Search

Selective imaging of superoxide anion is important for understanding its role in cell membrane biology, but is often a challenging task because of the lack of an effective fluorescence probe. In this study, a new near-infrared fluorescent probe (SHX-O) that can target cell membrane was developed for imaging superoxide anion. SHX-O was designed by simultaneously incorporating a sulfonated bis-indole and a diphenylphosphinyl recognition group into the hemicyanine moiety. The probe itself showed a rather weak fluorescence due to the hemicyanine's hydroxyl substitution; however, its reaction with superoxide anion caused a large enhancement of near-infrared fluorescence at 790 nm. Moreover, SHX-O exhibited not only high selectivity for superoxide anion over other reactive oxygen species, but also specific cell membrane localization, which may be attributed to the probe's amphiphilic structure. Using the probe, fluorescence imaging of cell membrane superoxide anion produced in the presence of xanthine oxidase and xanthine has been achieved in living cells. We believe that SHX-O may serve as a potential tool for imaging and investigating superoxide anion of cell membrane., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Anions are critical to all life forms. Anions can be absorbed as nutrients or biosynthesized. Anions shape a spectrum of fundamental biological processes at the organismal, cellular, and subcellular scales. Genetically encoded fluorescent biosensors can capture anions in action across time and space dimensions with microscopy. The firsts of such technologies were reported more than 20 years for monoatomic chloride and polyatomic cAMP anions. However, the recent boom of anion biosensors illuminates the unknowns and opportunities that remain for toolmakers and end users to meet across the aisle to spur innovations in biosensor designs and applications for discovery anion biology. In this review, we will canvas progress made over the last three years for biologically relevant anions that are classified as halides, oxyanions, carboxylates, and nucleotides., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study demonstrates the expanded application of ion-exchange stationary phases (including strong cation exchange, SCX and strong anion exchange, SAX) in supercritical fluid chromatography (SFC), and more importantly, provides a deeper understanding of the retention mechanisms of these two stationary phases when using the same acidic additive. Phenylpropionic acid compounds (belonging to phenolic acids) were selected as probes. On the SCX column, the π-π and polar interactions originating from the bonded benzenesulfonic acid groups were important foundations for prolonging the retention time of solutes, but they were also the main reason for solutes' tailing profiles. It was found that adding 0.1 % phosphoric acid can generate sufficient strength of electrostatic repulsion to obtain satisfactory peak shapes. Here, phosphoric acid can be adsorbed on the surface of the stationary phase to accumulate more negative charges, and at the same time, the phosphate anion and the phenylpropionic acid in mobile phase might combine into the contact ion pair (CIP)- like through the polar interactions to form the apparently negatively charged solute. On the SAX column, phosphate anions generated by ionization of phosphoric acid, were considered as counterions to effectively mask the electrostatic attraction of quaternary ammonium groups, to significantly reduce the retention of phenylpropionic acids, but improve their resolution. Finally, utilizing two developed SFC methods, i.e., SCX with MeOH + 0.1 % phosphoric acid in CO 2 , or SAX with MeOH + 0.3 % phosphoric acid in CO 2 , the baseline separation of the extract of Lonicerae Japonicae Flos was achieved within 6 min and 10 min, respectively., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Core-shell composite microspheres are increasingly favored for the development of stationary phases due to their ability to integrate the monodispersity of inner core with the functional versatility of outer shell. In this study, poly(styrene-divinylbenzene)@(tris(4-aminophenyl)amine-p-phthalaldehyde-triethylenetetramine) (PS-DVB@TAPA-PPA-TETA) core-shell composite microspheres were constructed via an amine-aldehyde condensation reaction. The resultant microspheres were subsequently quaternized using the residual amine groups of TETA in the shell to create an effective anion-exchange stationary phase. The composite microspheres were characterized by SEM, FTIR, N 2 adsorption-desorption experiment, et al. According to the results, the surface of PS-DVB microspheres was wholly covered by TAPA-PPA-TETA. The obtained PS-DVB@TAPA-PPA-TETA exhibited good reactivity, mechanical and chemical stability. The customized column exhibited good separation performance for seven conventional anions, five organic acids and three carbohydrates. The results demonstrate that PS-DVB@TAPA-PPA-TETA is a highly suitable material for the preparation of ion chromatographic stationary phase, exhibiting exceptional chemical stability and robust chromatographic performance in practical application. Finally, the customized column was successfully utilized for the determination of phosphate in waste acid sample., Competing Interests: Declaration of competing interest All authors agree with the submission of this paper, and there is no conflict of interest in the submitted paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In the present research, we investigate Congo red (CR) removal by layered double hydroxide and oxide AlCa on cellulose acetate (CA) fiber as anion-adsorbents in aqueous solution. The as-prepared composite was characterized by FE-SEM, XRD, FTIR, EDS-mapping and BET-BJH analyses. The CR adsorption ability on AlCa LDH/CA and AlCa LDO/CA adsorbents was evaluated. The removal property, dye adsorption and filtration properties of the AlCa LDO/CA composite were studied for removal CR based on central composite design (CCD) technique through investigating operational variables (temperature, adsorbent dosage, pH and contact time). The fabricated AlCa LDO/CA composite indicates a high removal efficiency up to 98.7 % for the CR removal in the 16 min. The data of the adsorption equilibrium were described by the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms, and exhibited that AlCa LDH/CA fibers and AlCa LDO/CA fibers followed a pseudo-second-order kinetic model and Langmuir isotherm. The stability of Al-Ca-LDO/CA fibers nanocomposite was indicated that it was >95 % after eight cycles for removal of CR in the batch method on stirrer. The findings illustrated that appropriate AlCa LDO/CA fiber could be an efficient technique for CR elimination., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Green hydrogels were synthesized from carboxymethyl guar gum (CMGG)-polyacrylic acid (PAAc) via gamma irradiation at doses of 10-40 kGy, they were codes as (CMGG/PAAc). FTIR spectroscopy was applied to confirm the chemical transformation of GG into the hydrogel formulations while the 1 HNMR was employed to confirm the successful preparation of CMGG. TGA, XRD, and AFM were used to compare the improved formulation to native and CMGG. The investigated hydrogels were then applied comparatively to remove methylene blue (MB) and methyl orange (MO) dyes from aqueous solution under various operating parameters. In addition, the AFM was used comprehensively to address the adsorption process by comparing the surface topographies, height and roughness measurements between the dry and dye-loaded hydrogel. Four adsorption isotherms were investigated in order to go deep through the adsorption mechanism. These are Langmuir Freundlich, Redlich-Peterson and Jovanovich isotherms. Based on the values of R 2 for all the models, it can be assumed that the Langmuir model is best appropriate for the adsorption process and that the dyes were adsorbed onto a homogenous surface. Kinetic tests showed that the pseudo-second-order model best fitted the adsorption process, with R 2 values of 0.9999 for both dyes, confirming chemisorption as the rate-limiting step. The thermodynamic data indicates spontaneous, exothermic adsorption processes, with Gibbs free energy changes (∆G) for MB ranging from -11.265 to -10.82 kJ/mol and MO from -3.221 to -3.323 kJ/mol. Negative enthalpy changes (∆H) of -17.892 kJ/mol for MB and - 17.005 for MO show the exothermic nature of adsorption. The data proved effective removal of MB and MO dyes onto CMGG/PAAc hydrogels with better affinity for MB dye, making them excellent wastewater treatment adsorbents., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

