties comparable or superior to other promising candidates for low-temperature magnetic refrigerants., Comment: Journal of Alloys and Compounds (in press)

For performing successful measurements within limited experimental time, efficient use of preliminary data plays a crucial role. This work shows that a simple feedforward type neural networks approach for learning preliminary experimental data can provide quick access to simulate the experiment within the learned range. The approach is especially beneficial for physical properties measurements with scanning on multiple axes, where derivative or integration of data are required to obtain the objective quantity. Due to its simplicity, the learning process is fast enough for the users to perform learning and simulation on-the-fly by using a combination of open-source optimization techniques and deep-learning libraries. Here such a tool for augmenting the experimental data is proposed, aiming to help researchers to decide the most suitable experimental conditions before performing costly experiments in real. Furthermore, this tool can also be used from the perspective of taking advantage of reutilizing and repurposing previously published data, accelerating data-driven exploration of functional materials., Comment: 19 pages, 5 figures + 7 pages of Supporting Information

The processing of promising magnetocaloric materials into spheres is one of the important issues on developing high-performance magnetic refrigeration systems. In the present study, we achieved in producing spherical particles of a giant magnetocaloric compound HoB2 by a crucible-free gas atomization process, despite its high melting point of 2350 C. The particle size distribution ranges from 100 to 710 micrometers centered at 212-355 micrometers with the highest yield of 14-20wt% of total melted electrode, which is suitable for magnetic refrigeration systems. The majority of the resulting particles are mostly spherical with no contamination during the processing, while unique microstructures are observed on the surface and inside. These spherical particles exhibit sharp magnetic transitions and huge magnetic entropy change of 0.34 J cm^{-3} K^{-1} for a magnetic field change of 5 T at 15.5 K. The high sphericality and the high magnetocaloric performance suggest that the HoB2 gas-atomized particles have good potential as magnetic refrigerants for use in magnetic refrigerators for hydrogen liquefaction., Comment: 6pages(double column), 6 figures

Analysis of XRD diffraction patterns is one of the keystones of materials science and materials research. With the advancement of data-driven methods for materials design, candidate materials can be quickly screened for the study of a desired physical property. Efficient methods to automatically analyze and identify phases present in a given pattern, are paramount for the success of this new paradigm. To aid this process, the open source python package Xray Estimation and Refinement Using Similarity (XERUS) for semi-automatic/automatic phase identification is presented. XERUS takes advantages of open crystal structure databases, not relying on proprietary databases, to obtain crystal structures on the fly, being then chemical space agnostic. By wrapping around GSASII, it can automatically simulate patterns and calculate similarity measures used for phase identification. Our approach is simple and quick but also applicable to multiphase identification, by coupling the similarity calculations with quick refinements followed by an iterative peak removal process. XERUS is shown in action in four different experimental datasets and also it is benchmarked against a recently proposed deep learning method for a mixture dataset covering the Li-Mn-O-F chemical space. XERUS will be freely available on https://www.github.com/pedrobcst/Xerus/

We report the fabrication of ErAl2 magnetocaloric wires by a powder-in-tube method (PIT) and the evaluation of magnetic entropy change through magnetization measurements. The magnetic entropy change of ErAl2 PIT wires exhibits similar behavior to the bulk counterpart, while its magnitude is reduced by the decrease in the volume fraction of ErAl2 due to the surrounding non-magnetic sheaths. We find that another effect reduces the magnetic entropy change of the ErAl2 PIT wires around the Curie temperature, and discuss its possible origin in terms of a correlation between magnetic properties of ErAl2 and mechanical properties of sheath material., Comment: This is the version of the article before peer review or editing, as submitted by an author to {insert name of Journal}. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at {https://dx.doi.org/10.1088/1361-6463/ab5c71}

