Search

The aim of this study was to fabricate and characterize biodegradable polycaprolactone fumarate(PCLF)/gelatin-based nanocomposite incorporated with the 0, 5 and 10 wt% silicon and magnesium co-doped fluorapatite nanoparticles (Si-Mg-FA) membranes using electrospinning process for guided bone regeneration (GBR) and guided tissue regeneration (GTR) applications. Results demonstrated the formation of randomly-oriented and defect-free fibers with various fiber sizes depending on the Si-Mg-FA content. Moreover, incorporation of 5 wt% Si-Mg-FA significantly improved the mechanical strength (1.5times) compared to the mechanical strength of PCLF/gelatin membrane and nanocomposite with 10 wt% nanoparticles. There was no clear difference between degradation rate of PCLF/gelatin and PCLF/gelatin with 5 wt% nanoparticles at 7, 14 and 28 days of immersion in phosphate buffer saline while 10 wt% nanoparticles significantly increased biodegradation of PCLF/gelatin, and no cytotoxic effect of membranes was seen. Finally, scanning electron microscopy (SEM) micrographs of fibroblast cells cultured on the samples demonstrated that the cells were completely attached and spread on the surface of nanocomposites. In summary, PCLF/gelatin membranes consisting of 5 wt% Si-Mg-FA nanoparticles could provide appropriate mechanical and biological properties and fairly good degradation rate, making it appropriate for GTR/GBR applications., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this work, cobalt-based alloy/nano bioactive glass (NBG) composites with 10, 15 and 20wt% NBG were prepared and their bioactivity after immersion in simulated body fluid (SBF) for 1 to 4weeks was studied. Scanning electron microscopy images of two- step sintered composites revealed relatively dense microstructure. The results showed that density of composite samples decreased with increase in NBG amount. The microstructure analysis as well as energy dispersive X-ray analysis (EDX) revealed that small amount of calcium phosphate phases precipitates on the surface of composite samples after 1week immersion in SBF. After 2weeks immersion, considerable amounts of cauliflower-like shaped precipitations were seen on the surface of the composites. Based on EDX analysis, these precipitations were composed mainly from Ca, P and Si. The observed bands in the Fourier transform infrared spectroscopy of immersed composites samples for 4weeks in SBF, were characteristic bands of hydroxyapatite. Therefore it is possible to form hydroxyapatite layer on the surface of composite samples during immersion in SBF. The results indicated that prepared composites unlike cobalt-based alloy are bioactive, promising their possibility for implant applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The aim of this work was preparation, characterization, bioactivity and biocompatibility evaluation of Mg-substituted fluorapatite (Mg-FA) nanopowders. Mg-FA nanopowders with a chemical composition of Ca10-xMgx(PO4)6F2, with x=0, 0.5, 1, and 2 were prepared by mechanically activated method. The in vitro bioactivity was investigated by soaking the powders in simulated body fluid (SBF) for various time periods to analyze the nucleation and growth of bone-like apatite on the surface of the samples. Cell viability and cell attachment were studied by MTT assay. Results indicated that the bioactivity of all of samples with different Mg content was improved compared with the pure FA. However, the mechanism of bioactivity is different and depends on the amount of Mg substitution. Finally, cell culture suggested that the addition of Mg(2+) has no adverse effect and Mg-FA samples have good biocompatibility. The Mg-FA material shows potential in satisfying the requirements of biomedical applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This study was conducted to evaluate the effects of dietary pomegranate seed pulp (PSP) on meat color and lipid stability of kids. Thirty-two Mahabadi male kids were randomly assigned to one of four diets with different levels of PSP: 1 - diet without PSP (Control), 2 - diet containing 5% PSP (PSP5), 3 - diet containing 10% PSP (PSP10), and 4 - diet containing 15% PSP (PSP15). The kids were slaughtered at the end of the study and m. longissimus lumborum (LL) was sampled. The TBARS values of both raw and cooked meat were decreased (P<0.0001) by increasing levels of PSP in the diet. The meat of kids fed PSP15 showed higher a* and C* values (P<0.01) and lower H* and b* values (P<0.001), than kids fed with Control diet. The results of this experiment indicated that replacing barley and corn grains with PSP in the diet may improve the color and lipid stability of kid meat., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The goal of the present research was to fabricate, characterize, and evaluate mechanical and biological properties of Co-base alloy composites with different amounts of hydroxyapatite (HA) nanopowder reinforcement. The powder of Co-Cr-Mo alloy was mixed with different amounts of HA by ball milling and it was then cold pressed and sintered. X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were used. Microhardness measurement and compressive tests were also carried out. Bioactivity behavior was evaluated in simulated body fluid (SBF). A significant decrease in modulus elasticity and an increase in microhardness of the sintered composites were observed. Apatite formation on the surface of the composites showed that it could successfully convert bioinert Co-Cr-Mo alloy to bioactive type by adding 10, 15, and 20wt.% HA which have lower modulus elasticity and higher microhardness., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The aim of the present work was twofold: to prepare biphasic magnesium fluorapatite (MFA) composites with different amounts of alumina using a two-step sintering process, and to evaluate the effects of various amounts of alumina on the mechanical properties, phase stability, and densification of the composite samples. Initially, MFA powders were prepared with different amounts of alumina by mechanical activation and the MFA composite samples were subsequently prepared using the two-step sintering (TSS) method. In order to determine the appropriate temperature of the first step sintering, conventional sintering of MFA/50% alumina was carried out at temperatures in the range of 1000-1300°C. X-ray diffraction and scanning electron microscopy (SEM) techniques were used to characterize the prepared MFA/alumina composites. The results showed fracture toughness and hardness in the MFA/50% alumina composite samples to increase as a result of alumina addition to their maximum values of 5.82±1.05MPam(1/2) and 22.09±3.5GPa, respectively., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Composite scaffolds consisting of polymers reinforced with ceramic nanoparticles are widely applied for hard tissue engineering. However, due to the incompatible polarity of ceramic nanoparticles with polymers, they tend to agglomerate in the polymer matrix which results in undesirable effects on the integral properties of composites. In this research, forsterite (Mg2SiO4) nanoparticles was surface esterified by dodecyl alcohol and nanofibrous poly(ε-caprolactone)(PCL)/modified forsterite scaffolds were developed through electrospinning technique. The aim of this research was to investigate the properties of surface modified forsterite nanopowder and PCL/modified forsterite scaffolds, before and after hydrolytic treatment, as well as the cellular attachment and proliferation. Results demonstrated that surface modification of nanoparticles significantly enhanced the tensile strength and toughness of scaffolds upon 1.5- and 4-folds compared to unmodified samples, respectively, due to improved compatibility between matrix and filler. Hydrolytic treatment of scaffolds also modified the bioactivity and cellular attachment and proliferation due to greatly enhanced hydrophilicity of the forsterite nanoparticles after this process compared to surface modified samples. Results suggested that surface modification of forsterite nanopowder and hydrolytic treatment of the developed scaffolds were effective approaches to address the issues in the formation of composite fibers and resulted in development of bioactive composite scaffolds with ideal mechanical and structural properties for bone tissue engineering applications., (© 2013.)

