Search

High entropy alloy HfNbTaTiZr in as cast conditions and after high pressure torsion straining was characterized by nanoindentation. The length-scale dependent material response (indentation size effect) was characterized by indentation at various indentation depths. Hardness dependence on the characteristic length (depth of penetration) indicated decomposition of disordered high entropy alloy in the as cast sample, which probably occurred during slow cooling after casting. Subsequent severe plastic deformation by high pressure torsion led on the other hand to the short-range disorder of (originally partially decomposed as cast) structure. Further hardening was generated during high pressure torsion by the mechanisms of grain refinement and increasing dislocation density. [ABSTRACT FROM AUTHOR]

Flow curves of 15Kh2MFA, Sv 08Kh19N10G2B and 08Kh18N10T steels used for fabrication of WWER-440 nuclear reactor pressure vessel and core internals were obtained using the automated ball indentation (ABI) test technique and compared with flow curves evaluated from the same measured load-displacement data and widely used Oliver-Pharr method. Differences in results obtained by both studied methods do not exceed 12% and are attributed to the amount of material pile-up. [ABSTRACT FROM AUTHOR]

The study is devoted to the intermetallic alloy FeAl20Si20 (wt.%) with the potential applications in high temperature aggressive environments. The samples of the same chemical composition were prepared by spark plasma sintering from the different mechanically alloyed powders (pure elements and pre-alloyed powders). Differences in mechanical properties were characterized. Whereas no significant differences were found in hardness and Young's modulus, fracture resistance was higher for the samples from pre-alloyed powders in which Palmqvist and lateral cracks were observed (contrary to the sample made of pure elements where only Palmqvist cracks were identified). [ABSTRACT FROM AUTHOR]