Search

The Community Multiscale Air Quality (CMAQ) model has been used for regulatory purposes at the US EPA and in the research community for decades. In 2012, we released the WRF-CMAQ coupled model that enables aerosol information from CMAQ to affect meteorological processes through direct effects on shortwave radiation. Both CMAQ and WRF-CMAQ are considered limited area models. Recently, we have extended domain coverage to global scale linking the meteorological Model for Prediction Across Scales – Atmosphere (MPAS-A, hereafter referred simply to as MPAS) with CMAQ to form the MPASCMAQ global coupled model. To configure these three different models, i.e. CMAQ (offline), WRF-CMAQ, and MPASCMAQ, we have developed the Advanced Air Quality Modelling System (AAQMS) for constructing each of them effortlessly. We evaluate this newly-built MPAS-CMAQ coupled model using two global configurations: a 120 km uniform mesh and a 92–25 km variable mesh with the finer area over North America. Preliminary computational tests show good scalability and model evaluation, a three years simulation (2014–2016) for the uniform mesh case and a monthly simulation of January and July 2016 for the variable mesh case, on ozone and PM2.5, show reasonable performance with respect to observations. The 92–25 km configuration has a high bias in wintertime surface ozone across the United States and this bias is consistent with the 120 km result. Summertime surface ozone in the 92–25 km configuration is less biased than the 120 km case. The MPAS-CMAQ system reasonably reproduces the daily variability of daily average PM from the Air Quality System (AQS) network. [ABSTRACT FROM AUTHOR]

The Community Multiscale Air Quality (CMAQ) model version 5.3 (CMAQ53), released to the public in August 2019 and followed by version 5.3.1 (CMAQ531) in December 2019, contains numerous science updates, enhanced functionality, and improved computation efficiency relative to the previous version of the model, 5.2.1 (CMAQ521). Major science advances in the new model include a new aerosol module (AERO7) with significant updates to secondary organic aerosol (SOA) chemistry, updated chlorine chemistry, updated detailed bromine and iodine chemistry, updated simple halogen chemistry, the addition of dimethyl sulfide (DMS) chemistry in the CB6r3 chemical mechanism, updated M3Dry bidirectional deposition model, and the new Surface Tiled Aerosol and Gaseous Exchange (STAGE) bidirectional deposition model. In addition, support for the Weather Research and Forecasting (WRF) model's hybrid vertical coordinate (HVC) was added to CMAQ53 and the Meteorology-Chemistry Interface Processor (MCIP) version 5.0 (MCIP50). Enhanced functionality in CMAQ53 includes the new Detailed Emissions Scaling, Isolation and Diagnostic (DESID) system for scaling incoming emissions to CMAQ and reading multiple gridded input emission files. Evaluation of CMAQ531 was performed by comparing monthly and seasonal mean daily 8 h average (MDA8) O 3 and daily PM 2.5 values from several CMAQ531 simulations to a similarly configured CMAQ521 simulation encompassing 2016. For MDA8 O 3 , CMAQ531 has higher O 3 in the winter versus CMAQ521, due primarily to reduced dry deposition to snow, which strongly reduces wintertime O 3 bias (2–4 ppbv monthly average). MDA8 O 3 is lower with CMAQ531 throughout the rest of the year, particularly in spring, due in part to reduced O 3 from the lateral boundary conditions (BCs), which generally increases MDA8 O 3 bias in spring and fall (∼0.5 µgm-3). For daily 24 h average PM 2.5 , CMAQ531 has lower concentrations on average in spring and fall, higher concentrations in summer, and similar concentrations in winter to CMAQ521, which slightly increases bias in spring and fall and reduces bias in summer. Comparisons were also performed to isolate updates to several specific aspects of the modeling system, namely the lateral BCs, meteorology model version, and the deposition model used. Transitioning from a hemispheric CMAQ (HCMAQ) version 5.2.1 simulation to a HCMAQ version 5.3 simulation to provide lateral BCs contributes to higher O 3 mixing ratios in the regional CMAQ simulation in higher latitudes during winter (due to the decreased O 3 dry deposition to snow in CMAQ53) and lower O 3 mixing ratios in middle and lower latitudes year-round (due to reduced O 3 over the ocean with CMAQ53). Transitioning from WRF version 3.8 to WRF version 4.1.1 with the HVC resulted in consistently higher (1.0–1.5 ppbv) MDA8 O 3 mixing ratios and higher PM 2.5 concentrations (0.1–0.25 µgm-3) throughout the year. Finally, comparisons of the M3Dry and STAGE deposition models showed that MDA8 O 3 is generally higher with M3Dry outside of summer, while PM 2.5 is consistently higher with STAGE due to differences in the assumptions of particle deposition velocities to non-vegetated surfaces and land use with short vegetation (e.g., grasslands) between the two models. For ambient NH 3 , STAGE has slightly higher concentrations and smaller bias in the winter, spring, and fall, while M3Dry has higher concentrations and smaller bias but larger error and lower correlation in the summer. [ABSTRACT FROM AUTHOR]

