Search

Bio-based fertilizers (BBFs) produced from organic waste contribute to closed-loop nutrient cycles and circular agriculture. However, persistent organic contaminants, such as per- and poly-fluoroalkyl substances (PFAS), polychlorobiphenyls (PCBs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), as well as polyaromatic hydrocarbons (PAHs) can be present in organic waste or be formed during valorization processes. Consequently, these hazardous substances may be introduced into agricultural soils and the food chain via BBFs. This study assessed the exposure of 84 target substances and extractable organic fluorine (EOF) in 19 BBFs produced from different types of waste, including agricultural and food industrial waste, sewage sludge, and biowaste, and through various types of valorization methods, including hygienization at low temperatures (<150 °C) as well as pyrolysis and incineration at elevated temperatures (150-900 °C). The concentrations in BBFs (ΣPFOS & PFOA: <30 μg kg -1 , Σ6PCBs: <15 μg kg -1 , Σ11PAHs: <3 mg kg -1 , Σ17PCDD/Fs: <4 ng TEQ kg -1 ) were found to be below the strictest thresholds used in individual EU countries, with only one exception (pyrolyzed sewage sludge, Σ11PAHs: 5.9 mg kg -1 ). Five BBFs produced from sewage sludge or chicken manure contained high concentrations of EOF (>140 μg kg -1 ), so monitoring of more PFAS is recommended. The calculated expected concentrations in soils after one BBF application (e.g. PFOS: <0.05 μg kg -1 ) fell below background contamination levels (PFOS: 2.7 μg kg -1 ) elsewhere in the literature. This was confirmed by the analysis of BBF-amended soils from field experiments (Finland and Austria). Studies on target legacy contaminants in sewage sludge were reviewed, indicating a general decreasing trend in concentration with an apparent half-life ranging from 4 (PFOS) to 9 (PCDD/Fs) years. Modelled cumulative concentrations of the target contaminants in agricultural soils indicated low long-term risks. Concentrations estimated and analyzed in edible plant part were low, indicating that exposure by plant consumption is well below tolerable daily intakes., (Copyright © 2024. Published by Elsevier B.V.)

In an effort to support European Union Water Framework Directive goals, we have set up a national demonstrator project to identify the advantages and limitations of passive samplers for regulatory monitoring of polar contaminants in surface waters. Here we carried out successive 14 day-deployments of polar organic chemical integrative samplers (POCIS) for one year at three sites. In parallel, we used the passive sampler deployment/retrieval operations to collect spot water samples for comparative analysis. We observed that frequency of quantification was significantly higher in POCIS than spot samples for 29 contaminants, similar for 15, and lower for one, because POCIS lowered the limits of quantification for most contaminants (median value factor of 11). We built a database of sampling rates (Rs) according to quality indices to convert concentrations in POCIS to concentrations in water (23 contaminants with a high-quality median Rs value, 20 with an approximate Rs and two with no usable Rs). Several phenomena were observed over one-year monitoring period. For example, after a flood episode, dilution phenomenon in rivers is correctly observed by using POCIS sampling whereas significant concentration increased due to soil leaching is observed with both passive and spot sampling. Cases of episodic contamination that were missed by spot sampling were observed with POCIS as it was able to capture contamination of short duration but sufficient intensity. Contamination by pharmaceuticals was found to come from wastewater treatment plant discharges and showed relatively little variation over the course of the year in both POCIS and spot samples. POCIS enables more reliable annual monitoring of pesticide and pharmaceutical contamination than spot sampling. Furthermore, POCIS also improves the environmental quality standards based assessment of chemical status and on annual average concentrations compared to spot sampling. This study demonstrates the value and practicability of POCIS-based chemical monitoring for use in regulatory control networks., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier B.V.)