We aimed at investigating the effect of different anionic polysaccharides (pectin, carboxymethylcellulose, and gum Arabic) on the physicochemical properties and stability of whey protein isolate (WPI)- stabilized solid-in-oil-in-water (S/O/W) bilayer emulsions loaded with epigallocatechin gallate (EGCG). S/O/W emulsions were prepared by homogenizing EGCG-loaded oil with an aqueous phase containing WPI and the selected polysaccharides. The emulsions were characterized for their particle size, zeta potential, microstructure, and rheological properties. Results noted that WPI-pectin stabilized emulsions demonstrated the best stability, with the smallest mean particle diameter (0.46 μm), highest zeta potential (-26.13 mV), and improved viscoelastic properties. Most importantly, WPI-pectin stabilized emulsions achieved the highest EGCG encapsulation efficiency (84.50 %) and adsorbed protein content (64.98 %), where their values in WPI-gum and WPI-carboxymethylcellulose were (57.87 and 67.33 %) and (44.57 and 53.22 %), respectively. Molecular docking simulations also provided insights into the interactions between WPI, lecithin, and polysaccharides in the presence of EGCG, elucidating the interfacial layer formation. This study highlights the potential of tailored protein complexes for developing stable delivery systems for polyphenols in functional food and beverage applications., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Several anions present in the extracellular matrix (ECM) not only have significant physiological functions in ECM but also play an important role in regulating peptide-based self-assembly. Herein, we have employed a non-conventional approach to overcome the limitations of the positively charged Cardin-motif peptide that failed to self-assemble at physiological pH. We used a simple and elegant strategy by employing different anions such as HPO 4 2- , Cl - and I - to mask the overall surface charge of peptide. Interestingly, these anions were utilized to modulate the nanostructure formation and mechanical stiffness of peptide hydrogels owing to their differential interactions with water molecules according to the Hofmeister series. Interestingly, these anions induced hydrogels showed diverse cellular responses on two different cell lines, fibroblast and neuronal, indicating diverse application potential of the new scaffold. Thus, this study emphasizes the importance of anions to regulate the self-assembly of Cardin-motif peptide and this approach can be utilized in developing the ideal biomimetic model of ECM for futuristic applications., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This work describes the synthesis and properties of new surface active (octyl-, and dodecyl-) imidazolium and choline-based ionic liquids with pharmaceutically active 5-fluorouracil anion (SAAPI-IL). The effect of the novel SAAPI-IL on the secondary and tertiary structure of bovine serum albumin (BSA) was studied using circular dichroism (CD) spectroscopy. The binding constants of BSA with SAAPI-IL were estimated from the fluorescence quenching of BSA. The influence of the length of the alkyl chain SAAPI-IL on the binding constant with BSA was analyzed. The localization of ions on BSA was estimated using the molecular docking method. Also, the effect of alkyl substituent length on the aggregation tendency of SAAPI-IL was studied by dynamic light scattering (DLS). Cytotoxicity and selectivity of SAAPI-ILs on cancer and normal cell lines were compared to molecular 5-fluorouracil and API-IL without the alkyl substituents. Surprisingly, increasing the length of the alkyl substituent did not increase the binding of SAAPI-IL to BSA. On the other hand, [C 8 Ch][FU] showed selectivity against A 549 cell line, which 5-fluorouracil does not possess., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sodium alginate (SA) was grafted to poly (acrylonitrile-co‑sodium acrylate-co-acrylic acid). The grafted copolymer was crosslinked with N. N, methylene bis acrylamide (MBA). Silver nanoparticles (AgNPs) were generated in situ within the growing polymer network by reducing 0.1 mM silver nitrate with 0.05 mM ascorbic acid (ASA). The effect of initiator concentration, total monomer concentration, SA weight%, MBA weight% and acrylonitrile (AN):sodium acrylate (NaAA)/ acrylic acid (AA) molar ratios on the grafting were studied. The nanocomposite was characterized and used for adsorption of methylene blue (MB) dye from water. The composite was also used for photocatalytic degradation of the dye in the presence of sun light. The Box-Behnken design (BBD) of response surface methodology (RSM) with different compositions resulted in an optimized composition of 5:1 M ratio of AN:NaAA/AA, 1 wt% MBA and 2 wt% SA. The nanocomposite (SACP5Ag) prepared with the optimized composition showed an equilibrium batch adsorption(q e , mg/g)/removal(R)% of 245/98 from 50 mg/L MB dye in water and a q e /R% of 18.87/31.4 in a fixed bed adsorption at a feed inlet concentration(mgL -1 )/inflow rate (mLmin -1 )/bed height (mm) of 100/20/25. The composite showed a photocatalytic degradation efficiency of 98 % in sunlight for 80 min and a 1st order rate constant of 0.02 min -1 ., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Selective adsorption of arsenic in co-existing oxyanions competition systems remains a significant challenge in water treatment due to the limitations of adsorbent materials that often overlook competitive adsorption, resulting in an overestimation of their actual purification potential for target contaminants. In this study, a novel hydrogel bead adsorbent, composed of water treatment residuals (WTRs) and chitosan (Chi), was developed to selectively remove arsenic, while minimizing the interference from phosphate, which is the strongest and most representative competitor in multi-oxyanion systems. The WTRs-Chi beads (WCB) adsorbents were optimized by adjusting the ratios of WTRs:Chi, with characterization results indicating that increased WTR doping improved the degree of crosslinking and the formation of bidentate complexes with enhanced electrostatic selectivity. Importantly, the co-existence of phosphate had minimal adverse effects on arsenic removal compared to other reported adsorbents. The maximum adsorption capacity for As (V) in the binary system was 34.12 mg/g, and the adsorption behavior was fitted well by the pseudo-second-order kinetic model and the extended Langmuir isotherm model. The experimental results, supported by X-ray photoelectron spectroscopy analysis (XPS), revealed that both As (V) and P (V) adsorption in the single system were driven by electrostatic attraction and ligand exchange. However, in the binary system, the inhibition of P (V) adsorption was attributed to competitive desorption caused by electrostatic repulsion, which hindered the formation of inner-sphere complexes. This study provides a practical approach for developing selective adsorbents to address arsenic contamination in complex water environments and promotes the recycling of municipal solid waste., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

This brief review highlights recent advances in the transport of oxoanions using synthetic carriers, focusing on both progress and ongoing challenges in the field. The difficulty of transporting these oxoanions increases with their hydration enthalpies, with less hydrated nitrate and perchlorate being relatively easy to transport. Recent progress has focused on the transport of moderately hydrated anions such as bicarbonate and carboxylates, where studies are influenced by the free diffusion of neutral species obtained by (de)protonation equilibria. Despite significant innovations in the design of synthetic carriers, the transport of the highly hydrated oxoanions sulfate and phosphate remains a major challenge. Progress on sulfate transport has stalled, while the first example of phosphate transport was reported only last year., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The application of cellulose nanocrystals (CNCs) in enhanced oil recovery (EOR) is a developing hotspot. To improve the stability of CNCs in salt environments, the effects of sodium dodecylbenzene sulfonate (SDBS) and polyoxyethylene sorbitan monooleate (Tween 80) on the stability of CNCs in the presence of sodium (Na + ), calcium (Ca 2+ ) and magnesium (Mg 2+ ) were investigated. The range of salt ions and the stability mechanism for improving the CNCs stability in the presence of SDBS and Tween 80 were pointed out. SDBS improved the stability of CNCs in the presence of 30-100 mM Na + , 1-2 mM Ca 2+ and 2 mM Mg 2+ , respectively. Tween 80 improved the stability of CNCs in the presence of Na +  ≤ 300 mM, Ca 2+  ≤ 10 mM and Mg 2+  ≤ 10 mM, respectively. The mechanism was explained by the bridging effect of salt ions, electrostatic effect and spatial stability effect. The combined systems of surfactants (SDBS and Tween 80) with CNCs exhibited strong emulsifying properties, low interfacial tension (0.023 mN/m and 1.85 mN/m), and the ability to alter the wettability of oil wet rocks. This made the combined systems have better oil displacement performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The generation of negative air ions (NAI) by furniture contributes to indoor air purification and enhances the living environment. However, commercially available furniture typically relies on surface coatings to release NAI. Over time, the degradation of these coatings leads to a significant decline in NAI release performance, presenting a persistent challenge for sustained effectiveness. Here, a novel sustainable wood-based negative air anion generator (SWNG) had been developed, utilizing a cellulose framework as the substrate. The in-situ synthesis of polylactic acid (PLA) within the wood incorporated titanium dioxide (TiO 2 ), tourmaline (TL), and cellulose acetate, firmly anchoring these materials within the wood structure. Compared to the cellulose framework alone, the NAI production of the SWNG had increased by 406.67 %. The impregnation with PLA enhanced the enduring photocatalytic activity of TiO 2 and TL in this innovative wooden NAI generator. After undergoing 200 cycles of testing between -40 °C and 50 °C, it continued to sustain NAI production, demonstrating exceptional antibacterial performance. Overall, this study introduced a novel sustainable wood-based negative air ion generator as a highly stable material with sustainable properties, offering significant potential for applications in improving indoor air quality and in the domain of home construction., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sustainable and environmentally friendly cellulose nanofiber (CNF) has unique advantages and properties for preparing porous materials for various applications. This study reports a CNF foam developed via an environmentally friendly, expeditious and cost-effective process using sodium dodecyl sulfate (SDS) and citric acid (CA) as an anionic surfactant and a bio-based green crosslinker. Incorporating 0.5 wt% SDS into CA-crosslinked CNF foam significantly enhances its porous structure, indicating the highest porosity (>99.24 %) and a very low density (18.59 mg/cm 3 ). The performance improvement is attributed to the formation of robust ester bonds through chemical crosslinking, which stabilizes the foam's microstructure and enhances its mechanical strength. Additionally, the SDS facilitates better foaming and reduces surface tension, promoting uniform distribution of pores. The foam shows better mechanical properties and antioxidant behavior than the neat CNF foam. Moreover, adding SDS into the CA-crosslinked NC foam exhibits lower thermal conductivity (0.029 W/mK) and diffusivity than commercial insulation foams, including polyurethane foam. Finally, a superhydrophobic CA-crosslinked CNF foam is made by a water-based hydrophobic treatment (water contact angle = 150°), indicating its waterproof behavior., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Biominerals, as complex organic-inorganic nanocomposites synthesized by organisms, exhibit unique properties across various scales. This study investigates the role of soluble organic molecules, specifically acidic polysaccharides such as N-carboxymethyl chitosan (CMC) and chondroitin 6-sulfate (ChS), in regulating the formation of calcium carbonate mesocrystals. Using a precipitation method, the effects of these polymers on the morphology, size, and polymorphism of mesocrystals were evaluated. The findings reveal that the interactions between calcium carbonate and the polymers dictate the morphology of primary nanoparticles, which subsequently assemble into spherical or rod-shaped mesocrystals. Carboxylated polymers were found to stabilize the vaterite phase, while sulfated polymers favored calcite formation. By fine-tuning the polymer quantities, addition rate, and mixing technique, the size and aspect ratio of the mesocrystals can be precisely controlled, enabling targeted morphogenesis. This strategy not only advances the design of tailored mesocrystals but also deepens our understanding of nonclassical crystallization processes mediated by soluble organic biomacromolecules., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This short review highlights recent examples of small-molecule anion transporters reported in the literature that have potentially useful biological activity. This includes anionophores with antibiotic or antifungal activity, anticancer activity, or the potential to treat channelopathies such as cystic fibrosis. Additionally selective and targeted anion transporters are also discussed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Microalgae protein (MP) have emerged as a focal point of research within food processing due to its nutritional value and foaming properties. However, its isoelectric point around pH 4 leads to it susceptible to collision, binding, and precipitation. Additionally, MP has poor emulsification properties and only shows stability under strongly alkaline conditions. This study investigated the effects of food-grade anionic polysaccharides (guar gum (GG), gum arabic (GA), low acyl gellan gum (LG), and pectin (PT)) on the molecular structure and emulsification properties of MP. Results indicated that these anionic polysaccharides enhanced the UV absorption of MP near 620 nm, especially at 14 % content, while fluorescence intensity decreased due to amino acid residues masking without structural changes. The addition of polysaccharides resulted in bimodal or multimodal particle size distributions, with LG and PT showing larger particle sizes. At pH 4, negatively charged polysaccharides formed stable complexes with near-neutral MP, improving solution stability via electrostatic repulsion and diminishing turbidity. The droplet distribution analysis indicated that higher anionic polysaccharide ratios (1:4, 1:2, and 1:1) correlated with smaller droplet sizes and increased emulsion stability. Zeta-potential measurements revealed negative charges for emulsions, with LG-MP and PT-MP complexes displaying higher absolute values (15.0 to 20.7 mV) compared to GG-MP and GA-MP complexes, indicating superior stability. Storage stability analysis showed that LG-MP and PT-MP complexes stabilized emulsions had minimal delamination over two weeks. Rheological assessments showed that increasing GG and GA contents from 14 % to 50 % had negligible effects on apparent viscosity, while LG-MP (1:1) complexes stabilized emulsion displayed higher viscosity compared to PT-MP emulsions. Frequency sweep results showed that GG-MP, GA-MP, and LG-MP emulsions had greater elastic moduli (G') than viscous moduli (G"), indicating elastic behavior, whereas PT-MP emulsions transitioned from liquid-like to solid-like behavior as frequency increased. This study illustrates the advantages of high LG and PT content in preventing particle aggregation and enhancing emulsion stability, providing a theoretical and practical foundation for MP applications in food processing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Lignin has gained significant attention in wastewater treatment due to its abundant resources and good adsorbability. In this work, magnetic lignin micro-nano spheres (Fe 3 O 4 @SiO 2 -LNS) was prepared using alkali lignin as the raw material, and was used as the adsorbent and catalyst to activate peroxymonosulfate (PMS) to build an inhomogeneous catalytic oxidation system (Fe 3 O 4 @SiO 2 -LNS/PMS). The system was then used to remove the stubborn acid blue 9 (AB9) dye in wastewater, and the effects of pH, catalyst dosage, PMS dosage of the system on the removal percentage of AB9 dye and the corresponding degradation mechanism were explored. The results showed that Fe 3 O 4 @SiO 2 -LNS/PMS system had good removal efficiency for AB9 in wastewater, and AB9 dye was completely oxidized and finally degraded into CO 2 and H 2 O. The maximum removal percentage of AB9 was observed when the pH and temperature of the system were 6.0 and 313 K, and the removal percentage of AB9 achieved 100 % when the optimal dosage of Fe 3 O 4 @SiO 2 -LNS and PMS were 3.44 g/L and 53.15 mM, respectively. In addition, Fe 3 O 4 @SiO 2 -LNS had good stability and reusability. This work provides a promising approach for abatement of dyeing wastewater pollution and a new direction for high-value utilization of alkali lignin., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Gemini surfactants (GS) could serve as the drug carrier agents for the delivery of macromolecules due to the excellent properties and tuneable structures. Little attention has been paid to the impact of counterion change on GS and the interaction between GS and protein. In this work, ibuprofen (Ibu) replaced quaternary ammonium ion GS (GS-Ibu) with the hydrophobic chain length of 8, 10, 12, 14 and 16 carbon atoms were prepared for the first-time using extraction technology. The prepared GS-Ibu has stronger electrostatic interaction compared to traditional gemini surfactants with bromide anions (GS-Br). GS were further incubated with the model macromolecule, bovine