Search

Data centers account for 1.5% of the energy consumption in the United States according to a recent report by the Environmental Protection Agency. These facilities' IT power and cooling requirements may increase in the future, especially with the rise of cloud computing and increased heat densities of servers. Since most utility power is generated by burning coal or fossil fuel, innovation is essential to meet the challenge of providing sustainable cooling and power for data centers. This paper proposes using Hydrothermal Energy for data centers whereby cooling and power are both sustainably generated. Coastal communities that have nearby cold and warm water resources are candidates for future data centers that can be operated completely off the grid while absorbing carbon from the atmosphere. The paper acknowledges that, while there are still challenges to be met in designing these facilities, Hydrothermal Net-Zero Energy data centers are within the realm of possibility. [ABSTRACT FROM AUTHOR]

The U.S. Army Corps of Engineers, in collaboration with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), academia, and private sector subject matter experts, recently completed an energy study to evaluate potential site and source energy-use reduction in new Army buildings. The study was completed in response to the mandates for energy savings in federal buildings enacted by the U.S. Energy Independence and Security Act of 2007 (U.S. Congress 2007). The building types studied included an Unaccompanied Enlisted Personnel Housing (UEPH or barracks), a brigade headquarters (administrative building), a company operation facility, a maintenance facility, and a dining facility (DFAC). The study was conducted for representative locations in all 15 DOE identified climate zones in the United States with building designs adapted to these climatic conditions. This paper presents the results of the energy analysis for a typical Army dining facility. It discusses energy efficiency measures and combinations used to reduce both internal and external loads on the building and overall energy use. The largest load in a DFAC is the cooking, and the currently available best-in-class kitchen equipment is included in the final design. The potential site energy savings compared to the energy code range from 21% to 38%. The potential source energy savings compared to Commercial Building Energy Consumption Survey ranges from 37% to 42%. Additional savings may be obtained if an efficient cogeneration system is used and the building is considered as a part of the building cluster or community to fully utilize the energy from the cogeneration system. [ABSTRACT FROM AUTHOR]

The Army is required by law (EPACT 2005, EISA 2007) to eliminate fossil fuel use in new and renovated facilities by 2030 and to reduce overall facility energy usage by 30% by 2015. Army policy is to achieve eight net zero energy pilot installations by 2020, 25 net zero energy installations by 2031, and for all installations to achieve net zero energy status by 2058. Achieving Net Zero Energy (NZE) will only be possible if an optimum mix of demand reduction and renewable sources are put in place at a community (installation) or building cluster scale. The Army operates what are essentially small campuses, or clusters of buildings on its installations. The US Department of Energy (DOE) is focused on the national grid scale or on individual buildings, while the commercial focus is on retrofits to individual buildings. There are only few case studies worldwide that address dynamics of energy systems at the community scale, and to date, there is a lack of tools to perform that task. The building stock at most US Army installations is complex and includes a mix of high and low energy use buildings. Energy use in these buildings varies due to the different military mission and requirements for each building, installation growth and expansion, and soldier deployment. Achieving net zero energy economically at such installations will require a seamless blend of energy conservation in individual buildings and building systems automation, utility management and control, and power delivery systems that have the capability to offer integration of on-site power generation (including renewable energy sources). This paper describes the Net Zero fossil fuel based energy optimization process and illustrates it with an example based on the results of study conducted for a cluster of buildings at Fort Irwin, CA. The integrated optimization process is being developed under the Army research and development project "Modeling Net Zero Installations - Energy (NZI-E)" and the International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems (ECBCS) Annex 51. The process is stepped, beginning with the optimization of each building to achieve the most cost effective energy efficient optimization of building envelope and energy using systems. Then energy saving measures affecting the total building cluster are optimized taking advantages of the diversification between energy intensities, scheduling, and waste energy streams utilization. The energy demands of the resulting energy-use optimized cluster will require the minimum sized renewable energy system needed to make the building cluster Net Zero fossil fuel energy. [ABSTRACT FROM AUTHOR]

Data Centers are an ever increasing user of energy in our economy. While the performance per watt of our IT equipment continues to increase exponentially, this energy performance improvement is still outstripped by increasing demand. Because of this, the efficiency of data centers must continue to improve. Beyond just efficiency, many data centers now are working towards reuse of their waste energy in other areas in the data center or on the site or campus. How to account for this, through metrics and measurements, is the topic of this paper. The Energy Reuse Effectiveness metric or ERE is discussed; both the development and application of the metric are looked at in detail. The use of ERE in conjunction with PUE (Power Usage Effectiveness) is also considered. [ABSTRACT FROM AUTHOR]