The Community Multiscale Air Quality (CMAQ) model version 5.3 (CMAQ53), released to the public in August 2019 and followed by version 5.3.1 (CMAQ531) in December 2019, contains numerous science updates, enhanced functionality, and improved computation efficiency relative to the previous version of the model, 5.2.1 (CMAQ521). Major science advances in the new model include a new aerosol module (AERO7) with significant updates to secondary organic aerosol (SOA) chemistry; updated chlorine chemistry; updated detailed bromine/iodine chemistry; updated simple halogen chemistry; addition of dimethyl sulfide (DMS) chemistry in the CB6r3 chemical mechanism; updated M3Dry bi-directional deposition model; and the new Surface Tiled Aerosol and Gaseous Exchange (STAGE) bi-directional deposition model. In addition, support for the Weather Research and Forecasting (WRF) model's hybrid vertical coordinate (HVC) system was added to CMAQ53 and the Meteorology-Chemistry Interface Processor (MCIP) version 5.0 (MCIP50). Enhanced functionality in CMAQ53 includes the new Detailed Emissions Scaling, Isolation and Diagnostic (DESID) system for scaling incoming emissions to CMAQ and reading multiple gridded input emission files. Evaluation of CMAQ53 was performed by comparing monthly and seasonal mean daily 8-hr average (MDA8) O3 and PM2.5 values from several CMAQ531 simulations to a similarly configured CMAQ521 simulation encompassing 2016. For MDA8 O3, CMAQ531 has higher O3 in the winter versus CMAQ521, due primarily to reduced dry deposition to snow, which strongly reduces wintertime O3 bias. MDA8 O3 is lower with CMAQ531 throughout the rest of the year, particularly in spring, due in part to reduced O3 from the lateral boundary conditions (BCs), which generally increases MDA8 O3 bias in spring and fall. For daily 24-hr average PM2.5, CMAQ531 has lower concentrations on average in spring and fall, higher concentrations in summer, and similar concentrations in winter as CMAQ521, which slightly increases bias in spring and fall and reduces bias in summer. Comparisons isolating updates to several specific aspects of the modeling system, namely the lateral BCs, meteorology model version, and the deposition model used, were also performed. Transitioning from a hemispheric CMAQ (HCMAQ) version 5.2.1 simulation to a HCMAQ version 5.3 simulation to provide lateral BCs contributes to higher O3 mixing ratios in the regional CMAQ simulation in higher latitudes during winter (due to the decreased O3 dry deposition to snow in CMAQ53) and lower O3 mixing ratios in mid and lower latitudes year-round (due to reduced O3 over the ocean with CMAQ53). Transitioning from WRF version 3.8 to WRF version 4.1.1 with the HVC system resulted in consistently higher (1.0-1.5 ppbv) MDA8 O3 mixing ratios and higher PM2.5 concentrations (0.1-0.25 µg m-3) throughout the year. Finally, comparisons of the M3Dry and STAGE deposition models showed that MDA8 O3 is generally higher with M3Dry outside of summer, while PM2.5 is consistently higher with STAGE due to differences in the assumptions of particle deposition velocities to some surfaces between the two models. For ambient NH3, STAGE has slightly higher concentrations and smaller bias in the winter, spring, and fall, while M3Dry has higher concentrations and smaller bias, but larger error and lower correlation, in the summer. [ABSTRACT FROM AUTHOR]