serum albumin (BSA), to form BSA/GS complexes. The colloid stability of BSA could be affected by the concentration of GS, the length of hydrophobic chain and the type of anion. GS-Ibu exhibited better ability to prevent BSA from aggregating based the result of PAGE test. The molecular level change of BSA after the introduction of GS was first reflected by UV-Visible absorption spectrum. CD spectrum results further revealed that the primary interaction leading to the change in the secondary structure of BSA is electrostatic interaction. Molecular docking and molecular dynamic simulations confirmed the presence of hydrophobic and electrostatic interaction between BSA and GS. In conclusion, the anion replaced GS could be a promising strategy to stabilize the proteins., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Fungal lipolytic enzymes play crucial roles in various lipid bio-industry processes. Here, we elucidated the biochemical and structural characteristics of an unexplored fungal lipolytic enzyme (TaLip) from Thermoascus aurantiacus var. levisporus, a strain renowned for its significant industrial relevance in carbohydrate-active enzyme production. TaLip belongs to a poorly understood phylogenetic branch within the class 3 lipase family and prefers to hydrolyze mainly short-chain esters. Nonetheless, it also displays activity against natural long-chain triacylglycerols. Furthermore, our analyses revealed that the surfactant sodium dodecyl sulfate (SDS) enhances the hydrolytic activity of TaLip on pNP butyrate by up to 5.0-fold. Biophysical studies suggest that interactions with SDS may prevent TaLip aggregation, thereby preserving the integrity and stability of its monomeric form and improving its performance. These findings highlight the resilience of TaLip as a lipolytic enzyme capable of functioning in tandem with surfactants, offering an intriguing enzymatic model for further exploration of surfactant tolerance and activation in biotechnological applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Therapeutic oligonucleotides are becoming an important class of therapeutics. Their manufacturing processes can result in the formation of impurities, particularly truncated species. To ensure the quality and safety of the product, it is crucial to evaluate the presence of these species. Liquid chromatography analysis enables such purity determination. In this context, a recently described weak anion exchange chromatography method was optimized to allow the effective separation of different impurities. The optimization addressed the complexity and instability of the mobile phases, which contained salts and organic compounds. Adjustments were made to the mobile phase composition and gradient to meet the requirements of QC laboratories. Additionally, to ensure the method's reliability, a robustness study was conducted based on a risk assessment. Five factors were considered potential risks and were assessed experimentally on different chromatographic outputs. This led to the definition of a robust space, ensuring the method's reliability for the purity determination of oligonucleotides., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Ficin fully immobilized on Asp-agarose beads at pH 7 but not on an aminated support. This made enzyme adsorption plus glutaraldehyde modification non-viable for this enzyme. Modifying glyoxyl-agarose beads with mixtures of Asp and 1,6-hexamethylenediamine (HA) at different ratios, mixed anion/cation exchanger supports were built. Only if HA greatly exceed Asp in the support, immobilization did not work. While only using the Asp-agarose support immobilized enzyme molecules were only ionically adsorbed after glutaraldehyde treatment (visualized in SDS-PAGE analysis), the mixed supports gave covalent immobilization. The glutaraldehyde modification of these biocatalysts permitted to establish covalent bonds with the support, and this was more effective when using higher amounts of HA in the support. When around 60 % of the groups in the support were HA, the treatment with glutaraldehyde fully suppressed enzyme release from the support after boiling in SDS. The glutaraldehyde treated biocatalysts were more stable than just the adsorbed enzymes or the enzyme adsorbed only on Asp supports and then treated with glutaraldehyde (the optimal biocatalyst retained 90 % of the initial activity while the just adsorbed ficin retained 50 % of the initial activity). This strategy can be utilized to immobilize other proteins with high isoelectric points following this immobilization strategy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Interaction of β 2 -glycoprotein I (β 2 GPI) with anionic membranes is crucial in antiphospholipid syndrome (APS), implicating the role of its membrane-binding domain, domain V (DV). The mechanism of DV binding to anionic lipids is not fully understood., Objectives: This study aimed to elucidate the molecular details of β 2 GPI DV binding to anionic membranes., Methods: We utilized molecular dynamics simulations to investigate the structural basis of anionic lipid recognition by DV. To corroborate the membrane-binding mode identified in the highly mobile membrane mimetic simulations, we conducted additional simulations using a full membrane model., Results: The study identified critical regions in DV, namely the lysine-rich loop and the hydrophobic loop, which are essential for membrane association via electrostatic and hydrophobic interactions, respectively. A novel lysine pair contributing to membrane binding was also discovered, providing new insights into β 2 GPI's membrane interaction. Simulations revealed 2 distinct binding modes of DV to the membrane, with mode 1 characterized by the insertion of the hydrophobic loop into the lipid bilayer, suggesting a dominant mechanism for membrane association. This interaction is pivotal for the pathogenesis of APS, as it facilitates the recognition of β 2 GPI by antiphospholipid antibodies., Conclusion: The study advances our understanding of the molecular interactions between β 2 GPI's DV and anionic membranes, which are crucial for APS pathogenesis. It highlights the importance of specific regions in DV for membrane binding and reveals a predominant binding mode. These findings have significant implications for APS diagnostics and therapeutics, offering a deeper insight into the molecular basis of the syndrome., Competing Interests: Declaration of competing interests There are no competing interests to disclose., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Hyaluronic acid (HA) is a glycosaminoglycan essential for cellular processes and finding increasingly applications in medicine, pharmaceuticals, and cosmetics. While membrane-integrated Class I hyaluronan synthase (HAS) catalyzes HA synthesis in most organisms, the molecular mechanisms by which HAS-lipid interactions impact HAS catalysis remain unclear. This study employed coarse-grained molecular dynamics simulation combined with dimensionality reduction to uncover the interplay between lipids and Streptococcus equisimilis HAS (SeHAS). A minimum of 67 % cardiolipin is necessary for HA synthesis, as determined through simulations using gradient-composed membranes. The anionic cardiolipin stabilizes the cationic transmembrane regions of SeHAS and thereby maintains its conformation. Moreover, the highly dynamic cardiolipin is required to modulate the catalysis-relevant motions in HAS and thus facilitate HA synthesis. These findings provide molecular insights essential not only for understanding the physiological functions of HAS, but also for the development of cell factories and enzyme catalysts for HA production., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest with the contents of this article., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Large synthetic oligonucleotides such as guide ribonucleic acid (gRNA), a critical reagent in clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 genome editing, have complex higher order structures (HOS) inherent in their design. In this study, we first developed a generic anion exchange chromatography (AEX) method for the comprehensive analysis of a 100mer single guide ribonucleic acid (sgRNA) impurity profiling. AEX demonstrated superior resolution compared to other common chromatographic methods employed for sgRNA analysis, such as Ion-Pairing Reversed Phase Liquid Chromatography (IP-RPLC) and Hydrophilic Interaction Chromatography (HILIC). Moreover, we discovered AEX's potential in probing the HOS of RNAs by adjusting the temperature and using organic additives. Our study also highlighted that sgRNA possesses a unique HOS distinctly different from other therapeutic nucleic acids, such as antisense oligonucleotides and messenger RNAs., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Bingchuan Wei reports financial support was provided by Genentech Inc., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The