Search

Background: Reverse shoulder arthroplasty is becoming an increasingly common surgical procedure in Hong Kong, as well as in many other countries worldwide. The aim of this study is to describe the glenoid anatomy in the Southern Chinese population. We are interested to know whether commercially available glenoid implants are suitable for this population and whether there are any steps or precautions we can take during surgery to optimize the clinical outcome for these patients., Method: A total of 244 shoulders of Southern Chinese patients were analyzed using 2-dimensional computed tomography, formatted to align along the scapular axis. The anatomic parameters analyzed included the shape, axial configuration, maximum width, maximum height, version, and presence of bone defect., Results: In our study, 76.6% of glenoids were pear-shaped, 23.0% were elliptical, and only 0.4% were inverted pear in shape. Of all glenoids, 95.1% of glenoids had posterior-prominent axial configuration, whereas 4.9% had neutral axial configuration. The mean maximum glenoid height for both genders was 33.8 mm, whereas the mean maximum glenoid height was 32.2 mm for women and 36.6 mm for men. The mean maximum glenoid width for both genders was 25.8 mm, whereas the mean maximum glenoid width was 24.8 mm for women and 27.3 mm for men. The differences in measurements between genders were statistically significant. Of all glenoids, 46.3% of the glenoids were retroverted, whereas 53.7% of the glenoids were anteverted. The mean version for both genders was 0.77 degrees anteversion. The mean version was 1.16 degrees anteversion for women and 0.10 degrees anteversion for men. Of the 244 glenoids, 4 had bone defects. In our study, 39.8% of patients had mean maximum glenoid widths that were less than 25 mm, which is the smallest size available for most conventional glenoid baseplates., Conclusion: A significant portion of the Southern Chinese population has glenoid widths that are smaller than the smallest commercially available glenoid baseplates. Understanding the glenoid anatomy is crucial in the case of reverse shoulder arthroplasty, as it has significant implications in implant design, operative planning, and surgical outcomes., (© 2021 The Authors.)

