Search

The current study analyzed the root causes of 22 helicopter accidents/incidents that took place between 1998 and 2019. Each root cause was coded using three commonly used classification models in aviation HFACS, ATSB, and IATA to identify recurring factors for better targeting of future prevention strategies. The frequency analysis revealed that not following procedure (22 observations), training inadequate or unavailable (17), inadequate regulatory oversight (17), inadequate procedure guidance (16), company management absent or deficient (10) and incorrect manuals/charts/checklists (9) were the most frequent contributing factors. Since none of the existing models could summarize the root causes of 22 occurrences effectively, a scenario-based human-machine-environment-procedure (HMEP) classification scheme was proposed to use organizational influences, people management, technical failure, procedure and document, and environment as the first-layer subcategories. The HMEP scheme was additionally applied to the analysis and coding of 4 helicopter accidents in the USA published by the NTSB. The HMEP scheme revealed that NTSB had identified a significantly greater number of root causes in the manufacturer design, manufacturing & documentation. Overall, HMEP can be used to guide the data collection during accident investigation and subsequently to aggregate aviation accidents to derive recurring factors and compare accident patterns in an efficient manner., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The current study illustrates the icon design process for 20 functions for a smart living room and smart bathroom of a commercial smart building control system. For each function name, seven icon formats (image-related, concept-related, semi-abstract, arbitrary, word, abbreviation, and combined) were developed by 30 graduate students and compared with a preference ranking test by another 13 executive MBA students. The results indicated that the combined, image-related, concept-related, semi-abstract, word, and abbreviation each had nine, four, three, two, one and one function names ranked as the most preferred format, respectively. Since all the design formats except the arbitrary format were ranked as the most preferred at least once, it is worthwhile to generate seven icon formats for a given function and chose the most preferred based on the ranking test result. The participatory design and ranking test evaluation approach can be applied for the design and evaluation of visual icons in other application contexts., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The current study analyzed 312 caught-in-between fatalities caused by machinery and vehicles. A comprehensive and mutually exclusive coding scheme was developed to analyze and code each caught-in-between fatality in terms of age, gender, experience of the victim, type of industry, source of injury, and causes for these accidents. Boolean algebra analysis was applied on these 312 caught-in-between fatalities to derive minimal cut set (MCS) causes associated with each source of injury. Eventually, contributing factors and common accident patterns associated with (1) special process machinery including textile, printing, packaging machinery, (2) metal, woodworking, and special material machinery, (3) conveyor, (4) vehicle, (5) crane, (6) construction machinery, and (7) elevator can be divided into three major groups through Boolean algebra and MCS analysis. The MCS causes associated with conveyor share the same primary causes as those of the special process machinery including textile, printing, packaging and metal, woodworking, and special material machinery. These fatalities can be eliminated by focusing on the prevention measures associated with lack of safeguards, working on a running machine or process, unintentional activation, unsafe posture or position, unsafe clothing, and defective safeguards. Other precise and effective intervention can be developed based on the identified groups of accident causes associated with each source of injury., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Twenty-one experienced drivers were recruited for the evaluation of sounds of four functions (horn, indicator, door open warning, and parking sensor) made by 11 car brand names. Each participant was required to evaluate all of the above sound signals by a pair-comparison test. After the comparison test, each participant was shown his/her pair-comparison result and was asked to comment on their preference and appropriateness of a sound. The physical properties and interview data were compared and summarized to propose design recommendations. Our results indicate that complex tones and a fundamental frequency around 450 Hz were most preferred for horns while for indicators the preferred sounds had a higher dominant frequency [corrected].To reduce monotony, the indicators with double clicks and an OFF time interval of between 330 and 400 ms between two clicks were most preferred. Regarding door warning sounds, the waveform starting with a higher intensity then fading towards zero intensity is most preferred while for parking sensors, sounds beginning with a longer OFF time (about 500 ms) and having 3 or 4 distinctive tempo variations were most preferred. The relationship between pleasurability and pitch, loudness, and the tempo of sound signals basically followed an inverted-U function. Sound designers should avoid using very extreme parameter values when generating sound for a given function., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The current research classified 82 vehicle icons into seven categories (image-related, concept-related, semi-abstract, arbitrary, abbreviation, word, and combined) for their matching accuracy, matching sequence, and matching time. These data can be compared and used as a framework for future icon development. Forty participants, all with a university degree, took part in this experiment. Half of the participants had intensive driving experience, while the other half never driven a car. The results indicated that on average, word icons had a significantly greater matching accuracy than the other icon formats; ranging from 4.7 to 20.8% difference. Regarding the matching sequence, participants matched image-related icons before other icon formats. Arbitrary and combined icons took significantly longer to match than other icon formats by 1.4-6.2 s. Based on the high matching accuracy (86.3%) and high ratings on subjective design features, word format can be used for functions describable using simple English for users with English reading ability. Confusion matrices showed that 63.2% of the misunderstandings were caused by similarity in format or function., (Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.)

Contributing factors to 621 occupational fatal falls have been identified with respect to the victim's individual factors, the fall site, company size, and cause of fall. Individual factors included age, gender, experience, and the use of personal protective equipment (PPE). Accident scenarios were derived from accident reports. Significant linkages were found between causes for the falls and accident events. Falls from scaffold staging were associated with a lack of complying scaffolds and bodily action. Falls through existing floor openings were associated with unguarded openings, inappropriate protections, or the removal of protections. Falls from building girders or other structural steel were associated with bodily actions and improper use of PPE. Falls from roof edges were associated with bodily actions and being pulled down by a hoist, object or tool. Falls through roof surfaces were associated with lack of complying scaffolds. Falls from ladders were associated with overexertion and unusual control and the use of unsafe ladders and tools. Falls down stairs or steps were associated with unguarded openings. Falls while jumping to a lower floor and falls through existing roof openings were associated with poor work practices. Primary and secondary prevention measures can be used to prevent falls or to mitigate the consequences of falls and are suggested for each type of accident. Primary prevention measures would include fixed barriers, such as handrails, guardrails, surface opening protections (hole coverings), crawling boards/planks, and strong roofing materials. Secondary protection measures would include travel restraint systems (safety belt), fall arrest systems (safety harness), and fall containment systems (safety nets).