We have successfully synthesized the c-axis oriented YBa2Cu4O8 (Y-124) film on a SrTiO3 (1 0 0) substrate via a coprecipitation and a dip-coating method. The precipitations including Y, Ba and Cu ions were obtained using their metal nitrates solution and the aqueous solution of sodium hydroxide and oxalic acid. Superconducting transition of the synthesized film was observed at 64-70 K corresponding to bulk Y-124 in the magnetization and resistance measurement. The developed method is suitable to synthesize superconducting Y-124 films for technological applications., Comment: 7 pages, 6 figures

We introduce a novel nanofabrication technique to directly deposit catalyst pads for the chemical vapor deposition synthesis of single-walled carbon nanotubes (SWCNTs) at any desired position on a substrate by Gallium focused ion beam (FIB) induced deposition of silicon oxide thin films from the metalorganic Tetraethyl orthosilicate (TEOS) precursor. A high resolution in the positioning of the SWCNTs is naturally achieved as the imaging and deposition by FIB are conducted concurrently in situ at the same selected point on the substrate. This technique has substantial advantages over the current state-of-the-art methods that are based on complex and multistep lithography processes.

Single crystals of Nd-substituted LuBa$_2$Cu$_4$O$_8$ were successfully grown by the KOH flux method. The single phase of Lu$_{1-x}$Nd$_x$Ba$_2$Cu$_4$O$_8$ [(Lu,Nd)124] formed at $x = 0.2$. The compound crystallized as orthorhombic Ammm structure with lattice constants of a = 3.835(3) {\AA}, b = 3.879(2) {\AA} and c = 27.195(6) {\AA}. Single crystal structural analysis demonstrated that the Nd ion partially occupied the Lu site. The (Lu,Nd)124 exhibited the superconducting transition at ~75 K in the magnetic susceptibility and resistivity. The $T_c$ and the c-axis of the (Lu,Nd)124 corresponded to Tm124. These results indicate that RE124 equivalent to the one composed of single RE element is obtained by combination of two RE elements., Comment: 12 pages, 5 figures

Candidates for new thermoelectric and superconducting materials, which have narrow band gap and flat bands near band edges, were searched by the high-throughput first-principles calculation from an inorganic materials database. The synthesized SnBi$_2$Se$_4$ among the target compounds showed a narrow band gap of 354 meV, and a thermal conductivity of 1 W/Km at ambient pressure. The sample SnBi$_2$Se$_4$ showed a metal-insulator transition at 11.1 GPa, as predicted by a theoretical estimation. Furthermore, the two pressure-induced superconducting transitions were discovered at under 20.2 GPa and 47.3 GPa. The data-driven search is a promising approach to discover new functional materials.

We report the pressure effect in Bi2Sr2Ca2Cu3O10+{\delta} (Bi-2223) single crystal with a small amount of intergrowth of Bi2Sr2CaCu2O8+{\delta} (Bi-2212). Their superconducting transition temperatures Tcs showed a domelike shape as a function of pressure, which showed a good agreement with the general relation between the carrier concentration and Tc. Our experimental results indicate that high pressure can induce effective carrier doping into the multilayered high-Tc cuprate superconductor, Comment: 8 pages including 5 figures

Sulfur-doped SnSe single crystal was successfully synthesized using a melt and slow-cooling method. The chemical composition and valence state of the obtained sample were analyzed by X-ray photoelectron spectroscopy. The pressure range of a diamond anvil cell with boron-doped diamond electrodes was upgraded to 104 GPa using nano-polycrystalline diamond anvil to investigate a pressure effect for the sample. Electrical resistivity measurements of sulfur-doped SnSe single crystal showed the insulator-metal-superconductor transition by applying high pressure up to 75.9 GPa.