Purpose: Conventional radiation fractionation of 1.8-2 Gy per day for early stage breast cancer requires daily treatment for 6-7 weeks. We report the 5-year results of a phase II study of intensity modulated radiation therapy (IMRT), hypofractionation, and incorporated boost that shortened treatment time to 4 weeks., Methods and Materials: The study design was phase II with a planned accrual of 75 patients. Eligibility included patients aged≥18 years, Tis-T2, stage 0-II, and breast conservation. Photon IMRT and an incorporated boost was used, and the whole breast received 2.25 Gy per fraction for a total of 45 Gy, and the tumor bed received 2.8 Gy per fraction for a total of 56 Gy in 20 treatments over 4 weeks. Patients were followed every 6 months for 5 years., Results: Seventy-five patients were treated from December 2003 to November 2005. The median follow-up was 69 months. Median age was 52 years (range, 31-81). Median tumor size was 1.4 cm (range, 0.1-3.5). Eighty percent of tumors were node negative; 93% of patients had negative margins, and 7% of patients had close (>0 and <2 mm) margins; 76% of cancers were invasive ductal type: 15% were ductal carcinoma in situ, 5% were lobular, and 4% were other histology types. Twenty-nine percent of patients 29% had grade 3 carcinoma, and 20% of patients had extensive in situ carcinoma; 11% of patients received chemotherapy, 36% received endocrine therapy, 33% received both, and 20% received neither. There were 3 instances of local recurrence for a 5-year actuarial rate of 2.7%., Conclusions: This 4-week course of hypofractionated radiation with incorporated boost was associated with excellent local control, comparable to historical results of 6-7 weeks of conventional whole-breast fractionation with sequential boost., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Purpose: Magnetic resonance stereoscopic imaging (MRSI) of the prostate is an emerging technique that may enhance targeting and assessment in radiotherapy. Current practices in radiotherapy invariably involve image guidance. Gold seed fiducial markers are often used to perform daily prostate localization. If MRSI is to be used in targeting prostate cancer and therapy assessment, the impact of gold seeds on MRSI must be investigated. The purpose of this study was to quantify the effects of gold seeds on the quality of MRSI data acquired in phantom experiments., Methods and Materials: A cylindrical plastic phantom with a spherical cavity 10 centimeters in diameter wss filled with water solution containing choline, creatine, and citrate. A gold seed fiducial marker was put near the center of the phantom mounted on a plastic stem. Spectra were acquired at 1.5 Tesla by use of a clinical MRSI sequence. The ratios of choline + creatine to citrate (CC/Ci) were compared in the presence and absence of gold seeds. Spectra in the vicinity of the gold seed were analyzed., Results: The maximum coefficient of variation of CC/Ci induced by the gold seed was found to be 10% in phantom experiments at 1.5 T., Conclusion: MRSI can be used in prostate radiotherapy in the presence of gold seed markers. Gold seeds cause small effects (in the order of the standard deviation) on the ratio of the metabolite's CC/Ci in the phantom study done on a 1.5-T scanner. It is expected that gold seed markers will have similar negligible effect on spectra from prostate patients. The maximum of 10% of variation in CC/Ci found in the phantom study also sets a limit on the threshold accuracy of CC/Ci values for deciding whether the tissue characterized by a local spectrum is considered malignant and whether it is a candidate for local boost in radiotherapy dose., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Purpose: To study the gains from real-time tracking of prostate motion and threshold-based intervention and the feasibility of margin reduction for external beam radiation therapy of prostate cancer., Methods and Materials: Prostate intrafractional motion data from 775 randomly selected treatment fractions (105 prostate patients) were analyzed. Statistical distributions of prostate intrafractional displacement from baseline were used for treatment margin calculation together with other geometrical uncertainties for all patients and a subset of 7 patient who exhibited the largest intrafractional motion. Compared with treatment without any intrafractional intervention, potential reductions in treatment margins were evaluated for treatments with 5-mm and 3-mm threshold-based intervention and four-dimensional (4D) treatments with and without prostate rotation correction., Results: The percentage of time of prostate displacement from the baseline by 3 mm and 5 mm in any direction was 13.4% and 1.8%, respectively, for the general patient population. The ratios were 41% and 15% for the 7 selected patients. Reductions in the posterior margin were 0.2, 0.5, 1.3, and 3.1 mm from the original 7.7 mm, respectively, for 5-mm and 3-mm threshold-based treatments and 4D treatments with and without prostate rotation correction for all patients. They were 1.3, 1.9, 3.1 and 4.9 mm from the original 9.5 mm, corresponding to the 7 selected patients. The treatment margin reductions in other directions were even smaller., Conclusions: Real-time motion tracking and threshold-based intrafractional intervention may play a significant roll in treatment margin reduction for a small fraction of patients but not for the general patient population. Four-dimensional treatments with prostate rotation correction can reduce the treatment margin more significantly.

Purpose: To develop a technique to create magnetic resonance (MR)-based digitally reconstructed radiographs (DRR) for initial patient setup for routine clinical applications of MR-based treatment planning for prostate intensity-modulated radiotherapy., Methods and Materials: Twenty prostate cancer patients' computed tomography (CT) and MR images were used for the study. Computed tomography and MR images were fused. The pelvic bony structures, including femoral heads, pubic rami, ischium, and ischial tuberosity, that are relevant for routine clinical patient setup were manually contoured on axial MR images. The contoured bony structures were then assigned a bulk density of 2.0 g/cm(3). The MR-based DRRs were generated. The accuracy of the MR-based DDRs was quantitatively evaluated by comparing MR-based DRRs with CT-based DRRs for these patients. For each patient, eight measuring points on both coronal and sagittal DRRs were used for quantitative evaluation., Results: The maximum difference in the mean values of these measurement points was 1.3 +/- 1.6 mm, and the maximum difference in absolute positions was within 3 mm for the 20 patients investigated., Conclusions: Magnetic resonance-based DRRs are comparable to CT-based DRRs for prostate intensity-modulated radiotherapy and can be used for patient treatment setup when MR-based treatment planning is applied clinically.

