Search

Normal contact behaviour between non-adhesive fractal rough particles is studied using a finite element method (FEM). A series of spherical grain surfaces with distinguished roughness features are generated by means of Spherical Harmonics. These surfaces are described by two roughness descriptors, namely, relative roughness (Rr) and fractal dimension (FD). The contact behaviour of rough spheres with a rigid flat surface is simulated using FEM to quantify the influences of surface structure and sphere morphology by focusing on contact stiffness and true contact area. The dependence of normal contact stiffness (k) on applied normal force (F) is found to follow a power law (k = αFβ) over four orders of magnitude, with both α and β being highly correlated with Rr and FD. With increasing load, the power exponent converges to that of Hertzian contact, e.g., 1/3, independent of Rr. Regions of true contact evolve through the formation of new microcontacts and their progressive merging, meanwhile the area distributions of contact island induced by various forces tend to obey similar Weibull distributions due to fractal nature in their surfaces. Contacts with larger values of Rr are found to produce contact contours with higher fractal dimension as calculated by a 2D box-counting method. Our results suggest that the correlation between radial lengths in a quasi-spherical particle should be considered in studying contact behaviour.

International audience; Tribological phenomena are governed by combined effects of material properties, topology and surface-chemistry. We study the interplay of multiscale-surface-structures with molecular-scale interactions towards interpreting static frictional interactions at fractal interfaces. By spline-assisted-discretization we analyse asperity interactions in pairs of contacting fractal surface profiles. For elastically deforming asperities, force analysis reveals greater friction at surfaces exhibiting higher fractality, with increasing molecular-scale friction amplifying this trend. Increasing adhesive strength yields higher overall friction at surfaces of lower fractality owing to greater true-contact-area. In systems where adhesive-type interactions play an important role, such as those where cold-welded junctions form, friction is minimised at an intermediate value of surface profile fractality found here to be in the regime 1.3-1.5. Our results have implications for systems exhibiting evolving surface structures.https://doi.org/10.1016/j.triboint.2015.09.016; Les phénomènes tribologiques sont régis par les effets combinés des propriétés des matériaux, de la topologie et de la chimie des surfaces. Nous étudions l’interaction des structures de surface multi-échelles avec les interactions à l’échelle moléculaire pour interpréter les interactions frictionnelles statiques aux interfaces fractales. Par discrétisation assistée par spline, nous analysons les interactions d’asperité par paires de profils de surface fractale en contact. Pour les aspérités se déformant élastiquement, l'analyse de la force révèle un frottement plus important sur les surfaces présentant une fractalité plus élevée, le frottement croissant à l'échelle moléculaire amplifiant cette tendance. L'augmentation de la force adhésive engendre un frottement global plus élevé sur les surfaces de fractalité inférieure en raison d'une plus grande surface de contact. Dans les systèmes où les interactions de type adhésif jouent un rôle important, tels que ceux où se forment des jonctions soudées à froid, le frottement est minimisé à une valeur intermédiaire de la fractalité du profil de surface qui se situe autour de 1,3–1,5. Les résultats ont des implications pour les systèmes présentant des structures de surface en évolution.https://doi.org/10.1016/j.triboint.2015.09.016

Liquid bridges are commonly encountered in nature and the liquid transfer induced by their rupture are widely used in various industrial applications. In this work, with the focus on the porous tip, we studied the impacts of capillary effects on the liquid transfer induced by the rupture through numerical simulations. To depict the capillary effects of a porous tip, a time scale ratio, R_T, is proposed to compare the competing mechanisms of spontaneous imbibitiona and external drag. In terms of R_T, we then develop a theoretical model for estimating the liquid retention ratio considering the geometry, porosity and wettability of tips. The mecahnism presented in this work provides a possible approach to control the liquid transfer with better accuracy in microfluidics or microfabrications.

We experimentally and numerically examine stress-dependent electrical transport in granular materials to elucidate the origins of their universal dielectric response. The ac responses of granular systems under varied compressive loadings consistently exhibit a transition from a resistive plateau at low frequencies to a state of nearly constant loss at high frequencies. By using characteristic frequencies corresponding to the onset of conductance dispersion and measured direct-current resistance as scaling parameters to normalize the measured impedance, results of the spectra under different stress states collapse onto a single master curve, revealing well-defined stress-independent universality. In order to model this electrical transport, a contact network is constructed on the basis of prescribed packing structures, which is then used to establish a resistor-capacitor network by considering interactions between individual particles. In this model the frequency-dependent network response meaningfully reproduces the experimentally observed master curve exhibited by granular materials under various normal stress levels indicating this universal scaling behaviour is found to be governed by i) interfacial properties between grains and ii) the network configuration. The findings suggest the necessity of considering contact morphologies and packing structures in modelling electrical responses using network-based approaches., Comment: 12 pages, 4 figures

This work presents a combined experimental and theoretical study of dynamic contact angle hysteresis using liquid bridges under cyclic compression and stretching between two identical plates. Under various loading rates, contact angle hysteresis for three different liquids was measured by examination of advancing and receding angles in liquid bridges, and the capillary forces were recorded. It is found that, for a given liquid, the hysteretic phenomenon of the contact angle is more pronounced at higher loading rates. By unifying the behaviour of the three liquids, power-law correlations were proposed to describe the relationship between the dynamic contact angle and the capillary number for advancing and receding cases. It is found that the exponents of obtained power-law correlations differ from those derived through earlier methods (e.g., capillary rise), due to the different kinematics of the triple-line. The various hysteretic loops of capillary force in liquid bridges under varied cyclic loading rates were also observed, which can be captured quantitatively by the prediction of our developed model incorporating the dynamic contact angle hysteresis. These results illustrate the importance of varying triple-line geometries during dynamic wetting and dewetting processes, and warrant an improved modelling approach for higher level phenomena involving these processes, e.g., multiphase flow in porous media and liquid transfer between surfaces with moving contact lines., Comment: 24 pages, 6 figures