Search

The operation conditions for the implementation of the Fenton process are of utmost importance because there are problems related to the proportion of H2O2 dosage to COD and Fe2+ dosage to the specified H2O2 amount. The relevant literature shows that COD/H2O2 ratios range between 0.0084 and 113.9. Similarly, the COD/Fe2+ ratio varies between 0.079 and 292.6, while the H2O2/Fe2+ ratio varies between 0.09 and 287. Moreover, the ratio of the maximum value to the minimum value used in the operations on the basis of COD is 13560 for COD/H2O2 (0.0084-113.9), 2210 for COD/Fe2+ (0.079-174.7), and finally 3190 for H2O2/Fe2+ (0,09-287). The aim of this study was to re-evaluate these values that significantly differ from each other with specific emphasis on textile wastewater and considering stoichiometric ratios. Results showed that values ranging between 0.43 and 4.0 for COD/H2O2 and those ranging between 0.75 and 3.0 for H2O2/Fe2+ are more suitable. The results showed that in a Fenton process conducted by dosing H2O2 at different times, the TOC reduction efficiencies increased from 80.8 up to 88.9%. Similarly, the color reduction efficiency also rose from 96.5 to 98.7%. [ABSTRACT FROM AUTHOR]

The study investigated the pretreatment of real paracetamol (PCT) wastewater of a pharmaceutical industry by Fenton process. At the best experimental conditions (COD/H2O2 = 1/1, Fe+2/H2O2 = 1/70, settling method:centrifuging, pH 6 at settling step), 92.7, 92.7, 95.5, 99.1, 99.9 and 99.4% of chemical oxygen demand (COD), total organic carbon (TOC), 5-day biological oxygen demand (BOD5), PCT, para-amino phenol (PAP) and aniline were removed, respectively. Changes in the concentrations of these parameters were also investigated for both oxidation and settling steps of Fenton process. It was found that COD and TOC were removed at the settling step (precipitation) whereas PCT, PAP and aniline were removed at the oxidation step. Mass balance calculations were also studied to show the mass distributions of COD in different phases (gas + foam, effluent and sludge). Fenton process was found as an effective method for the pretreatment of real PCT wastewater for discharging in a determined collective treatment plant. [ABSTRACT FROM AUTHOR]