Search

The Villa Victoria dam is one of the most important storage reservoirs in Mexico since it distributes water to more than 20 million inhabitants in the Metropolitan Zone of Mexico City. In this dam, the common carp (Cyprinus carpio) is an important food resource for the inhabitants, so the aim of this work was to evaluate the oxidative damage (lipoperoxidation, oxidized proteins, antioxidant enzymes activity and gene expression), AChE, embryotoxicity and behavioral changes in C. carpio embryos and larvae exposed to water from Villa Victoria dam for 24, 48, 72 and 96 h. The embryotoxicity was evaluated trough the General Morphology Score (GMS) and the teratogenic index. Behavioral changes in basal locomotor activity and thigmotaxis were evaluated in a DanioVision, Noldus ™. An increase in lipid and protein oxidation as well as modification of CAT, SOD and GPx enzymatic activity was observed during the exposure times. The GMS indicated a low development in the embryos, the teratogenic index was less than 1, however teratogenic effects as yolk edema, fin malformation, head malformation and scoliosis were observed. In parallel, an increase in AChE activity and gene expression was observed reflecting changes in distance traveled of the basal locomotor activity and thigmotaxis at the sampling points. In conclusion, pollutants in water from Villa Victoria dam caused oxidative damage, changes in SOD, CAT, GPx and AChE activity as well as embryotoxicity and modifications in the behavior of C. carpio larvae. This study demonstrates the need to implement restoration programs for this reservoir since, contamination in the Villa Victoria dam could eventually endanger aquatic life and human health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The Folin-Ciocalteu method can be considered to be the most widely used in laboratories around the world, to quantify the total polyphenols content. Many different variations found in this assay have been reported in the scientific literature. In this review, the full experimental conditions influencing the Folin-Ciocalteu assay have been comparatively assessed and discussed. Furthermore, few studies relating to the method validation have been evaluated according to the results of selectivity, linearity, precision, trueness, limit of determination, limit of quantification and robustness. In general, the results derived from the reviewed literature are widely variable according to both, the experimental factors selected and the performance parameters reported, making difficult the comparison of the overall results published., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study shows, for the first time, how the natural biodegradation of the Phaeophyceae Rugulopteryx okamurae (R.o.) affects its methane yield, by biochemical methane potential assays, and the methane production kinetics. Additionally, a mechanical (zeolite-assisted milling) and a thermal (120 °C, 45 min) pretreatments were assessed. The highest methane yield was obtained from the mechanically pretreated fresh ashore biomass (219 (15) NL CH4 kg VS ), which presents the use of zeolite during milling as an economical alternative for heavy metal toxicity reduction. Moreover, no significant differences were observed between the other tests (with the exception of the lowest value obtained for the mechanically pretreated fresh R.o.). Low methane yields were linked to the heavy metal content. However, an increase of 28.5 % and 20.0 % in the k value was found for the untreated fresh R.o. biomass and fresh ashore biomass, respectively, when subjected to thermal pretreatment. Finally, an enhancement of 80.5 % in the maximum methane production rate was obtained for the fresh ashore biomass milled with zeolite compared to the untreated fresh ashore biomass.-1 ), which presents the use of zeolite during milling as an economical alternative for heavy metal toxicity reduction. Moreover, no significant differences were observed between the other tests (with the exception of the lowest value obtained for the mechanically pretreated fresh R.o.). Low methane yields were linked to the heavy metal content. However, an increase of 28.5 % and 20.0 % in the k value was found for the untreated fresh R.o. biomass and fresh ashore biomass, respectively, when subjected to thermal pretreatment. Finally, an enhancement of 80.5 % in the maximum methane production rate was obtained for the fresh ashore biomass milled with zeolite compared to the untreated fresh ashore biomass., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