Passive sampling has been shown to be a suitable procedure to assess the risk of contaminated sediments through the measurement of freely dissolved concentrations (C Free ) and remedial actions involving amendments such as activated carbon (AC). Here we report results of the application of simple, solvent-free solid phase micro extraction methodology (SPME) to assess the performance of different materials for the remediation of selected Norwegian harbour sediments contaminated with polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). AC amendments enabled a reduction of the availability of PAHs and/or PCBs by a factor of ten to over one hundred in Aker Brygge sediments (Oslo) and sediments from Elkembukta, impacted by industrial emissions of PAHs with/from coal tar pitch. Another material, anthracite, slightly less effective in this set of experiment than AC, showed nonetheless great promise as capping material. The SPME data are put in perspective with equilibrium measurements of C Free for PAHs and organochlorines with silicone rubber in other Elkembukta sediments collected in the vicinity of those used for the remediation experiments. A reduction of sediment C free for pyrene, benzo[a]pyrene and benzo[ghi]perylene in inner Elkembukta sediment from on average 407, 6.3 and 0.82 ng L -1 to values of/or below 1.3, 0.15 and 0.076 ng L -1 , respectively can be expected upon remediation with AC. For the outer, less contaminated Elkembukta sediment, Cfree would reduce from 36, 0.81 and 0.13 ng L -1 to value of or below 0.06, 0.03 and 0.005 ng L -1 for these three compounds, respectively. Differences in pattern of PAH and organochlorine contamination of inner and outer Elkembukta sediments are discussed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Author(s). Published by Elsevier B.V. All rights reserved.)

Contaminant bioaccumulation was studied in blue mussels (Mytilus edulis spp.) using the harbor waters of Kristiansand (Norway) as a case study. A suite of chemical contaminants (trace metals, PAHs and PCBs) was analyzed in caged and native mussels as well as in passive samplers (Diffusive Gradients in Thin films (DGT)-devices and silicone rubbers) placed alongside the mussels for estimation of contaminant concentrations in water and uptake rates and bioaccumulation factors (BAFs) in mussels during a six-months deployment period. Estimated logBAFs were in the ranges 2.3-5.5, 3.8-5.2 and 3.2-4.4 for metals, PCBs and PAHs, respectively. Contaminant levels in caged mussels increased rapidly to stable levels for trace metals, whereas for hydrophobic organic contaminants the increase was steady but slow and for many compounds did not reach the levels observed in native mussels. Some key issues related to mussel caging design, such as mussel deployment time and confounding influence from seasonal fluctuations, are discussed herein., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The blue mussel (Mytilus spp.) is widely used as a bioindicator for monitoring of coastal water pollution (mussel watch programs). Herein we provide a review of this study field with emphasis on: the suitability of Mytilus spp. as environmental sentinels; uptake and bioaccumulation patterns of key pollutant classes; the use of Mytilus spp. in mussel watch programs; recent trends in Norwegian mussel monitoring; environmental quality standards and background concentrations of key contaminants; pollutant effect biomarkers; confounding factors; particulate contaminants (microplastics, engineered nanomaterials); climate change; harmonization of monitoring procedures; and the use of deployed mussels (transplant caging) in pollution monitoring. Lastly, the overall state of the art of blue mussel pollution monitoring is discussed and some important issues for future research and development are highlighted., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