Purpose: Standard radiation for early breast cancer requires daily treatment for 6 to 7 weeks. This is an inconvenience to many women, and for some a barrier for breast conservation. We present the acute toxicity of a 4-week course of hypofractionated radiation., Methods and Materials: A total of 75 patients completed radiation on a Phase II trial approved by the hospital institutional review board. Eligibility criteria were broad to include any patient normally eligible for standard radiation: age >or=18 years, invasive or in situ cancer, American Joint Committee on Cancer Stage 0 to II, breast-conserving surgery, and any systemic therapy not given concurrently. The median age was 52 years (range, 31-81 years). Of the patients, 15% had ductal carcinoma in situ, 67% T1, and 19% T2; 71% were N0, 17% N1, and 12% NX. Chemotherapy was given before radiation in 44%. Using photon intensity-modulated radiation therapy and incorporated electron beam boost, the whole breast received 45 Gy and the lumpectomy bed 56 Gy in 20 treatments over 4 weeks., Results: The maximum acute skin toxicity by the end of treatment was Grade 0 in 9 patients (12%), Grade 1 in 49 (65%) and Grade 2 in 17 (23%). There was no Grade 3 or higher skin toxicity. After radiation, all Grade 2 toxicity had resolved by 6 weeks. Hematologic toxicity was Grade 0 in most patients except for Grade 1 neutropenia in 2 patients, and Grade 1 anemia in 11 patients. There were no significant differences in baseline vs. 6-week posttreatment patient-reported or physician-reported cosmetic scores., Conclusions: This 4-week course of postoperative radiation using intensity-modulated radiation therapy is feasible and is associated with acceptable acute skin toxicity and quality of life. Long-term follow-up data are needed. This radiation schedule may represent an alternative both to longer 6-week to 7-week standard whole-breast radiation and more radically shortened 1-week, partial-breast treatment schedules.

Purpose: The aim of this study was to evaluate the feasibility of treating the pelvic lymphatic regions during prostate intensity-modulated radiotherapy (IMRT) with respect to our routine acceptance criteria., Methods and Materials: A series of 10 previously treated prostate patients were randomly selected and the pelvic lymphatic regions delineated on the fused magnetic resonance/computed tomography data sets. A targeting progression was formed from the prostate and proximal seminal vesicles only to the inclusion of all pelvic lymphatic regions and presacral region resulting in 5 planning scenarios of increasing geometric difficulty. IMRT plans were generated for each stage for two accelerator manufacturers. Dose volume histogram data were analyzed with respect to dose to the planning target volumes, rectum, bladder, bowel, and normal tissue. Analysis was performed for the number of segments required, monitor units, "hot spots," and treatment time., Results: Both rectal endpoints were met for all targets. Bladder endpoints were not met and the bowel endpoint was met in 40% of cases with the inclusion of the extended and presacral lymphatics. A significant difference was found in the number of segments and monitor units with targeting progression and between accelerators, with the smaller beamlets yielding poorer results. Treatment times between the 2 linacs did not exhibit a clinically significant difference when compared., Conclusions: Many issues should be considered with pelvic lymphatic irradiation during IMRT delivery for prostate cancer including dose per fraction, normal structure dose/volume limits, planning target volumes generation, localization, treatment time, and increased radiation leakage. We would suggest that, at a minimum, the endpoints used in this work be evaluated before beginning IMRT pelvic nodal irradiation.

Purpose: The alpha/beta ratio for prostate cancer is postulated to be between 1 and 3, giving rise to the hypothesis that there may be a therapeutic advantage to hypofractionation. The dosimetry and acute toxicity are described in the first 100 men enrolled in a randomized trial., Patients and Methods: The trial compares 76 Gy in 38 fractions (Arm I) to 70.2 Gy in 26 fractions (Arm II) using intensity modulated radiotherapy. The planning target volume (PTV) margins in Arms I and II were 5 mm and 3 mm posteriorly and 8 mm and 7 mm in all other dimensions. The PTV D95% was at least the prescription dose., Results: The mean PTV doses for Arms I and II were 81.1 and 73.8 Gy. There were no differences in overall maximum acute gastrointestinal (GI) or genitourinary (GU) toxicity acutely. However, there was a slight but significant increase in Arm II GI toxicity during Weeks 2, 3, and 4. In multivariate analyses, only the combined rectal DVH parameter of V65 Gy/V50 Gy was significant for GI toxicity and the bladder volume for GU toxicity., Conclusion: Hypofractionation at 2.7 Gy per fraction to 70.2 Gy was well tolerated acutely using the planning conditions described.