This study evaluated the influence of the TiO 2 nanoparticles (NPs) on the mechanical and chemical performance of Sn and Sn-Ag alloys. The XRD (X-ray diffraction) and HR-TEM (high resolution-transmission electron microscopy) methods were used to characterize the NPs synthesized by the sol-gel microwave process. The chemical composition of the alloys was Sn, Sn+3TiO 2 NPs, Sn-5Ag+1.5TiO 2 NPs, Sn-10Ag, and Sn-10Ag+3TiO 2 NPs, obtained from an experimental factorial design (EFD). A statistical model was used to determine the mechanical and chemical properties, showing the Vickers hardness response surface, tensile strength, wear, and corrosion resistance. The wear and corrosion tests for the various alloy compositions were performed using human artificial saliva solution. The results indicated that the Sn-10Ag+3TiO 2 NPs exhibited the highest mechanical performance due to their increased hardness (380 HV), tensile strength (370 N), and wear resistance (0.34 × 10 -3 mm 3 Nm -1 ); in all the cases, the inclusion of TiO 2 NPs enhanced the corrosion resistance of the alloys. According to the American Dental Association (ADA), Sn-10Ag+3TiO 2 NPs alloy could be classified as a possible type IV restorative material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The invasive alien seaweed Rugulopteryx okamurae (R.o.) has spread quickly through the Mediterranean Sea causing an unprecedented ecological impact. A solution integrated into a circular economy model is needed in order to curb the negative effects of its presence. Anaerobic digestion (AD) is proposed as a feasible process able to transform biomass into renewable energy. Nevertheless, in order to improve the methane yield and surpass the drawbacks associated with AD processes, this research proposes a thermal pretreatment and a new developed method where the macroalgae is mechanically pretreated with zeolite. Chemical and microstructure characterization of the algal biomass after pretreatments involved scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The highest methane yields of 240 (28) and 250 (20) NL CH4 kg -1 VS added were obtained with the new mechanical pretreatment and the thermal pretreatment at 120 °C for 45 min without zeolite, achieving a 35 % improvement against the non-pretreated algae. A direct relationship between the crystallinity index of the samples and methane production was observed. The experimental data of methane production versus time were found to be in accordance with both first-order kinetic and Transference Function mathematical models., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The principal by-product from the two-phase olive oil production process is olive mill solid waste (OMSW). It is a highly-pollutant by-product, not only because of its characteristics, but also because of the considerable volume of OMSW which is generated, amounting to 2 to 4 million tons per year in Spain. The anaerobic digestion of this by-product is a well-studied process, and results in the generation of biogas, methane and carbon dioxide mainly of high calorific values (20-25 MJ m -3 ), and an effluent or digestate. The digestate of this by-product has never been characterized. This study presents an informative view on how the composition of OMSW digestate shows promising implications as a soil amendment or fertilizer due to the quality of the biomass from Lolium rigidum, a useful grass specie for the production of forage. Three OMSW digestate alternative applications or treatments were investigated: the digestate and the solid fraction of the digestate for a nutrient-poor soil amendment and the liquid fraction of the digestate as fertilizer. The results confirm that all the OMSW digestate treatments studied presented suitable characteristics for agricultural use, and showed an optimal Carbon/Nitrogen ratio with adequate values for heavy metals which are below the limits established by the Spanish and European legislation in the absence of pathogens. However, fertirrigation was the treatment that provided Lolium rigidum with the best characteristics, improving its shoot biomass, photosynthetic rate and nutritional content., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Pharmaceuticals are used for the prevention or treatment of diseases, and due to their manufacturing process they are continuously released to water bodies. One of the pharmacological groups detected in aquatic environments is non-steroidal anti-inflammatory drugs (NSAIDs) at trace concentrations. This study evaluated the survival and malformation rate in oocytes and larvae of Cyprinus carpio (C. carpio) after exposure to different proportions of an industrial effluent. Initially, the industrial effluent was sampled from an NSAID manufacturing plant located in the city of Toluca, State of Mexico, subsequently the physicochemical characterization and determination of the concentration of chemical compounds present were carried out. On the other hand, the lethal concentration 50 (LC50) and the effective concentration 50 (EC50) were calculated to determine the teratogenic index (TI), as well as the alterations to the embryonic development and the teratogenic effects on oocytes and larvae of C. carpio at the following proportions of the industrial effluent: 0.1, 0.3, 0.5, 0.7, 0.9 and 1.1%, following the Test Guideline 236, which describes a Fish Embryo Acute Toxicity test, the exposure times were 12, 24, 48, 72 and 96 h post-fertilization. The contaminants detected were NaClO (2.6 mg L -1 ) and NSAIDs such as diclofenac, ibuprofen, naproxen and paracetamol in the range of 1.09-2.68 mg L -1 . In this study