A combination of silicone rubber extraction and non-target and suspect screening by gas chromatography coupled to high-resolution time-of flight mass spectrometry was used for the identification of compounds in particulate matter (PM). Tunnel PM is a proxy for local road pollution that constitutes a hazard to the urban environment and human health. The use of silicone rubber for the extraction of PM allowed the pre-concentration of a wide range of compounds for non-target analysis while minimising the effects of the sample matrix. As expected, polycyclic aromatic compounds (PACs) constituted the major group of compounds identified, but only 5 of 50 PACs identified were amongst those regularly monitored and many of them were alkylated or contained a heteroatom. Urban markers of contamination such as organophosphate flame-retardants, phthalates, benzothiazoles, musk compounds and a plasticiser were also identified. The level of confidence for the identifications was high based on accurate mass, the pattern of fragmentation and retention. The unequivocal identification of 16 compounds, from all groups, was confirmed by co-chromatography with standards and the compounds semi-quantified. Most of the PACs identified are not regularly monitored, and the hazards they pose are therefore unknown. Some of these PACs are known to be more persistent and mobile in the environment than the EPA PAH16., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Losses of deuterated polycyclic aromatic hydrocarbons (PAHs) used as performance reference compounds (PRCs) in semipermeable membrane devices deployed at fifteen coastal sampling sites near Harstad harbour in Northern Norway were used to investigate photodegradation of these photosensitive compounds. Unusual PRC dissipation profiles, especially for samplers exposed <5m below the water surface are indicative of photodegradation. A strong correlation between loss rates for d12-chrysene and d12-benzo[e]pyrene with consistently higher losses of the latter was found. The observed photodegradation rates may be sufficiently high to impact PAH masses absorbed by a factor of two. This study demonstrates that photodegradation during exposure of passive water samplers needs to be taken into account, particularly with deployments close to the water surface, when using SPMD canisters, or when sampling in the Arctic., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Many contaminants are recalcitrant against degradation. Therefore, when primary sources have been discontinued, contaminated sediments often function as important secondary pollution sources. Since the management and potential remediation of contaminated marine sediments may be very costly, it is important that the environmental risks of contaminants present in these sediments and benefits of remediation are evaluated as accurately as possible. The objective of this study was to evaluate the bioavailability of common organochlorine contaminants and polycyclic aromatic hydrocarbons (PAHs) in selected polluted sediments from Norway by simple generic sorption models (free energy relationships), as well as by pore water concentration measurements. Furthermore, the aim was to predict bioaccumulation from these bioavailability estimates for comparison with in vivo bioaccumulation assessments using ragworm (Nereis virens) and netted dogwhelk (Hinia reticulata). Predicted biota-to-sediment accumulation factors (BSAFs) derived from pore water concentration estimates were in better agreement with the bioaccumulation observed in the test organisms, than the generic BSAFs expected based on linear sorption models. The results therefore support that site-specific evaluations of bioaccumulation provide useful information for more accurate risk assessments. A need for increased knowledge of the specific characteristics of benthic organisms, which may influence the exposure, uptake and elimination of contaminants, is however emphasized., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Freely dissolved pore water concentrations of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), penta- and hexachlorobenzene (PeCB and HCB), octachlorostyrene (OCS), p,p'-DDE and p,p'-DDD were measured in bottom sediments from three sites in Norway. Sediments were from Aker Brygge, site of a former shipyard in the inner part of Oslofjord, Frierfjord in the Grenlandsfjord area, impacted during the 50 year-long activity of a magnesium smelter plant, and from Kristiansand harbour, site with high industrial activity. Low density polyethylene (LDPE) membrane samplers were exposed to these sediments in laboratory incubation under constant and low-level agitation for periods of 1, 2, 6, 13, 23 and 50 days. Freely dissolved pore water concentrations were estimated from contaminant masses accumulated and sampling rates obtained from the measurement of kinetics of dissipation of performance reference compounds (PRCs). Marked differences in freely dissolved PAH concentrations and resulting organic carbon-normalised sediment-pore water partition coefficients, logK(TOC), between these three sediments could be observed despite the generally similar total sediment concentrations. In contrast with the PAH data, partitioning of PCBs and other organochlorine compounds (OCs) was relatively similar in all three sediments. For sediments from Frierfjord and Kristiansand, logK(TOC) values were lower for PCBs/OCs than for PAHs, indicating higher availability. Similar partitioning of PAHs and PCBs/OCs was found for sediments from Aker Brygge. No simple logK(oc)-logK(ow) relationships could model these data successfully. These results support the notion that the assessment of the risk posed by these compounds present in sediments in most cases requires actual measurement of contaminant availability., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Until now, water quality monitoring has relied heavily on spot sampling followed by instrumental analytical measurements to determine pollutant concentrations. Despite a number of advantages, this procedure has considerable limitations in terms of (i) temporal and spatial resolution that may be achieved at reasonable cost, and (ii) the information on bioavailability that may be obtained. Successful implementation of the Water Framework Directive (2000/60/EC) across EU member states will require the establishment and use of emerging and low-cost tools as part of monitoring programmes. These techniques may complement monitoring already in place by providing additional information with the aim to obtain a more representative picture of the quality of a water body. This article considers the limitations associated with current monitoring practice and presents, in the form of a review, emerging biological and chemical monitoring tools that may become part of a 'toolbox' of techniques for use by those in charge of assessing water quality. Biological monitoring techniques include biomarkers, biosensors, biological early warning systems and whole-organism bioassays. Sampling and analytical tools developed for chemical assessment comprise biosensors, immunoassays, passive samplers, and sensors. Descriptions of these devices and a discussion of their suitability for different types of monitoring detailing advantages and limitations are presented. Finally, quality assurance and quality control or method validation issues are summarised.