structure of zwitterion has great impact on the separation properties of zwitterionic hydrophilic stationary phases. To better understand the role of anionic groups of zwitterions, a novel carboxybetaine-based zwitterionic monolithic column was first prepared through thermo-initiated copolymerization of functional monomer (3-acrylamidopropyl)-dimethyl-(2-carboxymethyl) ammonium (CBAA) and crosslinker ethylene dimethacrylate (EDMA) within 100 μm ID capillary. The optimal poly(CBAA-co-EDMA) monolithic column exhibited satisfactory mechanical and chemical stability, good repeatability, high column efficiency (96,000 plates/m), and excellent separation performance for different classes of polar compounds (i.e., phenols, monophosphate nucleotides, urea and allantoin). A comparative study was then performed among three zwitterionic hydrophilic stationary phases containing different anionic groups, i.e. poly(CBAA-co-EDMA) (carboxybetaine), poly(2-{2-(methacryloyloxy) ethyldimethylammonium}ethyl n-butyl phosphate-co-EDMA) (phosphocholine), and poly(N,N-dimethyl-N-(3-methacrylamidopropyl)-N-(3-sulfopropyl) ammonium betaine-co-EDMA) (sulfobetaine) using benzoic acid derivatives, amine compounds, nucleobases and nucleosides as model analytes. The carboxybetaine-based monolithic column exhibited much higher positive zeta-potential and hydrophilicity, which endows it with a stronger retention capacity for acidic and neutral compounds, but sulfobetaine-based monolithic column exhibited much higher selectivity and retention capacity for the amines. Moreover, their enrichment efficiencies for N-glycopeptides were also evaluated based on their different hydrophilicity, and it was observed that the poly(CBAA-co-EDMA) monolithic material captured 4-8 times more N-glycopeptides compared to the other two materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Organic anionic dyes are major water pollutants due to their low degradability caused by complex aromatic structures. Not only do they exert toxic, mutagenic, teratogenic, tumorigenic, and genotoxic effects, but they also decrease fertility and cause irritation to the skin and respiratory system in humans. This long-term toxicity has detrimental effects on aquatic organisms and their surroundings, resulting in an imbalanced ecosystem. In this study, a Cs@Fe 3 O 4 magnetic biosorbent was synthesised to uptake three anionic dyes and characterised for FTIR, BET/BJH, XRD, TGA, VSM, and FESEM analyses. The biosorbent average surface area was confirmed to be 52.6524 m 2 /g, with average pore sizes of 7.3606 nm and 6.9823 nm for adsorption-desorption processes, respectively. Batch adsorption studies pH values, contact times, temperature, initial dye concentrations, and adsorbent dosages were examined. Several isotherm and kinetic models were studied to determine the adsorption mechanism. The adsorption data of these dyes at equilibrium was observed to match Langmuir's isotherm and pseudo-second-order kinetic models. The thermodynamic study revealed that the adsorption process for these dyes was an exothermic reaction. Maximum adsorption capacities for congo red, methyl orange, and metanil yellow were 117.77 mg/g, 137.77 mg/g, and 155.57 mg/g, respectively. The reusability of recovered Cs@Fe 3 O 4 after dye adsorption was evaluated up to five continuous adsorption-desorption cycles for its possible industrial applications., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: NINIE SUHANA BT ABDUL MANAN reports financial support was provided by Malaysia Ministry of Higher Education. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Five types of sulfobutylether-β-cyclodextrin (SBE-β-CD) and carboxymethyl-β-cyclodextrin (CM-β-CD) with different degrees of substitution were synthesized, and six and five racemates were respectively chosen to study the influence of the degree of substitution on the enantioseparation factor. The synthesized SBE-β-CD and CM-β-CD were characterized using 1 H NMR spectroscopy and mass spectrometry. The results indicated that the influence of the degree of substitution on enantioseparation for distinct racemates exhibited significant variability. Increasing the degree of substitution of CM-β-CD led to an increasing enantioseparation factor, while SBE-β-CD with a specific degree of substitution provided the optimum enantioseparation factor for some racemates. The optimum enantioseparation factors of N-methyl duloxetine and duloxetine were obtained when a relatively low degree of substitution (DS = 3.5) was selected. And the optimum enantioseparation factor was obtained with a relatively high degree of substitution (DS = 7.5). SBE-β-CD with a low substitution degree of 3.5 was chosen to optimize the countercurrent chromatographic enantioseparation of N-methyl-duloxetine, which resulted in a significant improvement in peak resolution from 0.51 to 0.83. Molecular docking was used to construct three SBE-β-CDs with different degrees and distributions of substitution, and a good agreement was found between the docking results and the experimental results., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Background: Food safety has become an essential aspect of public concern and there are lots of detection means. Liquid chromatography plays a dominating role in food safety inspection because of its high separation efficiency and reproducibility. However, with the increasing complexity of real samples and monitoring requirements, conventional single-mode chromatography would require frequent column replacement and cannot separate different kinds of analytes on a single column simultaneously, which is costly and time-consuming. There is a great need for fabricating mixed-mode stationary phases and validating the feasibility of employing mixed-mode stationary phases for food safety inspection., Results: This work fabricated multifunctional stationary phases for liquid chromatography to determine diverse food additives under the mixed mode of RPLC/HILIC/IEC. Two dicationic ionic liquid silanes were synthesized and bonded onto the silica gel surface. The functionalized silica was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and elemental analysis. Both columns provide satisfactory separation performance towards 6 hydrophilic nucleosides, 4 hydrophobic polycyclic aromatic hydrocarbons, and 5 anions. Great repeatability of retention (RSD <0.1 %) and column efficiency (100330 plate/m) were obtained. Thermomechanical analysis and linear solvation energy relationship investigated the retention mechanism. Finally, the better in two prepared columns was employed to separate and determine the contents of NO 2 - and NO 3 - in vegetables(highest 4906 mg kg -1 NO 3 - in spinach), preservatives in bottled beverages (180.8 mg kg -1 sodium benzoate in soft drink), and melamine in milk with satisfactory performance and recovery rates ranging from 96.4 % to 105.6 %., Significance: This work developed a novel scheme for preparing mixed-mode stationary phases by dicationic ionic liquid which provides great separation selectivity. Most importantly, this work proved the superiority of employing mixed-mode stationary phases for food safety inspection, which might avoid high-cost and frequent changes of columns and chromatography systems in the near future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

In recent studies we have reported on the near-UV light-induced degradation of iron complexes of various pharmaceutical excipients, such as Fe(III)-citrate and Fe(III)-amino acid complexes. Mechanistic studies revealed a common photo-degradation pattern, i.e. the formation of carbon dioxide radical anion, a potent reducing agent, via an alkoxyl/amino radical intermediate generated by light-induced ligand-to-metal charge transfer (LMCT) involving α-hydroxycarboxylates or amino acids. Herein, we confirm the proposed general photo-degradation pathways through the study of the iron complexes of other α-hydroxycarboxylates that may be present in protein formulations, such as lactate and glycolate. The results indicate that lactate generates even higher yields of • CO 2 - as compared to citrate, suggesting a significant potential of lactate for the promotion of photo-degradation in pharmaceutical formulations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