The Community Multiscale Air Quality (CMAQ) model is a comprehensive multipollutant air quality modeling system developed and maintained by the US Environmental Protection Agency's (EPA) Office of Research and Development (ORD). Recently, version 5.1 of the CMAQ model (v5.1) was released to the public, incorporating a large number of science updates and extended capabilities over the previous release version of the model (v5.0.2). These updates include the following: improvements in the meteorological calculations in both CMAQ and the Weather Research and Forecast (WRF) model used to provide meteorological fields to CMAQ, updates to the gas and aerosol chemistry, revisions to the calculations of clouds and photolysis, and improvements to the dry and wet deposition in the model. Sensitivity simulations isolating several of the major updates to the modeling system show that changes to the meteorological calculations result in enhanced afternoon and early evening mixing in the model, periods when the model historically underestimates mixing. This enhanced mixing results in higher ozone (O3) mixing ratios on average due to reduced NO titration, and lower fine particulate matter (PM2.5) concentrations due to greater dilution of primary pollutants (e.g., elemental and organic carbon). Updates to the clouds and photolysis calculations greatly improve consistency between the WRF and CMAQ models and result in generally higher O3 mixing ratios, primarily due to reduced cloudiness and attenuation of photolysis in the model. Updates to the aerosol chemistry result in higher secondary organic aerosol (SOA) concentrations in the summer, thereby reducing summertime PM2.5 bias (PM2.5 is typically underestimated by CMAQ in the summer), while updates to the gas chemistry result in slightly higher O3 and PM2.5 on average in January and July. Overall, the seasonal variation in simulated PM2.5 generally improves in CMAQv5.1 (when considering all model updates), as simulated PM2.5 concentrations decrease in the winter (when PM2.5 is generally overestimated by CMAQ) and increase in the summer (when PM2.5 is generally underestimated by CMAQ). Ozone mixing ratios are higher on average with v5.1 vs. v5.0.2, resulting in higher O3 mean bias, as O3 tends to be overestimated by CMAQ throughout most of the year (especially at locations where the observed O3 is low); however, O3 correlation is largely improved with v5.1. Sensitivity simulations for several hypothetical emission reduction scenarios show that v5.1 tends to be slightly more responsive to reductions in NOx (NO+NO2), VOC and SOx (SO2 + SO4) emissions than v5.0.2, representing an improvement as previous studies have shown CMAQ to underestimate the observed reduction in O3 due to large, widespread reductions in observed emissions. [ABSTRACT FROM AUTHOR]

The Community Multiscale Air Quality (CMAQ) model is a comprehensive multi-pollutant air quality modeling system developed and maintained by the U.S. Environmental Protection Agency's (EPA) Office of Research and Development (ORD). Recently, version 5.1 of the CMAQ model (v5.1) was released to the public which incorporates a large number of science updates and extended capabilities over the previous release version of the model (v5.0.2). These updates include improvements in the meteorological calculations in both CMAQ and the Weather Research and Forecast (WRF) model used to provide meteorological fields to CMAQ; updates to the gas and aerosol chemistry; revisions to the calculations of clouds and photolysis; and improvements to the dry and wet deposition in the model. Sensitivity simulations isolating several of the major updates to the modeling system show that changes to the meteorological calculations generally result in greater afternoon and early evening mixing in the model, times when the model historically underestimates mixing. The result is higher ozone (O3) mixing ratios on average due to reduced NO titration and lower fine particulate matter (PM2.5) concentrations due to greater dilution of primary pollutants (e.g. elemental and organic carbon). Updates to the clouds and photolysis calculations greatly improve consistency between the WRF and CMAQ models and result in generally higher O3 mixing ratios, primarily due to reduced cloudiness and reduced attenuation of photolysis in the model. Updates to the aerosol chemistry results in higher secondary organic aerosol (SOA) concentrations in the summer, thereby reducing PM2.5 bias, while updates to the gas chemistry result in generally increased O3 in January and July (small) and slightly higher PM2.5 concentrations on average in both January and July. Overall, seasonal variation in simulated PM2.5 generally improves in the new model version, as concentrations decrease in the winter (when PM2.5 is overestimated by CMAQ v5.0.2) and increase in the summer (when PM2.5 is underestimated by CMAQ v5.0.2). Ozone mixing ratios are higher on average with v5.1 versus v5.0.2, resulting in higher O3 mean bias, as O3 tends to be overestimated by CMAQ throughout most of the year (especially at locations where the observed O3 is low), however both the error and correlation are largely improved with v5.1. Sensitivity simulations for several hypothetical emission reduction scenarios showed that v5.1 tends to be slightly more responsive to reductions in NOx (NO + NO2), VOC and SOx (SO2 + SO4) emissions than v5.0.2, representing an improvement as previous studies have shown CMAQ to underestimate the observed reduction in O3 due to large, widespread reductions in observed emissions. Finally, the computational efficiency of the model was significantly improved in v5.1, which keeps runtimes similar to v5.0.2 despite the added complexity to the model. [ABSTRACT FROM AUTHOR]