Search

While there has been significant research conducted on bacterial colonization on implant materials, with a focus on developing surface modifications to prevent the formation of bacterial biofilms, the study of Candida albicans biofilms on implantable materials is still in its infancy, despite its growing relevance in implant-associated infections. C. albicans fungal infections represent a significant clinical concern due to their severity and associated high fatality rate. Pathogenic yeasts account for an increasing proportion of implant-associated infections, since Candida spp. readily form biofilms on medical and dental device surfaces. In addition, these biofilms are highly antifungal-resistant, making it crucial to explore alternative solutions for the prevention of Candida implant-associated infections. One promising approach is to modify the surface properties of the implant, such as the wettability and topography of these substrata, to prevent the initial Candida attachment to the surface. This review summarizes recent research on the effects of surface wettability, roughness, and architecture on Candida spp. attachment to implantable materials. The nanofabrication of material surfaces are highlighted as a potential method for the prevention of Candida spp. attachment and biofilm formation on medical implant materials. Understanding the mechanisms by which Candida spp. attach to surfaces will allow such surfaces to be designed such that the incidence and severity of Candida infections in patients can be significantly reduced. Most importantly, this approach could also substantially reduce the need to use antifungals for the prevention and treatment of these infections, thereby playing a crucial role in minimizing the possibility contributing to instances of antimicrobial resistance. STATEMENT OF SIGNIFICANCE: In this review we provide a systematic analysis of the role that surface characteristics, such as wettability, roughness, topography and architecture, play on the extent of C. albicans cells attachment that will occur on biomaterial surfaces. We show that exploiting bioinspired surfaces could significantly contribute to the prevention of antimicrobial resistance to antifungal and chemical-based preventive measures. By reducing the attachment and growth of C. albicans cells using surface structure approaches, we can decrease the need for antifungals, which are conventionally used to treat such infections., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The wings of insects such as cicadas and dragonflies have been found to possess nanostructure arrays that are assembled from fatty acids. These arrays can physically interact with the bacterial cell membranes, leading to the death of the cell. Such mechanobactericidal surfaces are of significant interest, as they can kill bacteria without the need for antibacterial chemicals. Here, we report on the bactericidal effect of two of the main lipid components of the insect wing epicuticle, palmitic (C16) and stearic (C18) fatty acids. Films of these fatty acids were re-crystallised on the surface of highly ordered pyrolytic graphite. It appeared that the presence of two additional CH 2 groups in the alkyl chain resulted in the formation of different surface structures. Scanning electron microscopy and atomic force microscopy showed that the palmitic acid microcrystallites were more asymmetric than those of the stearic acid, where the palmitic acid microcrystallites were observed to be an angular abutment in the scanning electron micrographs. The principal differences between the two types of long-chain saturated fatty acid crystallites were the larger density of peaks in the upper contact plane of the palmitic acid crystallites, as well as their greater proportion of asymmetrical shapes, in comparison to that of the stearic acid film. These two parameters might contribute to higher bactericidal activity on surfaces derived from palmitic acid. Both the palmitic and stearic acid crystallite surfaces displayed activity against Gram-negative, rod-shaped Pseudomonas aeruginosa and Gram-positive, spherical Staphylococcus aureus cells. These microcrystallite interfaces might be a useful tool in the fabrication of effective bactericidal nanocoatings., Statement of Significance: Nanostructured cicada and dragonfly wing surfaces have been discovered to be able physically kill bacterial cells. Here, we report on the successful fabrication of bactericidal three-dimensional structures of two main lipid components of the epicuticle of insect wings, palmitic (C16) and stearic (C18) acids. After crystallisation onto highly ordered pyrolytic graphite, both the palmitic and stearic acid films displayed bactericidal activity against both Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus cells. The simplicity of the production of these microcrystallite interfaces suggests that a fabrication technique, based on solution deposition, could be an effective technique for the application of bactericidal nanocoatings., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