This paper discusses the development of an analytical method by an alternative separation approach, sequential elution liquid chromatography (SE-LC), to separate permanently charged ions (anions), weak acids, and neutral compounds using anion exchange and reversed-phase columns in tandem. SE-LC separates classes of compounds by group by employing two or more elution modes. Advantages to using SE-LC over conventional HPLC are a greater peak capacity and a reduced separation disorder. Importantly, the same HPLC as used for a conventional HPLC separation may be used to afford a successful SE-LC separation. Mobile phase selection and gradient optimization are integral for a successful SE-LC class separation of permanent anions, weak acids, and neutral compounds and will be discussed in detail in this paper. The most successful (best resolution and repeatability) SE-LC separation was achieved by applying isocratic elution at low pH to elute the weak acids, followed by an acetonitrile gradient to elute the neutral compounds, and last a sodium methanesulfonate gradient to elute the anionic compounds using a superficially porous C18 column coupled with a strong anion exchange (SAX) column. Repeatability (RSD) in the retention times and peak areas of the analytes was less than 0.25 % and 1.5 %, respectively., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Progress in the development of biodegradable or biobased ionic liquids (ILs) has led to the design of green compounds for several applications. Herein, four biocompatible dicationic ionic liquids (DILs) with ammonium-phosphonium cations and amino acid anions were synthesized and investigated their environmental impact. The structures of the DILs were confirmed by spectral analyses ( 1 H, 13 C and 31 P NMR). Furthermore, physicochemical properties such as density, viscosity and refractive index were determined. Water content, bromide content and solubility were thereafter determined as the parameters needed for further studies. Subsequently, their antifeedant activity towards economically important pests of grain in storage warehouses: the granary weevil, the confused flour beetle, and the khapra beetle was examined, showing the dependence on structure. Moreover, selected DILs were investigated for toxicity towards white mustard, Daphnia magna, and Artemia franciscana to specify the environmental impact. These studies were complemented by understand the biodegradation of DILs by bacterial communities derived from soil at the agricultural land. The result was DILs with limited environmental footprints that have great potential for further application studies., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests. Damian K. Kaczmarek reports financial support was provided by National Science Centre Poland. Damian Krystian Kaczmarek has patent pending to P.443203. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

In this study, a novel adsorbent, A-PEI/CS-Cu 2+ , was developed by crosslinking polyethyleneimine/chitosan hydrogel with acrolein and loading it with copper ions. The adsorption process of A-PEI/CS-Cu 2+ on the anionic dye acid yellow 36 (AY36) was investigated by kinetic, isothermal and thermodynamic modeling. It was noteworthy that A-PEI/CS-Cu 2+ exhibited rapid adsorption with a 90 % removal rate achieved within just 5 min, which was much faster than the adsorption rate of A-PEI/CS without load of copper ions and showed its potential for rapid adsorption applications. The maximum adsorption capacity for AY36 could reach up to 3114 mg g -1 . In addition, the high concentration of saline wastewater was found to have almost no effect on the adsorption reaction in the salt effect test experiment. In five desorption-regeneration cycle experiments, the sample exhibited good recyclability and regeneration performance. The driving force of the adsorption process mainly originated from the electrostatic interaction, hydrogen bonding, and intermolecular interaction, in which the addition of copper ions led to the enhancement of the electrostatic interaction and chelation between A-PEI/CS-Cu 2+ and AY36. Overall, the findings suggest the excellent potential of A-PEI/CS-Cu 2+ for rapid and efficient adsorption, as well as its suitability for practical applications in wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In the present study, one mononuclear Cu(II) [CuL(SCN)] (1) and one mononuclear Co(II) [CoLN 3 ] (2) complexes, with a Schiff base ligand (HL) formed by condensation of 2-picolylamine and salicylaldehyde, have been successfully developed and structurally characterized. The square planer geometry of both complexes is fulfilled by the coordination of one deprotonated ligand and one ancillary ligand SCN - (1) or N 3 - (2) to the metal centre. Binding affinities of both complexes with deoxyribonucleic acid (DNA) and human serum albumin (HSA) are investigated using several biophysical and spectroscopic techniques. High values of the macromolecule-complex binding constants and other results confirm the effectiveness of both complexes towards binding with DNA and HSA. The determined values of the thermodynamic parameters support spontaneous interactions of both complexes with HSA, while fluorescence displacement and DNA melting studies establish groove-binding interactions with DNA for both complexes 1 and 2. The molecular modelling study validates the experimental findings. Both complexes are subjected to an MTT test establishing the anticancer property of complex 1 with lower risk to normal cells, confirmed by the IC50 values of the complex for HeLa cancer cells and HEK normal cells. Finally, a nuclear staining analysis reveals that the complexes have caused apoptotic cell death., Competing Interests: Declaration of competing interest There are no conflicts of interest to mention., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The applications of polysaccharides as emulsifiers are limited due to the lack of hydrophobicity. However, traditional hydrophobic modification methods used for polysaccharides are complicated and involve significant mechanical and thermal losses. In this study, soy hull polysaccharide (SHP) and terminally aminopropylated polydimethylsiloxane (NPN) were selected to investigate the feasibility of a simple and green interfacial membrane strengthening strategy based on the interfacial polymerization of anionic polysaccharides and fat-soluble alkaline ligands. Our results show that deprotonated SHP and protonated NPN can be complexed at the water/oil (W/O) interface, reduce interfacial tension, and form a strong membrane structure. Moreover, they can quickly form a membrane at the W/O interface upon the moment of contact to produce stable all-liquid printing products with complex patterns. However, the molecular weight of NPN affects the complexation reaction. Consequently, this study has long-term implications to expanding the areas of application for anionic polysaccharides., Competing Interests: Declaration of competing interest The authors have declared no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Paper-based test film material is widely used in a variety of test instruments for different applications. The enzyme activity test paper sheet is one of the most popularly used test papers. Here we present a novel fabrication of paper-based enzyme activity test paper without cationic resin added in. The chemical pulping fibers were first beaten to different degrees (from 14.6 to 41.5°SR) with a PFI beater. After that, the fibers were modified with a cationic agent (3-chloro-2-hydroxypropyl trimethyl ammonium chloride) under the system of alkali and water solution. Finally, the test papers were made with the modified fiber by a regular paper former in lab. The results showed that beating is beneficial for the improvement of the cationization reaction which is indicated by the Zeta potential, FTIR and EDS. The main mechanisms involved are the destruction of crystalline zone, increase of free hydroxyl group and defibrillation. This hypothesis was supported by the SEM, XRD and fiber analyzer. Beating under the optimized condition, the wet strength and liquid absorbability of test paper can meet the application requirement, and the test results of enzyme activity are quite close to those of commercial test papers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Dye wastewater poses a serious threat to the environment and human health, necessitating sustainable degradation methods. In this study, Na-based Montmorillonite (MMT) was exfoliated using different ionic liquids ([C16MIM][Cl], [C16MIM][BF 4 ], [C16MIM][PF 6 ]), and silver nanoparticles (Ag NPs) were green-synthesized using hydroxypropyl cellulose (HPC). The HPC significantly enhanced the dispersion of MMT in the hydrogel. By introducing lauryl methacrylate (LMA), a hydrophobic associative network was constructed in PAM/LMA/HPC/MMT@ILs&Ag NPs hydrogel. This hydrogel demonstrated outstanding mechanical properties, with a stress of 833.21 kPa, strain of 3300 %, and toughness of 14.36 MJ/m 3 . It also exhibited excellent catalytic activity, with a rate constant of 0.83 min -1 for 4-nitrophenol degradation at 28 °C. The effects of temperature and catalyst concentration on the catalytic reaction were systematically investigated. This study presents a simple green synthesis approach for Ag NPs using HPC, achieving superior mechanical performance and stable MMT dispersion in aqueous solutions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence., (Copyright © 2024. Published by Elsevier B.V.)