Purpose: Magnetic resonance (MR) and computed tomography (CT) image fusion with CT-based dose calculation is the gold standard for prostate treatment planning. MR and CT fusion with CT-based dose calculation has become a routine procedure for intensity-modulated radiation therapy (IMRT) treatment planning at Fox Chase Cancer Center. The use of MRI alone for treatment planning (or MRI simulation) will remove any errors associated with image fusion. Furthermore, it will reduce treatment cost by avoiding redundant CT scans and save patient, staff, and machine time. The purpose of this study is to investigate the dosimetric accuracy of MRI-based treatment planning for prostate IMRT., Methods and Materials: A total of 30 IMRT plans for 15 patients were generated using both MRI and CT data. The MRI distortion was corrected using gradient distortion correction (GDC) software provided by the vendor (Philips Medical System, Cleveland, OH). The same internal contours were used for the paired plans. The external contours were drawn separately between CT-based and MR imaging-based plans to evaluate the effect of any residual distortions on dosimetric accuracy. The same energy, beam angles, dose constrains, and optimization parameters were used for dose calculations for each paired plans using a treatment optimization system. The resulting plans were compared in terms of isodose distributions and dose-volume histograms (DVHs). Hybrid phantom plans were generated for both the CT-based plans and the MR-based plans using the same leaf sequences and associated monitor units (MU). The physical phantom was then irradiated using the same leaf sequences to verify the dosimetry accuracy of the treatment plans., Results: Our results show that dose distributions between CT-based and MRI-based plans were equally acceptable based on our clinical criteria. The absolute dose agreement for the planning target volume was within 2% between CT-based and MR-based plans and 3% between measured dose and dose predicted by the planning system in the physical phantom., Conclusions: Magnetic resonance imaging is a useful tool for radiotherapy simulation. Compared with CT-based treatment planning, MR imaging-based treatment planning meets the accuracy for dose calculation and provides consistent treatment plans for prostate IMRT. Because MR imaging-based digitally reconstructed radiographs do not provide adequate bony structure information, a technique is suggested for producing a wire-frame image that is intended to replace the traditional digitally reconstructed radiographs that are made from CT information.

Purpose: The objectives of this work are: (1) to determine typical dose to the lens during step-and-shoot intensity modulated radiotherapy (IMRT) treatments of the head and neck, and (2) to report on the dose calculation accuracy of a commercial inverse planning system in predicting lens dose., Methods and Materials: The Corvus inverse treatment planning system (Nomos, Cranberry Township, PA) was used to plan IMRT treatments for patients with head-and-neck cancers in our clinic. Patients were treated on Varian C-series linacs (Varian, Palo Alto, CA) with 4-MV or 6-MV X-rays. A Rando phantom (Alderson Laboratories, Stamford, CT) was specially modified to accommodate 1 x 1 x 1 mm(3) thermoluminescent dosimeters at the position of the lens. The IMRT treatment plans were then delivered to the modified Rando phantom. The thermoluminescent dosimeter measurements were converted to dose and taken as an estimate of the lens dose. A total of 20 cases were used in this study (15 cases with 4 MV and 5 cases with 6 MV)., Results: Expressed as a percentage of the prescription dose, the mean dose to the left and right lens for all 4-MV cases was 9.1% (range, 2.0% to 61.3%). For the 6-MV cases, the mean dose to the left and right lens was 12.8% (range, 3.6% to 41.3%). For both the 4-MV and 6-MV cases, the case of maximum dose occurred when the IMRT treatment target included volumes superior to the level of the lens. The field size and number of monitor units did not correlate with the measured lens dose. The only factor of significance affecting lens dose was the inferior-to-superior distance of the target to the lens. For target-lens distance >/=6 mm, the maximum measured lens doses were 5.9% and 9.0% relative to the prescribed dose for the 4-MV and 6-MV beams, respectively. These data are similar to those observed in conventional head-and-neck treatments. For all cases, the difference between the dose measured and that predicted by Corvus was less than 2% and 4% of the dose prescribed to the gross tumor volume for the 4-MV and 6-MV cases, respectively., Conclusion: In IMRT, factors such as leaf leakage and number of monitor units play a secondary role and are not more significant than what is observed in conventional head-and-neck treatment when the lens is shielded by the collimator jaws. The target-lens distance is the parameter that affects the lens dose most strongly. For cases where the tumor is at or above the level of the lens, the lens dose can amount to an appreciable fraction of the prescription dose. To keep the lens dose to a minimum, noncoplanar beams that enter or exit into the lens should not be used.