The ability to mimic the structure of the natural extracellular matrix is a successful key for guided bone regeneration (GBR). For the regeneration of highly organized structures such as heart and bone, aligned fibrous membranes could provide anisotropic mechanical and biological properties which are adequate topographic guidance to cells. Here, novel nanofibrous membranes were developed through electrospinning of PCL-forsterite nanopowder. The membranes were characterized with regard to structural and mechanical properties, degradation, bioactivity and cellular interactive responses. Results showed that optimized nanofibrous composite membrane with significantly improved tensile strength and elastic modules was achieved through addition of 10 wt% forsterite nanopowder into PCL membrane. Addition of forsterite nanopowder decreased the average fiber diameters from 872±361 nm (pure PCL membrane) to 258±159 nm (PCL-10 wt% forsterite membrane). At higher forsterite contents (>10 wt%), the agglomeration of nanoparticles was observed which resulted in reduced mechanical properties. Aligned fibrous membranes revealed smaller fiber sizes and significantly enhanced and anisotropic mechanical properties compared to random ones suggesting that fiber alignment has a profound effect on the structural properties of membranes. Forsterite nanopowder increased the degradation rate showing enhanced hydrophilicity and induced apatite formation in simulated body fluid. Furthermore, composite nanofibrous membranes possessed significantly improved cellular responses in terms of attachment, proliferation and mineralization of pre-osteoblasts compared to PCL membrane. Thus, the currently developed nanofibrous composite membranes embedded in forsterite nanopowder expected to be attractive in GBR membrane applications., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

This work deals with the biocompatibility of dense nano- and micro-structured Hydroxyapatite/Titania composites prepared by two step and conventional sintering, respectively. By application of two step sintering, it was shown that the final grain size of HA-15 wt.% TiO2 is maintained lower than 100 nm while by the application of conventional sintering it reaches higher than 100 nm. Biocompatibility of the dense bulks was evaluated by cell attachment and proliferation experiments. Cell morphology, and viability on each nano- and micro-structured Hydroxyapatite/Titania composites were examined at different time points. The nanostructured HA/Titania dense bulk exhibited higher cell viability than a microstructured one. In addition, the effects of ionic products from nano- and micro-structured bulk dissolution on osteoblasts were studied. The MTT test confirmed that the products from nanostructured HA/Titania dense bulk significantly promoted osteoblast proliferation within a certain concentration range., (Copyright © 2013 Elsevier B.V. All rights reserved.)

This work deals with the fabrication and characterization of nanostructured forsterite bulk. This material may have better biocompatibility and mechanical properties than coarse grain forsterite for the development of bone tissue engineering materials. Nanostructured forsterite bulks were prepared by two step sintering of sol-gel derived forsterite nanopowder. Their sinterability and mechanical properties were then studied. Biocompatibility of the nanostructured forsterite bulk was also evaluated by cell attachment and proliferation experiments. In addition, the effects of ionic products from forsterite nanopowder dissolution on osteoblasts were studied. Results show that dense nanostructured forsterite bulk was prepared with hardness and fracture toughness of about 1102 Hv and 4.3 MPa m(1/2), respectively. Nanostructured forsterite was biocompatible and the MTT test confirmed that the products from forsterite nanopowder dissolution significantly promoted osteoblast proliferation within a certain concentration range. In addition, cells attached to and spread on the surface of nanostructured forsterite bulks. Mechanical properties of the nanostructured forsterite were much higher than that of hydroxyapatite. It was concluded that nanostructured forsterite is a bioactive ceramic with good biocompatibility that can be used as a bone tissue engineering material., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)