A combination of eCG (400 IU) and hCG (200 IU) (P.G. 600; Merck Animal Health, Summit, NJ, USA) stimulates puberty in gilts, but variation in the estrual response exists among farms. We hypothesized that some of the variability is a consequence of gilts that have commenced cycling being inadvertently treated. The objective of experiment 1 was to determine the effect of intramuscular (im) P.G. 600 on estrous cycles in sexually mature gilts. Gilts in treatment 1 (n = 16) received P.G. 600 at the onset of daily boar exposure. Gilts in treatments 2 to 5 (n = 16 per treatment) were allowed to express a natural first estrus and were then treated with P.G. 600 during the first estrous cycle as follows: treatment 2 at Day 6, treatment 3 at Day 12, and treatment 4 at Day 18 of the estrous cycle. Treatment 5 gilts received no P.G. 600. The proportion of gilts displaying a normal estrous cycle (18-24 days) was greater (P < 0.05) for treatments 4 (100%) and 5 (100%) compared with treatments 1 (73.3%) and 3 (60%), with treatment 2 having a value (87.5%) that was not different from the other groups. For treatment 3, 33% of gilts displayed an increased interestrus interval that averaged 32.5 days. Concentrations of progesterone remained elevated 20 days after the onset of first estrus in treatment 3 gilts, which supports the concept that P.G. 600 administered at Day 12 of the estrous cycle induced follicular growth, ovulation, and formation of CL that functioned for approximately 15 days, increasing the length of the estrous cycle. It is common for swine producers to have groups of replacement gilts that include both cycling and prepubertal animals, or individuals, the cycling status of which is unknown. The objective of experiment 2 was to evaluate a system using a combination of a progestogen (Matrix; Merck Animal Health) and P.G. 600 to synchronize estrus in replacement gilts. Crossbred gilts, assumed to be a mix of cycling and prepubertal females, were allocated to one of four treatments (n = 12 per treatment): treatment 1, Matrix (15 mg/day) fed for 14 days and im P.G. 600 24 hours after the last feeding of Matrix; treatment 2, Matrix for 7 days and P.G. 600; treatment 3, P.G. 600 only; and treatment 4, im water only. The percentage of gilts in estrus within 7 days after im treatment was the greatest (P < 0.02) and days to estrus the least (P < 0.05) for gilts receiving Matrix for 14 days and P.G. 600 (treatment 1, 91.7% and 5.4 ± 1.9 days; treatment 2, 50% and 9.2 ± 2.0 days; treatment 3, 33% and 13.8 ± 2.1 days; and treatment 4, 50% and 9.1 ± 1.9 days). The results of these experiments suggest that P.G. 600 administered to gilts that have already obtained puberty may cause abnormal estrous cycles and demonstrate to swine producers the need to correctly classify replacement gilts as prepubertal or cycling before administering the product. The use of Matrix and P.G. 600 in combination has potential as an effective strategy for synchronizing estrus in a mix of prepubertal and mature, cycling gilts., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Since the description of the 'Lotus Effect' by Barthlott and Neinhuis in 1997, the existence of superhydrophobic surfaces in the natural world has become common knowledge. Superhydrophobicity is associated with a number of possible evolutionary benefits that may be bestowed upon an organism, ranging from the ease of dewetting of their surfaces and therefore prevention of encumbrance by water droplets, self-cleaning and removal of particulates and potential pathogens, and even to antimicrobial activity. The superhydrophobic properties of natural surfaces have been attributed to the presence of hierarchical microscale (>1 μm) and nanoscale (typically below 200 nm) structures on the surface, and as a result, the generation of topographical hierarchy is usually considered of high importance in the fabrication of synthetic superhydrophobic surfaces. When one surveys the breadth of data available on naturally existing superhydrophobic surfaces, however, it can be observed that topographical hierarchy is not present on all naturally superhydrophobic surfaces; in fact, the only universal feature of these surfaces is the presence of a sophisticated nanoscale structure. Additionally, several natural surfaces, e.g. those present on rose petals and gecko feet, display high water contact angles and high adhesion of droplets, due to the pinning effect. These surfaces are not truly superhydrophobic, and lack significant degrees of nanoscale roughness. Here, we discuss the phenomena of superhydrophobicity and pseudo-superhydrophobicity in nature, and present an argument that while