Search

We investigate the use of ultra-narrow band interference filters to enable daytime use of sodium laser guide star adaptive optics systems. Filter performance is explored using theoretical and vendor supplied filter transmission profiles, a modeled daylight sky background, broadband measurements of the daytime sky brightness on Maunakea, and an assumed photon return from the sodium laser guide star and read noise for the wavefront sensor detector. The critical parameters are the bandpass of the filter, the out-of-band rejection, and the peak throughput at the wavelength of the laser guide star light. Importantly, a systematic trade between these parameters leads to potentially simple solutions enabling daytime observations. Finally, we simulated the Mid-Infrared Adaptive Optics (MIRAO) system planned for the Thirty Meter Telescope with an end-to-end simulation, folding in daytime sky counts. We find that MIRAO with five sodium laser guide stars, commercial off-the-shelf filters to suppress the sky background in the laser guide star wavefront sensors, and a near-infrared natural guide star ($K \le 13$) tip/tilt/focus wavefront sensor can attain daytime Strehl ratio values comparable to those at night., Comment: 24 pages, 5 figures, submitted for publication in SPIE JATIS

The Hokupa'a-85 curvature adaptive optics system components have been adapted to create a new AO-corrected coud\'{e} instrument at the 3.67m Advanced Electro-Optical System (AEOS) telescope. This new AO-corrected optical path is designed to deliver an f/40 diffraction-limited focus at wavelengths longer than 800nm. A new EMCCD-based dual-beam imaging polarimeter called InnoPOL has been designed and is presently being installed behind this corrected f/40 beam. The InnoPOL system is a flexible platform for optimizing polarimetric performance using commercial solutions and for testing modulation strategies. The system is designed as a technology test and demonstration platform as the coud\'{e} path is built using off-the-shelf components wherever possible. Models of the polarimetric performance after AO correction show that polarization modulation at rates as slow as 200Hz can cause speckle correlations in brightness and focal plane location sufficient enough to change the speckle suppression behavior of the modulators. These models are also verified by initial EMCCD scoring camera data at AEOS. Substantial instrument trades and development efforts are explored between instrument performance parameters and various polarimetric noise sources., Comment: Copyright 2015 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. DOI http://dx.doi.org/10.1117/12.2056667

We report here the highest resolution near-IR imaging to date of the HD 141569A disc taken as part of the NICI Science Campaign. We recover 4 main features in the NICI images of the HD 141569 disc discovered in previous HST imaging: 1) an inner ring / spiral feature. Once deprojected, this feature does not appear circular. 2) an outer ring which is considerably brighter on the western side compared to the eastern side, but looks fairly circular in the deprojected image. 3) an additional arc-like feature between the inner and outer ring only evident on the east side. In the deprojected image, this feature appears to complete the circle of the west side inner ring and 4) an evacuated cavity from 175 AU inwards. Compared to the previous HST imaging with relatively large coronagraphic inner working angles (IWA), the NICI coronagraph allows imaging down to an IWA of 0.3". Thus, the inner edge of the inner ring/spiral feature is well resolved and we do not find any additional disc structures within 175 AU. We note some additional asymmetries in this system. Specifically, while the outer ring structure looks circular in this deprojection, the inner bright ring looks rather elliptical. This suggests that a single deprojection angle is not appropriate for this system and that there may be an offset in inclination between the two ring / spiral features. We find an offset of 4+-2 AU between the inner ring and the star center, potentially pointing to unseen inner companions., Comment: 14 pages, 13 figures, accepted to MNRAS

We present J, H, CH_4 short (1.578 micron), CH_4 long (1.652 micron) and K_s-band images of the dust ring around the 10 Myr old star HR 4796 A obtained using the Near Infrared Coronagraphic Imager (NICI) on the Gemini-South 8.1 meter Telescope. Our images clearly show for the first time the position of the star relative to its circumstellar ring thanks to NICI's translucent focal plane occulting mask. We employ a Bayesian Markov Chain Monte Carlo method to constrain the offset vector between the two. The resulting probability distribution shows that the ring center is offset from the star by 16.7+/-1.3 milliarcseconds along a position angle of 26+/-3 degrees, along the PA of the ring, 26.47+/-0.04 degrees. We find that the size of this offset is not large enough to explain the brightness asymmetry of the ring. The ring is measured to have mostly red reflectivity across the JHK_s filters, which seems to indicate micron-sized grains. Just like Neptune's 3:2 and 2:1 mean-motion resonances delineate the inner and outer edges of the classical Kuiper Belt, we find that the radial extent of the HR 4796 A and Fomalhaut rings could correspond to the 3:2 and 2:1 mean-motion resonances of hypothetical planets at 54.7 AU and 97.7 AU in the two systems, respectively. A planet orbiting HR 4796 A at 54.7 AU would have to be less massive than 1.6 Mjup so as not to widen the ring too much by stirring., Comment: Accepted to A&A for publication on April 23, 2014 (15 pages, 9 figures, 4 tables)

We have completed a high-contrast direct imaging survey for giant planets around 57 debris disk stars as part of the Gemini NICI Planet-Finding Campaign. We achieved median H-band contrasts of 12.4 mag at 0.5" and 14.1 mag at 1" separation. Follow-up observations of the 66 candidates with projected separation < 500 AU show that all of them are background objects. To establish statistical constraints on the underlying giant planet population based on our imaging data, we have developed a new Bayesian formalism that incorporates (1) non-detections, (2) single-epoch candidates, (3) astrometric and (4) photometric information, and (5) the possibility of multiple planets per star to constrain the planet population. Our formalism allows us to include in our analysis the previously known Beta Pictoris and the HR 8799 planets. Our results show at 95% confidence that 5MJup planet beyond 80 AU, and 3MJup planet outside of 40 AU, based on hot-start evolutionary models. We model the population of directly-imaged planets as d^2N/dMda ~ m^alpha a^beta, where m is planet mass and a is orbital semi-major axis (with a maximum value of amax). We find that beta < -0.8 and/or alpha > 1.7. Likewise, we find that beta < -0.8 and/or amax < 200 AU. If we ignore the Beta Pic and HR 8799 planets (should they belong to a rare and distinct group), we find that < 20% of debris disk stars have a > 3MJup planet beyond 10 AU, and beta < -0.8 and/or alpha < -1.5. Our Bayesian constraints are not strong enough to reveal any dependence of the planet frequency on stellar host mass. Studies of transition disks have suggested that about 20% of stars are undergoing planet formation; our non-detections at large separations show that planets with orbital separation > 40 AU and planet masses > 3 MJup do not carve the central holes in these disks., Accepted to ApJ on June 24, 2013. 67 pages, 17 figures, 12 tables

There are different techniques to sense the wavefront phase-distortions due to atmospheric turbulence. Curvature sensors are practical in their sensitivity being adjustable to the prevailing atmospheric conditions. Even at the best sites, the turbulence intensity has been found to vary at times over only a few minutes and regularly over longer periods. Two methods to automatically adjust the sensitivity of a curvature sensor are proposed: First, the defocus distance can be adjusted prior to the adaptive-optics (AO) loop through the acquisition of a long exposure image and can then be kept constant. Secondly, the defocus distance can be changed during the AO loop, based on the voltage values sent to the deformable mirror. We demonstrate that the performance increase - assessed in terms of the image Strehl-ratio - can be significant., Comment: Accepted for publication in the adaptive-optics feature of Applied Optics