Targeting the homeostasis of anions and iron has emerged as a promising therapeutic approach for the treatment of cancers. However, single-targeted agents often fall short of achieving optimal treatment efficacy. Herein we designed and synthesized a series of novel dual-functional squaramide-hydroxamic acid conjugates that are capable of synergistically modulating the homeostasis of anions and iron. Among them, compound 16 exhibited the most potent antiproliferative activity against a panel of selected cancer cell lines, and strong in vivo anti-tumor efficacy. This compound effectively elevated lysosomal pH through anion transport, and reduced the levels of intracellular iron. Compound 16 could disturb autophagy in A549 cells and trigger robust apoptosis. This compound caused cell cycle arrest at the G1/S phase, altered the mitochondrial function and elevated ROS levels. The present findings clearly demonstrated that synergistic modulation of anion and iron homeostasis has high potentials in the development of promising chemotherapeutic agents with dual action against cancers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Eco-friendly and renewable sodium alginate, as a potential alternative to fossil resources, has attracted considerable attention in wastewater treatment field. Herein, we develop a SA/PEI/PEG (sodium alginate/polyethyleneimine/polyethylene glycol diglycidyl ether) adsorbent in which SA was functionalized by PEI/PEG via a facile but effective strategy of one-pot gelation of aqueous SA/PEI/PEG solution. Systematic investigations were accomplished to explore the effects of adsorbent factors on the adsorption performances of the adsorbent towards the anionic dyes CR (congo red), AB-10B (amido black-10B), and AB-25 (acid blue-25). Strikingly, the SA/PEI/PEG exhibited exceptional adsorption performance to CR (2782 mg g -1 , 90.6 %), AB-10B (1369 mg g -1 , 90.9 %) and AB-25 (4221 mg g -1 , 92.6 %) at 30 °C, pH = 3, 200 r min -1 and oscillated 24 h, and demonstrating exceptional reusability after six cycles of adsorption-desorption cycles. Furthermore, the three kinetic, four isothermic and one thermodynamic models were used to investigate the adsorption behaviors of the adsorbent towards these dyes. The possible adsorption mechanism is suggested: Hydrogen bond interactions and electrostatic attractions between SA/PEI/PEG and the dyes primarily contribute to exceptional adsorption capacity. The SA/PEI/PEG adsorbent endowed with easy fabrication, extraordinary adsorption capacity and excellent reusability promises potential application prospects in wastewater purification industry., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hollow vesicles are promising in water treatment due to their unique structure of the membrane and inner cavity. However, the adsorption capacity needs to be improved for targeted pollutants. Herein, millimeter-scale hollow vesicles were prepared with a one-step process of sequential stirring and grafting using chitosan, diallyldimethylammonium chloride, and sodium alginate as raw materials with the purpose of efficient removal of anionic dyes from wastewater. The composite vesicles were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The hollow vesicles showed the structure of the cationic membrane and the inner cavity, facilitating the dye adsorption. The adsorption capacity for the anionic dye Reactive Black 5 reached 698.1 mg/g, more than twice that of the binary composite vesicles without graft. The adsorption kinetics and isotherm data coincided with the pseudo-second-order and Langmuir models, respectively, and the adsorption mechanism was monolayer chemisorption. Moreover, the vesicles worked well in wide ranges of environment pH, temperature, and co-existing pollutants. They also possessed excellent cyclic regeneration performance, in which 93 % of the initial adsorption capacity was maintained after four cycles. These results indicate that the millimeter-scale hollow vesicles exhibit broad application prospects for wastewater purification., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Xuejun Wang reports financial support was provided by Department of Science & Technology, Shandong Province, China. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Nowadays, dye water pollution is becoming increasingly severe. Composite of MXene, ZnS, and chitosan-cellulose material (MX/ZnS/CC) was developed to remove anionic dyes through the synergistic effect of adsorption and photocatalytic degradation. MXene was introduced as the cocatalyst to form Schottky heterostructure with ZnS for improving the separation efficiency of photocarriers and photocatalytic performance. Chitosan-cellulose material mainly served as the dye adsorbent, while also could improve material stability and assist in generation of free radicals for dye degradation. The physics and chemistry properties of MX/ZnS/CC composite were systematically inspected through various characterizations. MX/ZnS/CC composite exhibited good adsorption ability to anionic dyes with adsorption capacity up to 1.29 g/g, and excellent synergistic effects of adsorption and photodegradation with synergistic removal capacity up to 5.63 g/g. MX/ZnS/CC composite performed higher synergistic removal ability and better optical and electrical properties than pure MXene, ZnS, chitosan-cellulose material, and MXene/ZnS. After compounding, the synergistic removal percentage of dyes increased by a maximum of 309 %. MX/ZnS/CC composite mainly adsorbs anionic dyes through electrostatic interactions and catalyzes the generation of •O 2 - , h + , and •OH to degrade dyes, which has been successfully used to remove anionic dyes from environmental water, achieving a 100 % removal of 50 mg/L dye., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Since the potential carcinogenic, toxic and non-degradable dyes trigger serious environmental contamination by improper treatment, developing novel adsorbents remains a major challenge. A novel high efficiency and biopolymer-based environmental-friendly adsorbent, chitosan‑sodium tripolyphosphate-melamine sponge (CTS-STPP-MS) composite, was prepared for Orange II removing with chitosan as raw material, sodium tripolyphosphate as cross-linking agent. The composite was carefully characterized by SEM, EDS, FT-IR and XPS. The influence of crosslinking conditions, dosage, pH, initial concentration, contacting time and temperature on adsorption were tested through batch adsorption experiments. CTS-STPP-MS adsorption process was exothermic, spontaneous and agreed with Sips isotherm model accompanying the maximum adsorption capacity as 948 mg∙g -1 (pH = 3). Notably, the adsorption performance was outstanding for high concentration solutions, with a removal rate of 97 % in up to 2000 mg∙L -1 OII solution (100 mg sorbent dosage, 50 mL OII solution, pH = 3, 289.15 K). In addition, the adsorption efficiency yet remained 97.85 % after 5 repeated adsorption-desorption cycles. The driving force of adsorption was attributed to electrostatic attraction and hydrogen bonds which was proved by adsorption results coupled with XPS. Owing to the excellent properties of high-effective, environmental-friendly, easy to separate and regenerable, CTS-STPP-MS composite turned out to be a promising adsorbent in contamination treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The structural stability and therapeutic activity of Stem Bromelain (BM) have been explored by unravelling the interaction of stem BM in presence of two different types of anionic surfactants namely, bile salts, NaC and NaDC and the conventional anionic surfactants, SDDS and SDBS, below, at and above the critical micelle concentration (cmc) in aqueous phosphate buffer of pH 7. Different physicochemical parameters like, surface excess (Γ cmc ), minimum area of surfactants at air water interface (A min ) etc. are calculated from tensiometry both in absence and presence of BM. Several inflection points (C 1 , C 2 and C 3 ) have been found in tensiometry profile of surfactants in presence of BM due to the conformational change of BM assisted by surfactants. Similar observation also found in isothermal titration calorimetry (ITC) profiles where the enthalpy of micellization (ΔH 0 obs ) of surfactants in absence and presence of BM have calculated. Further, steady state absorption and fluorescence spectra monitoring the tryptophan (Trp) emission of free BM and in presence of all the surfactants at three different temperatures (288.15 K, 298.15 K, and 308.15 K) reveal the nature of fluorescence quenching of BM in presence of bile salts/surfactants. Time resolved fluorescence studies at room temperature also support to determine the several quenching parameters. The binding constant (K b ) of BM with all the surfactants and free energy of binding (∆G 0 of bile salts/surfactants with BM at different temperatures have been calculated exploiting steady state fluorescence technique. It is observed that, the binding of NaC with BM is greater as compared to other surfactants while Stern-Volmer quenching constant (K SV ) is found greater in presence of SDBS as compared with others which supports the surface tension and ITC data with the fact that surface activity of surfactant(s) is decreasing with the binding of the surfactants at the core or binding