the LC50 was 0.275%, the EC50 0.133% and the TI 2.068. Several malformations were observed in all proportions of the industrial effluent evaluated, however the most severe such as spina bifida and paravertebral hemorrhage were observed at the highest effluent proportion. The industrial effluent evaluated in this study represents a risk for organisms that are in contact with it, since it contains chemical compounds that induce embryotoxic and teratogenic effects as observed in oocytes and larvae of C. carpio., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Heavy metal ions (HMIs) are serious threats to the environment. Sub-critical water treatment was used to mimic contamination of squid oil in aqueous, metal-soap and oil phases. Isothermal adsorption of HMIs (Cu 2+ , Pb 2+ , Cd 2+ and Zn 2+ ) was studied from aqueous phase to oil phase (493, 523, 548, and 573K) for solutions with different initial concentration of HMIs was studied. Decomposition of glycerides into fatty acids was favored at high subcritical temperatures, with metal-soap phase showing the highest chelation ability toward Cu 2+ (96%, isotherm 573K). The removal-ability of HMIs from contaminated oil was performed by CR11 chelate ion exchanger, showing facilitated removal from metal-soap and oil phases at low temperatures compared to general-purpose PEI-chitosan bead and PEI-chitosan fiber sorbents. The chelation behavior of Pb 2+ and Cd 2+ was the same in the OIL, with maximum values of 5.7×10 -3 (mol/l) and 5.0×10 -3 (mol/l) at 573K, respectively. By contrast, concentration of Zn 2+ ion showed a slight increase with increasing temperature due to electrostatic forces between Zn 2+ and active sites of glycerides in oil phase. For oil solution, the selectivity of adsorption for CR11, especially for Zn 2+ , was at least five-fold larger compared to PEI-chitosan bead and PEI-chitosan fiber adsorbents., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Metals such as Al, Fe and Hg are used in diverse anthropogenic activities. Their presence in water bodies is due mainly to domestic, agricultural and industrial wastewater discharges and constitutes a hazard for the organisms inhabiting these environments. The present study aimed to evaluate geno- and cytotoxicity induced by Al, Fe, Hg and the mixture of these metals on blood of the common carp Cyprinus carpio. Specimens were exposed to the permissible limits in water for human use and consumption according to the pertinent official Mexican norm [official Mexican norm NOM-127-SSA1-1994] Al (0.2mgL -1 ), Fe (0.3mgL -1 ), Hg (0.001mgL -1 ) and their mixture for 12, 24, 48, 72 and 96h. Biomarkers of genotoxicity (comet assay and micronucleus test) and cytotoxicity (caspase-3 activity and TUNEL assay) were evaluated. Significant increases relative to the control group (p<0.05) were observed in all biomarkers at all exposure times in all test systems; however, damage was greater when the metals were present as a mixture. Furthermore, correlations between metal concentrations and biomarkers of geno- and cytotoxicity were found only at certain exposure times. In conclusion, Al, Fe, Hg and the mixture of these metals induce geno- and cytotoxicity on blood of C. carpio., (Copyright © 2016 Elsevier Inc. All rights reserved.)

The performance parameters of volatile fatty acids (VFAs) measurements were assessed for the first time by a multi-laboratory validation study among 13 laboratories. Two chromatographic techniques (GC and HPLC) and two quantification methods such as external and internal standard (ESTD/ISTD) were combined in three different methodologies GC/ESTD, HPLC/ESTD and GC/ISTD. Linearity evaluation of the calibration functions in a wide concentration range (10-1000mg/L) was carried out using different statistical parameters for the goodness of fit. Both chromatographic techniques were considered similarly accurate. The use of GC/ISTD, despite showing similar analytical performance to the other methodologies, can be considered useful for the harmonization of VFAs analytical methodology taking into account the normalization of slope values used for the calculation of VFAs concentrations. Acceptance criteria for VFAs performance parameters of the multi-laboratory validation study should be established as follows: (1) instrument precision (RSDINST≤1.5%); (2) linearity (R(2)≥0.998; RSDSENSITIVITY≤4%; REMAX≤8%; REAVER≤ 3%); (3) precision (RSD≤1.5%); (4) trueness (recovery of 97-103%); (5) LOD (≤3mg/L); and (6) LOQ (10mg/L)., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In 2008, the first Proficiency Testing Scheme of Chemical Oxygen Demand (1(st)COD-PT(ADG)) was conducted to assess the results obtained for different research groups whose field work is mainly anaerobic digestion. This study was performed using four samples, two solid samples as raw materials and two solid samples to prepare high concentration suspended solid solutions. Invitations were sent to a large number of laboratories, mainly to anaerobic digestion research groups. Finally, thirty labs from sixteen countries agreed to participate, but