Superconducting single crystals of Rb-intercalated FeSe compounds Rb$_x$Fe$_{2-y}$Se$_2$ were prepared by using a starting material of Rb$_2$Se as a Rb source. The superconducting properties and the surface microstructures were systematically controlled by varying the cooling rate in the quenching process. The higher cooling rate in the sample provided a higher superconducting transition temperature with highly connected superconducting mesh-like surface structure. Extremely slow-cooling process led to the complete isolation between the superconducting domains., Comment: 15 pages, 6 figures

One of the ultimate goals of the study of iron-based superconductors is to identify the common feature that produces the high critical temperature (Tc). In the early days, based on a weak-coupling viewpoint, the nesting between hole- and electron-like Fermi surfaces (FSs) leading to the so-called $s\pm$ state was considered to be one such key feature. However, this theory has faced a serious challenge ever since the discovery of alkali-metal-doped FeSe (AFS) superconductors, in which only electron-like FSs with a nodeless superconducting gap are observed. Several theories have been proposed, but a consistent understanding is yet to be achieved. Here we show experimentally that a hole-like band exists in KxFe2-ySe2, which presumably forms a hole-like Fermi surface. The present study suggests that AFS can be categorized in the same group as iron arsenides with both hole- and electron-like FSs present. This result provides a foundation for a comprehensive understanding of the superconductivity in iron-based superconductors., Comment: 15 pages, 4 figures, + supplemental material

We observed superconductivity ($T_{c}$ $\simeq$2-3 K) in Li$_{x}$RhB$_{y}$ intermetallics wherein $x$ and $y$ vary over a wide compositional range. The crystal structure consists of cubic unit-cell ($a$ $\simeq$ 12.1 \AA ) with centro-symmetric space group $Pn\bar{3}n$. A weak but positive pressure-induced increase of $T_{c}$ was observed. The correlations between the composition and each of the followings were followed over a wide range of $x$ and $y$: the unit-cell dimensions, $T_{c}$ , Sommerfeld coefficient $\gamma$, Debye temperature $\theta_{D}$, and critical fields $H$$_{c1}$ and $H$$_{c2}$. The thermal evolution of the electronic specific heat within the superconducting phase was observed to follow a quadratic-in-$T$ behavior. In addition, a paramagnetic Meissner Effect (PME) is manifested during a low-field-cooled magnetization cycle. This manifestation of quadratic-in-$T$ behavior and PME feature will be discussed., Comment: 6 pages, 8 figures, to appear in Materials Research Express (2014)

Single crystal of La(O,F)BiSe2 was successfully grown for the first time by the CsCl flux method. Single crystal X-ray structural analysis clearly showed that La(O,F)BiSe2 crystalizes with space group P4/nmm (lattice parameters a = 4.1408(2) {\AA}, c = 14.1096(6) {\AA}). The structure is composed of alternating BiSe2 and LaO layers. Magnetic susceptibility and resistivity measurements showed the superconducting transition at 3.6 K, which is higher than that of as-grown La(O,F)BiS2. The structural analysis implies that La(O,F)BiSe2 is potential superconductor having higher Tc under high pressure., Comment: 19 pages, 4 figures, 3 tables

We succeeded in growing single crystalline SmFeAsO1-xFx with exceptionally high fluorine concentration by using a CsCl flux method. Comparing to conventional flux methods, this method can introduce about double the amount of fluorine into the oxygen site. The obtained single crystal shows the highest superconducting transition temperature (Tc = 57.5 K) in single crystalline iron pnictides. In addition, the residual resistivity ratio (RRR) is almost three times as large as that of previously reported single crystals. This suggests that our single crystals are suitable for investigation of the intrinsic superconducting properties since they have few defects and impurities. Using both the Werthamer-Helfand-Hohenberg model and the effective mass model, we demonstrated that a higher fluorine concentration suppresses the anisotropic superconductivity of SmFeAsO1-xFx., Comment: 11 pages, 5 figures

Structural phase separation in A$_x$Fe$_{2-y}$Se$_2$ system has been studied by different experimental techniques, however, it should be important to know how the electronic uniformity is influenced, on which length scale the electronic phases coexist, and what is their spatial distribution. Here, we have used novel scanning photoelectron microscopy (SPEM) to study the electronic phase separation in K$_x$Fe$_{2-y}$Se$_2$, providing a direct measurement of the topological spatial distribution of the different electronic phases. The SPEM results reveal a peculiar interconnected conducting filamentary phase that is embedded in the insulating texture. The filamentary structure with a particular topological geometry could be important for the high T$_c$ superconductivity in the presence of a phase with a large magnetic moment in A$_x$Fe$_{2-y}$Se$_2$ materials., Comment: 14 pages,3 figures

