Search

Western Europe area is one of the world regions where traditionally flax is grown. Whether in France or Belgium, flax is mainly used for the production of fabrics. When separating the different components of the plant, small woody elements called shives which represented about 50% of the production, are recovered. This work aims to study the behavior of flax shives used as insulation material in an attic of a French Flanders traditional house. Main scientific issues related to the study of heat and mass transfer is to determine the evolution of the thermal characteristics of the material and its durability. First, we propose a laboratory analysis of the hygrothermal behavior of shives by conventional thermal methods for characterizing thermal conductivity and volumetric heat (heat flux method), sorption curve is also determined. Then we focus on an experimental site which is an independent house where the old insulation of the attic in glass wool was replaced by flax shives. The hygrothermal behavior of this new insulation was monitored with humidity and temperature sensors for ten months. The thermal performances determined for a raw form of the shives in the laboratory are encouraging and hygrometric results show advantageous behavior whatever the season.

This study presents a NDT method using infrared thermography associated with a microwave excitation. The advantages of such stimulation lie in the volumic absorption of incoming waves which lead to a greater sounded depth. This method is applied to two types of samples. The first is a concrete slab reinforced with CFRP on which a bonding failure is inserted and the second is a wooden plate on which a metallic insert is placed on the back face. The device generating the microwaves is made of a commercial magnetron associated with a pyramidal horn antenna. An infrared camera is placed on the same side as the stimulated surface and thermograms are recorded at regular intervals. The whole assembly is placed in a protective room against high frequencies. The incident power density leads to heating of less than 1 °C of the surface of the samples. The thermograms show a higher temperature rise in front of the defect area. The non-uniformity of the beam, leads us to treat the thermograms with an algorithm of contrast. These first results show the interest of the microwave excitation to detect defects deeper than in the case of surface excitation. [ABSTRACT FROM AUTHOR]