Search

Identification of human remains using genetic methods is an important task of forensic science. DNA markers are proving essential in the identification of unknown human remains. However, environmental factors can lead to poor preservation of DNA, including in bone material. The aim of this study was therefore to compare two methods of DNA isolation from bone material: the traditional organic method and the new protocol using the EZ2 Connect instrument. The study involved three types of bone material, namely molars/premolars, petrous parts of the temporal bone and femurs, all with an estimated PMI of 70-80 years. Importantly, the biological material was obtained from three different environments, categorized as preserving, neutral and degrading, based on basic physico-chemical tests and the potential impact on the bone. The results obtained show that the DNA was best preserved in the petrous bone, followed by the teeth, and the femur. DNA extraction using the EZ2 Connect instrument with a new protocol gave slightly better results for the petrous bone, comparable results for the teeth and worse results for the femur compared to the organic method. Several protocol modifications were tested and optimal conditions for DNA isolation were proposed for the EZ2 protocol. Furthermore, the use of an automated method facilitated the effective accumulation of isolates and increased the chances of successful identification of unknown human remains., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Significant variation exists in the molecular structure of compact and trabecular bone. In compact bone full dissolution of the bone powder is required to efficiently release the DNA from hydroxyapatite. In trabecular bone where soft tissues are preserved, we assume that full dissolution of the bone powder is not required to release the DNA from collagen. To investigate this issue, research was performed on 45 Second World War diaphysis (compact bone)-epiphysis (trabecular bone) femur pairs, each processed with a full dissolution (FD) and partial dissolution (PD) extraction method. DNA quality and quantity were assessed using qPCR PowerQuant analyses, and autosomal STRs were typed to confirm the authenticity of isolated DNA. Our results support different mechanisms of DNA preservation in compact and trabecular bone because FD method was more efficient than PD method only in compact bone, and no difference in DNA yield was observed in trabecular bone, showing no need for full dissolution of the bone powder when trabecular bone tissue is processed. In addition, a significant difference in DNA yield was observed between compact and trabecular bone when PD was applied, with more DNA extracted from trabecular bone than compact bone. High suitability of trabecular bone processed with PD method is also supported by the similar quantities of DNA isolated by FD method when applied to both compact and trabecular bone. Additionally similar quantities of DNA were isolated when compact bone was extracted with FD method and trabecular bone was extracted with PD method. Processing trabecular bone with PD method in routine identification of skeletonized human remains shortens the extraction procedure and simplifies the grinding process., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflict of interest., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Hydroxyapatite (HAp) powder was produced from chicken (femur and beak) and fishbone wastes and used as a green adsorbent to decrease Cd 2+ from aqueous media. The HAp powder was generated at 900 °C and characterized using physicochemical techniques. Chicken femur' HAp (16.72 m 2 /g) had a higher surface compared to chicken beak and fishbone ones. The solution pH was the most important parameter in removing Cd 2+ . The highest Cd 2+ removal was achieved at pH 6, temperature of 25 °C, contact time of 80 min, and adsorbent mass of 2 g/L. The Cd 2+ adsorption data fitted well with the quasi-second-order model in kinetics and the Freundlich model in isotherm. The highest adsorption capacity of Cd 2+ using HAp-chicken femur, HAp-fish bone, and HAp-chicken beak was determined 22.94 mg/g, 21.54 mg/g, and 21.45 mg/g, respectively. The Cd 2+ adsorption using HAp powder was a spontaneous and exothermic process and accidental collisions at the liquid-solid interface were reduced. The decrease of Cd 2+ adsorption efficiency was not significant after multiple recovery steps of the desired powders. In addition to Cd 2+ , other parameters of real wastewater (shipbuilding industry) were reduced by the proposed adsorbents. The utilization of hydroxyapatite powder is expected to be a cheap and eco-friendly method for eliminating metals such as Cd 2+ ., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Recovering DNA from modern incinerated bones can be challenging and may require alteration of routine