Superconductivity is successfully induced by utilizing a battery-like reaction found in a typical Li-ion battery. Excess Fe in FeTe0.8S0.2 is electrochemically de-intercalated by applying a voltage in a citric acid solution. The superconducting properties improve with an increase in the applied voltage up to 1.5 V. This result suggests that an electrochemical reaction can be used as a novel method to develop new superconducting materials., Comment: 12 pages, 3 figures

We show the observation of the coexistence of bulk superconductivity and ferromagnetism in CeO1-xFxBiS2(x = 0 - 1.0) prepared by annealing under high-pressure. In CeO1-xFxBiS2 system, both superconductivity and two types of ferromagnetism with respective magnetic transition temperatures of 4.5 K and 7.5 K are induced upon systematic F substitution. This fact suggests that carriers generated by the substitution of O by F are supplied to not only the BiS2 superconducting layers but also the CeO blocking layers. Furthermore, the highest superconducting transition temperature is observed when the ferromagnetism is also enhanced, which implies that superconductivity and ferromagnetism are linked to each other in the CeO1-xFxBiS2 system., Comment: 25 pages, 6 figures

We report $^{77}$Se-nuclear magnetic resonance (NMR) results down to sufficiently low temperatures under magnetic fields parallel to both the $ab$-plane and the c-axis in a paramagnetic/superconducting (PM/SC) phase of K$_x$Fe$_{2-y}$Se$_2$. The observation of anisotropy in the orbital part of the Knight shift results in the anisotropy of its spin part increasing on approaching the transition temperature. The anisotropy of the Korringa relation suggests the presence of the weak spin fluctuations with a finite wave vector $\bm{q}$, which induce the magnetic fluctuations along the ab-plane at the Se site. Such fluctuations do not correspond to the stripe $(\pi,0)$ correlation of the Fe moment observed in many Fe-based superconductors, and are not contradictory to weak $(\pi,\pi)$ correlations. The nuclear spin-lattice relaxation rate $1/T_1$ shows a field-independent $T_1T \sim const.$ behavior at low temperatures for $H \parallel ab$, which is attributed to the nonzero density of states at the Fermi level and can be explained by the sign-changing order parameter even for nodeless gaps. The temperature dependence of $1/T_1$ is reproduced well by nodeless models with two isotropic gaps or a single anisotropic gap. The obtained gap magnitude in the isotropic two-gap model is comparable to those obtained in the angle-resolved photoemission spectroscopy experiments., Comment: 6 pages, 6 figures, Accepted for the publication in J. Phys. Soc. Jpn

We have successfully synthesized FeSe films by the electrochemical deposition in the electrolyte containing FeCl_{2}\cdot4H_{2}O, SeO_{2} and Na_{2}SO_{4}. The composition ratio of Fe and Se was controlled by the synthesis voltage and pH value. The FeSe film with the composition ratio of Fe : Se = 1 : 1 is fabricated at a voltage of -0.9 V and pH 2.1 in our electrochemical deposition. This sample has a highly crystalline tetragonal FeSe structure and exhibits a superconducting transition at 8.1 K, comparable to FeSe synthesized by other methods.

We investigated pressure effects on transition temperature (Tc) of the new iron-based superconductor K0.8Fe2Se2 using a BeCu/NiCrAl hybrid-type clamped piston-cylinder cell. The Tc(onset) was 33K at 0.85 GPa. With increasing pressure, Tc(onset) gradually increased and reached 36.6 K at 2.03 GPa., Comment: 8 pages, 3 figures

Quantized bound states at a vortex core are discretized in YNi$_2$B$_2$C. By using scanning tunneling spectroscopy with an unprecedented 0.1 nm spatial resolution, we find and identify the localized spectral structure, where in addition to the first main peak with a positive low energy, a second subpeak coming from the fourfold symmetric gap structure is seen inside the energy gap. Those spectral features are understood by solving the Bogoliubov-de Gennes equation for a fully three-dimensional gap structure. A particle-hole asymmetric spectrum at the core site and quantum oscillation in the spectra are clearly observed., Comment: 5 pages, 4 figures