for different reasons four participants could not send any data. In total, twenty-six results were reported to the COD-PT coordinator. This study showed the importance of continuous participation in proficiency testing (PT) schemes in order to compare the results obtained. Taking into account the lack of a general standard method and high quality certified reference materials (CRMs), the traceability of COD determination is not currently easy to check. In addition, the spread of participants' results obtained was high and pointed to the advisability of using consensus values due to their unreliability. Therefore, the theoretical oxygen demand (ThOD) values were considered as assigned values for all the samples analysed. On the other hand, in this PT the established standard deviation (ESD) has been determined by the Horwitz modified function. Participants of this 1(st)COD-PT(ADG) were asked to give a short report on the analytical method used. Although all the participants used potassium dichromate as their oxidant reagent, their experimental procedures were very different. With the purpose of comparing the results obtained, the different experimental conditions used were classified into five methods, corresponding to two main categories, open and closed reflux. The performance of laboratories was expressed by the z-score, whose value is considered satisfactory when z-score

The adsorption of methylene blue (MB) on three commercial granular activated carbons (GACs), 12 x 40 mesh size, namely Filtrasorb 400, Norit and Picacarb has been researched. A comparative study of adsorptive capacity using the proposed single-point test and the traditional multi-point isotherm test was carried out. For the single-point test, the influence of some parameters such as MB/GACs mass ratio and contact time were evaluated. For this test the adsorptive capacities of the three GACs studied were 319+/-14, 280+/-7 and 260+/-6 mg g(-1) for Filtrasorb 400, Norit and Picacarb, respectively. For multi-point isotherm adsorption test the Langmuir model was used. The parameters involved were obtained by linear and non-linear regression methods. The maximum adsorptive capacity values obtained for both methods were similar and statistically not different than those obtained with the single-point tests. This experimental work also aimed at establishing a relationship between the adsorbent particle size and the adsorptive capacity which could be used complementarily to evaluate the quality of GACs as adsorbents. For a mean particle diameter of 1mm and after 24h of contact time the adsorptive capacity values were 255+/-7, 222+/-7 and 160+/-7 mg g(-1) for Filtrasorb 400, Norit and Picacarb, respectively.

Four alternatives (runs A, B, C and D) for heavy metals removal (Fe, Cu, Zn and Al) from acid mine drainage water (AMDW) produced in the mining areas of the Huelva Province, Spain, were evaluated. In run A, the anaerobic effluent from the treatment of acid mine drainage water (cheese whey added as a source of carbon) was mixed with the raw AMDW. The pH increased to 3.5 with the addition of KOH. In run B, biogas with around 30% of hydrogen sulphide obtained in the anaerobic reactor was sparged to the mixture obtained in run A, but in this case at a pH of 5.5. In run C, the pH of the raw AMDW was increased to 3.5 by the addition of KOH solution. Finally, in run D, the pH of the raw AMDW was increased to 5.5 by the addition of KOH solution and further biogas was sparged under the same conditions as in run A. It was found that heavy metal removal was a function of pH. At a pH of 3.5 most of the iron was removed while Zn and Cu were partially removed. At a pH of 5.5 the removal of all metals increased considerably. The best results were obtained in run B where the percentages of removal of Fe, Cu, Zn and Al achieved values of 91.3, 96.1, 79.0 and 99.0%, respectively. According to the experimental results obtained tentative schemas of the flow diagram of the processes were proposed.

A modified approach to determine the chemical oxygen demand (COD) of solid substrates based on the DIN 38414-S9 standard method is proposed. The adapted procedure is assessed and compared with standard methods widely used for water and wastewater such as the American Public Health Association-American Water Works Association-Water Pollution Control Federation (APHA-AWWA-WPCF) standard methods 5220 B-open reflux (SM-OR) and 5220 D-closed reflux colorimetric (SM-CR). Solutions with high suspended concentration of solids, as well as digestates from an anaerobic reactor, were used during the comparative test. For solid substrates, the COD recovery was about 100% when the proposed method was used. For solutions with solid content higher than 20 g TS L(-1), the recovery was only completed when the proposed method was used, showing that the methods traditionally employed are not very appropriate for samples with the described characteristics. For instance, percentages of COD recovery in the ranges of 77.3-87.1% and 89.4-94.1% were achieved when the SM-OR and SM-CR methods were used, respectively.