DNA extraction protocols. It has been postulated that incinerated bones share some similarities with ancient bones, including fragmented DNA, surface contamination and highly mineralised structure, all of which can inhibit the successful recovery of genetic material. For this reason, ancient DNA extraction protocols are often used for incinerated modern samples; however, their effectiveness is still somewhat unclear. Much of this uncertainty exists around the demineralisation step of extraction, specifically the length of incubation and retention or removal of supernatant. As obtaining human samples for forensic research can be challenging, porcine models (Sus scrofa domesticus) are often used as substitutes. This study developed real time PCR assays for porcine nuclear DNA in order to investigate the effects of modified demineralisation protocols on DNA yield from femurs exposed to either short (60 min) or prolonged (120 min) burning. Gradient PCR results indicated 56 °C was the ideal amplification temperature for targeted amplicons, with melt curve analysis showing short and long amplicons corresponded to 80.3 °C and 83 °C peaks respectively. Results of altered extraction protocol showed a trend towards higher DNA yields from longer demineralisation periods however this was not significant. By comparison, retaining supernatant post-demineralisation resulted in significantly greater DNA yields compared to discarding it (P < 0.009). Although DNA content yield decreased with burn duration, the demineralisation treatment variations appeared to have the same effect for all burn lengths. These results suggest that for incinerated modern bone retaining the supernatant following demineralisation can dramatically increase DNA yield., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The imprints left by persistent DNA viruses in the tissues can testify to the changes driving virus evolution as well as provide clues on the provenance of modern and ancient humans. However, the history hidden in skeletal remains is practically unknown, as only parvovirus B19 and hepatitis B virus DNA have been detected in hard tissues so far. Here, we investigated the DNA prevalences of 38 viruses in femoral bone of recently deceased individuals. To this end, we used quantitative PCRs and a custom viral targeted enrichment followed by next-generation sequencing. The data was analyzed with a tailor-made bioinformatics pipeline. Our findings revealed bone to be a much richer source of persistent DNA viruses than earlier perceived, discovering ten additional ones, including several members of the herpes- and polyomavirus families, as well as human papillomavirus 31 and torque teno virus. Remarkably, many of the viruses found have oncogenic potential and/or may reactivate in the elderly and immunosuppressed individuals. Thus, their persistence warrants careful evaluation of their clinical significance and impact on bone biology. Our findings open new frontiers for the study of virus evolution from ancient relics as well as provide new tools for the investigation of human skeletal remains in forensic and archaeological contexts., (Copyright © 2020. Published by Elsevier B.V.)

Owing to selection for rapid growth and heavy muscle, bone deformities and injuries in broiler chickens are common and present a welfare concern. Recently, clinical quantitative computed tomography scans (QCTs) have been used for laying hens with significant, strong correlations between QCT-generated bone mineral content (BMC), bone ash, and analytical calcium. The objectives of this study were to determine if QCT-generated bone mineral density of tibias and femurs correlated to fat-free ash and if analytical Ca could be correlated to bone ash and digitally calculated density in immature broilers. Male broilers (Ross 708, n = 125) were raised from day 1 after hatching, and at 42 D, right leg quarters were collected from 50 randomly selected birds and frozen at -20°C until analysis. Leg quarters were scanned with muscle and feathers intact and arranged in rows on plexiglass, and each QCT included a solid Ca hydroxyapatite phantom. Tibias and femurs were removed from leg quarters after autoclaving, ashed, and weighed. Pearson's correlation analysis was conducted to understand the association between analytical bone ash and QCT BMC while paired t tests determined the amount of difference between QCT BMC and ash. Ash weight was strongly correlated to QCT BMC in both the femur (R = 0.86, P < 0.001) and the tibia (R = 0.91, P < 0.001). The average difference between the amount of actual ash weighed and BMC calculated from the QCT was 0.03 ± 0.22 g (P = 0.3) for the femur and 0.04 ± 0.22 g (P = 0.2) for the tibia. This study confirms that this technique can supply invaluable skeletal health information without sacrificing birds., (Copyright © 2020. Published by Elsevier Inc.)