The superconducting FeSe films were successfully fabricated using the electrochemical synthesis. The composition ratio of Fe and Se can be controlled by the electric potential and pH value. We found that the FeSe films deposited at the electric potential -1.75 V and pH 2.3 show the superconducting transition at 3.5 K. The establishment of this electrochemical synthesis technique will provide many advantages for application., Comment: 15 pages, 6 figures

We synthesized the new Fe-based superconductor K0.8Fe2Se2 single crystals. The obtained single crystal exhibited a sharp superconducting transition, and the onset and zero-resistivity temperature was estimated to be 33 and 31.8 K, respectively. A high upper critical field of 192 T was obtained. Anisotropy of superconductivity of K0.8Fe2Se2 was ~3.6. Both the high upper critical field and comparably low anisotropy are advantageous for the application under high magnetic field., Comment: 9 pages, 4 figures

The nature of five-quadrant magnetic isotherms for is different from that for in a single crystal of YNi2B2C, pointing towards an anisotropic behaviour of the flux line lattice (FLL). For, a well defined peak effect (PE) and second magnetization peak (SMP) can be observed and the loop is open prior to the PE. However, for, the loop is closed and one can observe only the PE. We have investigated the history dependence of magnetization hysteresis data for by recording minor hysteresis loops. The observed history dependence in across different anomalous regions are rationalized on the basis of su-perheating/supercooling of the vortex matter across the first-order-like phase transition and possible additional effects due to annealing of the disordered vortex bundles to the underlying equilibrium state., Comment: 4 pages, 4 figures

We present magnetic field dependence of the critical current density from dc-magnetization measurements concerning the anisotropic behavior of flux line lattice (FLL) in a single crystal of YNi_2B_2C. The peak effect (PE) phenomenon is observed for all crystallographic orientations, but the second magnetization peak (SMP) anomaly is observed only for H//a. Our study reveals that the FLL obtained when H//[100] is better ordered within the basal plane. However, the FLL for H// c is found to be even more ordered than that for H//[110]. The perfect square symmetry of the FLL for H//c is perhaps responsible for promoting the realization of the best spatial order of the FLL prior to the onset of PE, indicating a correlation between the crystalline lattice and the FLL. We have also found a change over in the power law governing the decay of the critical current density which is identified as a crossover from weak to weaker pinning regime in the phase diagram., Comment: 19 pages, 6 figures

We have performed soft x-ray and ultrahigh-resolution laser-excited photoemission measurements on tetragonal FeSe, which was recently identified as a superconductor. Energy dependent study of valence band is compared to band structure calculations and yields a reasonable assignment of partial densities of states. However, the sharp peak near the Fermi level slightly deviates from the calculated energy position, giving rise to the necessity of self-energy correction. We have also performed ultrahigh-resolution laser photoemission experiment on FeSe and observed the suppression of intensity around the Fermi level upon cooling., Comment: 6 pages, 3 figures

Critical temperature Tc of the Li2(Pd1-xPtx)3B was reported to be 7-8K for x=0 and 2.2-2.8K for x=1. In this article we present our preliminary results on behavior of magnetization-temperature curves with starting composition of Pd-B precursor, y-Li concentration in LiyPd3B and post-annealing of the Pd-end compound. Results suggest that to maximize Tc ratio Pd:B should be close to 3:1, while y-Li has to be optimum. The lowest Tc for LiyPd3B was 4.4-4.6K, while post-annealings at 560 deg. C allowed enhancement of Tc up to 8.2-8.4K. Compositions Li2Z3B with Z=Ni, Ru, Rh, Re, Ag are not superconducting down to 1.8K. Exception is composition with Re showing superconductivity due to Re3B compound. All samples were prepared by arc melting., Comment: 6 pages, 5 figs. presented at M2S, 2006