pocket of BM. Circular Dichroism (CD) study shows the stability of secondary structure of BM in presence of NaC and NaDC below C 3 , while BM lost its structural stability even at very low surfactant concentration of SDDS and SDBS which also supports the more involvement of bile salts in binding rather than surfactants. The molecular docking studies have also been substantiated for better understanding the several experimental investigations interaction of BM with the bile salts/surfactants., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Biomass chitosan has garnered considerable interest for alkaline anion exchange membranes (AEMs) due to its eco-friendly and sustainable characteristics, low reactant permeability and easily modifiable nature, but it still faces the trade-off between high hydroxide conductivity and sufficient mechanical properties. Herein, a novel functionalized attapulgite clay (f-ATP) with a unique ionic "chain-ball" surface structure was prepared and incorporated with quaternized chitosan (QCS)/polyvinyl alcohol (PVA) matrix to fabricate high-performance composite AEMs. Due to the strengthened interfacial bonding between f-ATP nanofillers and the QCS/PVA matrix, composite membranes are synergistically reinforced and toughened, achieving peak tensile strength and elongation at break of 24.62 MPa and 33.8 %. Meanwhile, abundant ion pairs on f-ATP surface facilitate ion transport in the composite AEMs, with the maximum OH - conductivity of 46 mS cm -1 at 80 °C and the highest residual IEC of 83 % after alkaline treatment for 120 h. Moreover, the assembled alkaline direct methanol fuel cell exhibits a remarkable power density of 49.3 mW cm -2 at 80 °C. This work provides a new strategy for fabricating high-performance anion exchange membranes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Dyes pollution is well known for their hazardous impacts on human health and the environment. The removal of dyes from wastewater has become an important issue. In this study, magnetic micrometer-sized particles AL-CTS@MNPs were synthesized from alkaline lignin (AL) and chitosan (CTS) by "one-pot method". The adsorbent presented higher selectivity adsorption effect on anionic dyes than amphoteric and cationic dyes, and even no adsorption effect on cationic methylene blue (MB), which showed that the anionic dyes could be better separated from the other two types of dyes. The adsorption isotherms of the dyes were highly consistent with the Langmuir model, and the maximum adsorption capacity was 329.50 mg/g for methyl orange (MO) and 20.00 mg/g for rhodamine B (RhB). AL-CTS@MNPs showed good adsorption of anionic dyes (MO) in the pH range of 3-9. Meanwhile, the adsorbent AL-CTS@MNPs were also characterized, showing rough surface with specific surface areas of 37.38 m 2 /g, pore diameter of 95.8 nm and porosity of 17.62 %. The particle sizes were ranged from 800 μm to 1300 μm. The electrostatic attraction and π-π* electron donor-acceptor interactions were the main forces between the adsorbent and anionic dyes. While the electrostatic repulsive force between the adsorbent and the cationic dyes resulted in the non-absorption of MB by AL-CTS@MNPs. Subsequently, the adsorbent maintained a removal rate of >95 % after five adsorption-desorption cycles, demonstrating its excellent stability and recoverability. Ultimately, the prepared AL-CTS@MNPs illuminated good prospect on complex components dyes wastewater treatment., Competing Interests: Declaration of competing interest The authors declare no competing financial interest. The co-authors have reviewed the manuscript and approved it for submission to this journal for consideration., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Reversed-phase high performance liquid chromatography (RP-HPLC) is the most widely used chromatographic method. In addition to hydrophobic interactions, additional interactions such as electrostatic interactions may participate in the retention behaviour of an analyte. This makes it possible to use RP-HPLC for many types of analyte. We describe a simple method for separating inorganic anions on a C18 column, in which retention of inorganic anions is almost entirely due to electrostatic interactions. This leads to rapid separations as well as higher theoretical plate numbers. We used 2 mM phosphoric acid containing a low concentration of disodium molybdate as the mobile phase, which allows UV detection of non-UV-absorbing anions. With this method, we determined eight inorganic anions including several non-UV-absorbing anions photometrically at 220 nm. The detection limits of the examined eight inorganic anions calculated at a signal-to-noise ratio of 3 were between 0.3 and 10 μM. The detector response was linear over three orders of magnitude of inorganic anion concentration. The proposed RP-HPLC/UV method was successfully applied to determine inorganic anions in some water samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Mixed-mode reversed-phase/anion-exchange chromatography (RP/AEX) is an effective method for the chromatographic analysis of acidic drugs because it combines reversed-phase chromatography (RP) with anion-exchange chromatography (AEX). However, the result repeatability for the RP/AEX analysis of acidic drugs is frequently compromised by the detrimental effects of residual silanol groups in an RP/AEX stationary phase on peak separation and analyte retention. In this study, an RP/weak-AEX stationary phase with amino anion-exchange groups, Sil-AA, was prepared. Subsequently, an RP/strong-AEX stationary phase, Sil-PBQA, was prepared by replacing the amino groups in Sil-AA with a benzene ring and a benzyl-containing quaternary ammonium salt. The chromatographic behaviors of Sil-PBQA and Sil-AA were compared, and the effect of residual silanol groups on the chromatographic behavior of an RP/AEX stationary phase was evaluated. Residual silanol groups not only caused additional electrostatic interactions for acidic analytes, but also competed with the analytes for the anion-exchange sites in an RP/AEX stationary phase. The effects of different salt-containing mobile-phase systems on the analyte-retention behavior of Sil-PBQA were investigated to develop a method that enhanced the repeatability of the RP/AEX acidic-analyte-analysis results obtained using Sil-PBQA and facilitated the separation of nonsteroidal anti-inflammatory drugs on Sil-PBQA. The ideas presented in this paper can improve the separation of peaks and repeatability of results in the RP/AEX analysis of acidic drugs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

To avoid the weakness (lower adsorption rate and selectivity) of peach gum polysaccharide (PGP) and improve the adsorption performance of polyacrylamide (PAAm) hydrogel (lower adsorption capacity), in the present work, the PGP was chemically tailored to afford ammoniated PGP (APGP) and quaternized PGP (QPGP), and attapulgite (ATP) was bi-functionalized with cation groups and carbon‑carbon double bond. Then, PAAm/APGP and PAAm/QPGP/ATP hydrogels were synthesized via redox polymerization. The synthesis procedure and properties of hydrogels were traced by FTIR, SEM, XPS, TGA, TEM, and BET methods, and the dye adsorption performance of the hydrogels was evaluated using the new coccine (NC) and tartrazine (TTZ) aqueous solutions as the model anionic dyes. Effects of initial dye concentration, pH, and ionic strength on the adsorption were investigated. Compared with PAAm/APGP hydrogel, PAAm/APGP/ATP hydrogel exhibits higher adsorption rate, superior adsorption capacity, stability, and selectivity towards anionic dye. The adsorption process of PAAm/QPGP/ATP hydrogel reached equilibrium in about 20 min and followed the pseudo-second-order kinetic model and Langmuir isotherm. The adsorption capacities towards NC and TTZ of PAAm/QPGP/ATP hydrogel were calculated as 873.235 and 731.432 mg/g. This hydrogel adsorbent originating from PAAm, PGP, and ATP shows great promise for application in practical water treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Herein, the effects of anionic xanthan gum (XG), neutral guar gum (GG), and neutral konjac glucomannan (KGM) on the dissolution, physicochemical properties, and emulsion stabilization ability of soy protein isolate (SPI)-polysaccharide conjugates were studied. The SPI-polysaccharide conjugates had better water dissolution than the insoluble SPI. Compared with SPI, SPI-polysaccharide conjugates had lower β-sheet (39.6 %-56.4 % vs. 47.3 %) and α-helix (13.0 %-13.2 % vs. 22.6 %) percentages, and higher β-turn (23.8 %-26.5 % vs. 11.0 %) percentages. The creaming stability of SPI-polysaccharide conjugate-stabilized fish oil-loaded emulsions mainly depended on polysaccharide type: SPI-XG (Creaming index: 0) > SPI-GG (Creaming index: 8.1 %-21.2 %) > SPI-KGM (18.1 %-40.4 %). In addition, it also depended on the SPI preparation concentrations, glycation times, and glycation pH. The modification by anionic XG induced no obvious emulsion creaming even after 14-day storage, which suggested that anionic polysaccharide might be the best polysaccharide to modify SPI for emulsion stabilization. This work provided useful information to modify insoluble proteins by polysaccharides for potential application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)