Age prediction can help identify skeletal remains by limiting the search range for a missing person. Although age prediction methods based on odontology and anthropology are frequently used in the forensic field, DNA methylation is particularly promising age-predictive biomarker. In this study, we generated genome-wide DNA methylation profiles of bone samples from 32 identified skeletal remains with an age at death ranging from 31 to 96 years. Only 12 provided more than 800 K quality-filtered CpG methylation values using Illumina's Infinium MethylationEPIC BeadChip array. Methylation ages of the bone samples calculated using a recently developed skin & blood clock composed of 391 CpG sites were found to be very similar to their actual ages (MAD = 6.4 years). However, the low success rate in methylation profiling of bone DNA samples may prevent researchers from applying the array to this type of samples. Therefore, we selected a set of CpG sites that would enable age prediction based on only a few CpG sites in bone DNA samples. Nineteen age-associated CpG marker candidates were selected from 720 K quality-filtered CpG values of 21 male skeletal remain samples. Because age signatures for blood, such as markers on the ELOVL2, FHL2, KLF14 and TRIM59 genes, had showed strong age associations in 12 bone samples, we further tested the age association of the 5 well-known markers in a blood-based model and the 13 out of 19 CpG markers from the array of 21 bone samples with an independent set of 30 skeletal remain samples using SNaPshot multiplex based on single nucleotide primer extension. Four CpG sites on TMEM51, TRIM59, ELOVL2, and EPHA6 genes showed moderate or weak correlations between methylation and age, which suggests further investigation of these markers to predict the age of bones., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflicts of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Laying hens suffer from osteoporosis during their laying period, which causes bone fragility and susceptibility to fracture. This study evaluated the changes of mechanical properties of their bones during the laying period (from 18 to 77 wk) by using nano-indentation, atomic force microscope, X-Ray diffraction, and Raman spectroscopy. Results indicated that the crystallite sizes of bioapatite in femur decreased significantly from 34.45 to 29.26 nm during aging from 18 to 49 wk. Then, the value increased to 37.79 nm at 77 wk. Despite the abundance in bone (usually >50 wt.%), bioapatite mineral content showed no continuous enhancement during aging. The fibrils demonstrated more regular and organized structure during the laying period. Meanwhile the elastic moduli (E) and hardness (H) of femur increased from 10.84 to 18.39 GPa and 43.79 to 97.21 Vickers respectively during this period. The changes in mechanical properties are hence tightly related to the structure of bone (composed of both collagen and mineral), rather than directly related to the mineralogical properties of bone bioapatite. This study addressed the importance of the interaction between collagen and bioapatite mineral during the laying period of hens by microscopic, physicochemical, and mechanical analysis., (© 2019 Poultry Science Association Inc.)

To study the effects of pre-lay dietary Ca and strain on Ca utilization and femur quality at 1st through to 50th egg, 30 Lohmann Brown (LB) and 30 Lohmann Selected Leghorn-Lite (LSL) pullets (14 weeks of age, woa) reared under same management regimen were used. Six pullets/strain were necropsied for baseline femur samples and the rest (24 pullets/strain) placed in individual cages (65 × 30 × 45 cm3) and fed 1% Ca developer diet for 2 wk. At 16 woa, all pullets were weighed and allocated within strains to pre-lay diets (2.5 vs. 4.0% Ca) effectively creating a 2 × 2 factorial arrangement. The pullets were offered pre-lay diets for 2 wk and switched to 4% Ca diet at 18 woa. The diets contained TiO2 to determine apparent retention (AR) of Ca. The age, BW, and feed intake (FI) at 1st, 25th, and 50th egg were recorded. Excreta samples were taken during pre-lay, at 1st and 25th egg and 4 hens per treatment were necropsied for femur samples at 1st, 25th, and 50th egg. There was no interaction (P > 0.05) between pre-lay Ca and strain on Ca intake, femur mineral density (FMD), mineral content (FMC), breaking strength (FBS), and ash (FA) content at 1st, 25th, and 50th egg. At 1st egg, pre-lay Ca interacted with strain on AR of Ca (P = 0.014) such that LB hens retained more Ca at 2.5 vs. 4.0% Ca or LSL at 2.5% Ca. Pre-lay Ca had no effect (P > 0.05) on FMD, FMC, FBS, and FA at 1st, 25th, and 50th egg lay. Compared with LB hens, LSL hens had higher FMD (0.30 vs. 0.19 g/cm2; P = 0.010) and FA (51.9 vs. 42.5%; P < 0.01) at 1st egg and FBS (259.4 vs. 173.8 N, P < 0.01) at 25th egg. In conclusion, except at 25th egg, pre-lay Ca and strain had independent effect on Ca utilization. Femur attributes to 1st egg suggested innate need for LSL birds to accumulate critical bone mass prior to first oviposition., (© 2019 Poultry Science Association Inc.)