Purpose: The focus of this work is to develop a practical planning method that results in increased dose conformity and reduced treatment time for segmental multileaf collimation (sMLC) based intensity-modulated radiation therapy (IMRT) delivery., Methods and Materials: Additional regions for dose constraint are introduced within the normal tissue during the planning process by designing a series of concentric ellipsoids around the target. A dose gradient is then defined by assigning dose constraints to each concentric region. The technique was tested at two centers and data for 26 and 10 patients, respectively, are presented allowing for differences in treatment technique, beam energy, ellipsoid definition, and prescription dose. At both centers, a series of patients previously treated for prostate cancer with IMRT were selected, and comparisons were made between the original and new plans., Results: While meeting target dose specifications and normal tissue constraints, the average number of beam directions decreased by 1.6 with a standard error (SE) of 0.1. The average time for delivery at center 1 decreased by 29.0% with an SE of 2.0%, decreasing from 17.5 min to 12.3 min. The average time for delivery at center 2 decreased by 29.9% with an SE of 3.8%, decreasing from 11 min to 7.7 min. The amount of nontarget tissue receiving D(100) decreased by 15.7% with an SE of 2.4%. Nontarget tissue receiving D(95), D(90), and D(50) decreased by 16.3, 15.1, and 19.5%, respectively, with SE values of approximately 2% at center 1. Corresponding values for D(100), D(95), D(90), and D(50) decreased by 13.5, 16.7, 17.1, and 5.1%, respectively, with SE values of less than 3% at center 2., Conclusion: By designating subsets of tissue as concentric regions around the target(s) and carefully defining each region's dose constraints, we have gained an increased measure of control over the region outside the target boundaries. This increased control manifests as two distinct endpoints that are beneficial to the IMRT process: increased dose conformity and decreased treatment time.

Purpose: Leaf motion synchronization of dynamic multileaf collimators (DMLC) for intensity-modulated radiotherapy (IMRT) is important in improving dose distribution and reducing "tongue-and-groove" effects for a prescribed intensity profile. Leaf synchronization could also be used in transforming a one-dimensional leaf-setting algorithm into a two-dimensional leaf-setting algorithm. In this work, we aim to develop a generalized leaf synchronization method for delivering IMRT with the minimized beam delivery time and the optimized subfield variations for a leaf-setting sequence., Methods and Materials: With the leaf synchronization procedure, all active MLC leaf pairs start and finish off a leaf sequence simultaneously. In this work, the MLC leaf pairs were synchronized under the condition that the resulting leaf sequence produces the desired intensity profile with the minimum beam delivery time. The parameter of the leaf synchronization function was determined through the least-square minimization of the area variations of all subfields within a leaf sequence. The leaf synchronization and optimization procedure were applied and analyzed for clinical relevant intensity profiles for treating the head-and-neck cancer patients using IMRT., Results: The total monitor units and the optimized beam delivery time of generating a two-dimensional intensity profile was proven through this work to be the global minimum of all leaf-setting sequences including the unsynchronized leaf-setting sequences. The optimized parameter for subfield variations of the synchronized leaf trajectories was found to be dependent on individual intensity profiles. For all our studied cases, the unsynchronized leaf trajectories always have significantly larger subfield variations than the synchronized leaf trajectories., Conclusion: It is important and also feasible to synchronize and optimize dynamic MLC leaf motions while still keeping the total beam delivery time minimum for delivering arbitrary two-dimensional intensity-modulated fields.