hierarchical surface roughness may aid in the stability of the superhydrophobic effect, it is nanoscale surface architecture alone that is the true determinant of superhydrophobicity., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Numerous natural surfaces possess superhydrophobicity and self-cleaning properties that would be extremely beneficial when applied in industry. Dragonfly wings are one example of such surfaces, and while their general surface structure is known, their precise chemical composition is not. Here, the epicuticular lipids of dragonfly wing membranes were characterized to investigate their significance in contributing to self-cleaning and superhydrophobic properties. After just 10s of lipid extraction using chloroform, the water contact angles exhibited by the wings decreased below the accepted threshold for superhydrophobicity (150°). Infrared spectra collected at the Australian Synchrotron contained characteristic absorption bands of amide, ester and aliphatic hydrocarbons moieties on the wing surfaces, the latter of which was decreased post-extraction with chloroform. GC-MS data analysis revealed that the epicuticular wax components were dominated by n-alkanes with even-numbered carbons, especially n-hexacosane, and palmitic acid. SEM and AFM data analysis conducted on the untreated and chloroform-extracted wing surfaces demonstrated that surface topography changed after extraction; the surface nanostructure was progressively lost with extended extraction times. The data presented here indicate that epicuticular lipids contribute not only to self-cleaning and superhydrophobic properties through their inherent hydrophobic nature, but also by forming the physical structure of the wing surface. This knowledge will be extremely valuable for reconstruction of dragonfly wing structures as a biomimetic template., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Substratum surface roughness is known to be one of the key factors in determining the extent of bacterial colonization. Understanding the way by which the substratum topography, especially at the nanoscale, mediates bacterial attachment remains ambiguous at best, despite the volume of work available on the topic. This is because the vast majority of bacterial attachment studies do not perform comprehensive topographical characterization analyses, and typically consider roughness parameters that describe only one aspect of the surface topography. The most commonly reported surface roughness parameters are average and root mean square (RMS) roughness (R(a) and R(q) respectively), which are both measures of the typical height variation of the surface. They offer no insights into the spatial distribution or shape of the surface features. Here, a brief overview of the current state of research on topography-mediated bacterial adhesion is presented, as well as an outline of the suite of roughness characterization parameters that are available for the comprehensive description of the surface architecture of a substratum. Finally, a set of topographical parameters is proposed as a new standard for surface roughness characterization in bacterial adhesion studies to improve the likelihood of identifying direct relationships between substratum topography and the extent of bacterial adhesion., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Despite many synthetic biomaterials having physical properties that are comparable or even superior to those of natural body tissues, they frequently fail due to the adverse physiological reactions they cause within the human body, such as infection and inflammation. The surface modification of biomaterials is an economical and effective method by which biocompatibility and biofunctionality can be achieved while preserving the favorable bulk characteristics of the biomaterial, such as strength and inertness. Amongst the numerous surface modification techniques available, plasma surface modification affords device manufacturers a flexible and environmentally friendly process that enables tailoring of the surface morphology, structure, composition, and properties of the material to a specific need. There are a vast range of possible applications of plasma modification in biomaterial applications, however, the focus of this review paper is on processes that can be used to develop surface morphologies and chemical structures for the prevention of adhesion and proliferation of pathogenic bacteria on the surfaces of in-dwelling medical devices. As such, the fundamental principles of bacterial cell attachment and biofilm formation are also discussed. Functional organic plasma polymerised coatings are also discussed for their potential as biosensitive interfaces, connecting inorganic/metallic electronic devices with their physiological environments., (Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)