Quick setting and poor injectability due to liquid-solid phase separation have limited the clinical use of brushite and monetite cements. The presence of certain ions in the cement during the setting reaction moderate the setting time and properties of the cement. This study reports the preparation of injectable bone cement by using biphasic calcium phosphate (BCP) extracted from femur lamb bone by calcination at 1450 °C. EDX analysis infers the presence of Mg and Na ions as trace elements in BCP. X-ray diffraction patterns of the prepared cement confirmed the formation of brushite (DCPD) along with monetite (DCPA) as a minor phase. DCPA phase diminished gradually with a decrease in powder to liquid ratio (PLR). Initial and final setting time of 5.3 ± 0.5 and 14.67 ± 0.5 min respectively are obtained and within the acceptable recommended range for orthopedic applications. Exceptional injectability of ≈90% is achieved for all prepared bone cement samples. A decrease in compressive strength was observed with increase in the liquid phase of the cement, which is attributed to the higher degree of porosity in the set cement. Immersion of bone cement in simulated body fluid (SBF) for up to 7 days resulted in the formation of apatite layer on the surface of cement with Ca/P ratio 1.71, which enhanced the compressive strength from 2.88 to 9.15 MPa. The results demonstrate that bone cement produced from BCP extracted from femur lamb bone can be considered as potential bone substitute for regeneration and repair of bone defects., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background & Aims: Altering the lipid component in diets may affect the incidence of metabolic bone disease in patients dependent on parenteral nutrition. Consumption of polyunsaturated fatty acids (PUFA) can impact bone health by modulating calcium metabolism, prostaglandin synthesis, lipid oxidation, osteoblast formation, and osteoclastogenesis. The aim of this study was to evaluate the dietary effects of PUFA on murine bone health., Methods: Three-weeks-old male (n = 30) and female (n = 30) C57BL/6J mice were randomized into one of three dietary groups. The diets differed only in fat composition: soybean oil (SOY), rich in ω-6 PUFA; docosahexaenoic acid alone (DHA), an ω-3 PUFA; and DHA with arachidonic acid, an ω-6 PUFA, at a 20:1 ratio (DHA/ARA). After 9 weeks of dietary treatment, femurs were harvested for micro-computed tomographic analysis and mechanical testing via 3-point bending. Separate mice from each group were used solely for serial blood draws for measurement of biomarkers of bone formation and resorption., Results: At the microstructural level, although some parameters in cortical bone reached differences that were statistically significant in female mice, these were too small to be considered biologically relevant. Similarly, trabecular bone parameters in male mice were statistically different in some dietary groups, although the biological interpretation of such subtle changes translate into a lack of effect in favor of any of the experimental diets. No differences were noted at the mechanical level and in blood-based biomarkers of bone metabolism across dietary groups within gender., Conclusions: Subtle differences were noted at the bones' microstructural level, however these are likely the result of random effects that do not translate into changes that are biologically relevant. Similarly, differences were not seen at the mechanical level, nor were they reflected in blood-based biomarkers of bone metabolism. Altogether, dietary consumption of PUFA do not seem to affect bone structure or metabolism in a healthy model of growing mice., (Copyright © 2018 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.)

Exposure to polychlorinated biphenyls (PCBs), which are persistent lipophilic environmental pollutants, has a variety of adverse effects on wildlife and human health, including bone mineralization, growth and mechanical strength. The present study evaluated the effects of lactational exposure to nondioxin-like PCB-155 and dioxin-like PCB-169, individually and in combination, on pubertal rat femur development and its biomechanics. After offspring delivery, Wistar rat mothers were divided into four groups, i.e., PCB-169, PCB-155, PCB-155+169 and control, and were administered PCBs intraperitoneally. Data on bone geometry, biomechanics and mineral composition were obtained by analysis of femurs from 42-day-old offspring by microCT scanning, three-point bending test and inductively coupled plasma mass spectrometry. Decreased somatic mass and femur size, i.e., mass, periosteal circumference and cross sectional area, were observed in the PCB-169 and PCB-155 groups. Additionally, lactational exposure to planar PCB-169 resulted in harder and more brittle bones containing higher amounts of minerals. Combined exposure to structurally and functionally different PCBs demonstrated only mild alterations in bone width and mineralization. To conclude, our results demonstrated that alterations, observed on postnatal day 42, were primarily induced by PCB-169, while toxicity from both of the individual congeners may have been reduced in the combined group., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Cement augmentation following benign bone tumor surgery, i.e. curettage and cementation, is recommended in patients at high risk of fracture. Nonetheless, identifying appropriate cases and devices for augmentation remains debatable. Our goal was to develop a validated biomechanical tool to: predict the post-surgery strength of a femoral bone, assess the precision and accuracy of the predicted strength, and discover the mechanisms of reconstruction failure, with the aim of finding a safe biomechanical fixation. Tumor surgery was mimicked in quantitative-CT (QCT) scanned cadaveric human distal femora, and subsequently tested in compression to measure bone strength (F Exp ). Finite element (FE) models considering bone material non-homogeneity and non-linearity were constructed to predict bone strength (F FE ). Analyses of contact, damage, and crack initiation at the bone-cement interface (BCI) were completed to investigate critical failure locations. Results of paired t-tests did not show a significant difference between F Exp and F FE (P > 0.05); linear regression analysis resulted in good correlation between F Exp and F FE (R 2  = 0.94). Evaluation of the models precision using linear regression analysis yielded R 2  = 0.89, with the slope = 1.08 and intercept = -324.16 N. FE analyses showed the initiation of damage and crack and a larger cement debonding area at the proximal end and most interior part of BCI, respectively. Therefore, we speculated that devices that reinforce critical failure locations offer the most biomechanical advantage. The QCT-based FE method proved to be a reliable tool to predict distal femoral strength, identify some causes of reconstruction failure, and assist in a safer selection of fixation devices to reduce post-operative fracture risk., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Laying hen skeletal health continues to be an industry priority. Bone ash and bone Ca quantification in laying hen long bones provides valuable information on skeletal health. Unfortunately, these measurements can only be accomplished by sacrificing hens, thus making longitudinal measurements on the same hen impossible. Quantitative computed tomography (QCT), used with a calcium hydroxyapatite phantom, has been used to determine bone density of wings and legs as well as live hens throughout the production cycle by scanning with a calcium hydroxyapatite phantom. QCT has also been used to scan live hens throughout the production cycle. The purpose of this study was to determine how QCT calculated bone mineral content (QCT BMC) corresponds to analytical bone Ca and bone ash. Wing and leg quarters from 72-wk-old W-36 hens were QCT scanned along with a QCT Phantom. After scanning, humeri, femurs, and tibias were cleaned, divided into epiphysis (E) and diaphysis (D), fat extracted, ashed, and digested under nitric acid, and Ca was determined by atomic absorption spectroscopy was used to determine E, D, and whole bone Ca. Four bones/type were used for E and D, while 6 bones/type were used for whole bone measurements. A second set of bones were prepared to determine correlation of BMC to bone ash. QCT scans were analyzed with Mimics software (Materialise NV, Leuven, Belgium) to calculate bone volume and density in Hounsfield units. Utilizing the QCT phantom and bone volume, BMC was calculated for E, D, and whole bone. Data were analyzed with regression analysis and Pearson correlation coefficients were determined. Analytical Ca was correlated to QCT BMC for E (R = 0.84, P < 0.01), D (R = 0.99, P < 0.01), and whole bone (R = 0.97, P < 0.01). Whole bone ash was highly correlated to QCT BMC for femur (N = 47, R = 0.97, P < 0.001), tibia (N = 50, R = 0.94, P < 0.001), and keel (N 50, R = 0.94, P < 0.001). Whole bone ash and QCT BMC values of femur and tibia were not different (P = 0.39 and 0.22 respectively). Based on this information, QCT could provide relative quantitative assessment of total bone mineral in live birds proving useful in long-term studies., (© 2019 Poultry Science Association Inc.)

Proteomic techniques in bones forensic samples are increasingly, being applied. The main aim of forensic sciences is the estimation of postmortem interval. Most current techniques are useful for the first post-mortem stages. However, in the case of osseous remains, these techniques may be difficult to use due to the high level of decomposition of the sample. Our objective was to attempt to know whether there is a protein profile in human bone remains that would enable a late postmortem. interval ranging from 5 to 20 years postmortem to be estimated. A total of 40 femur bones from 40 different cadavers (data range 5-20 years) were use. Of the 275 total proteins, we excluded the circulating ones (n = 227), leaving a total of 48 proteins (29 structural and 19 functional) were found. A multiple correspondence analysis was applied on the 48 proteins. Finally selecting 32 proteins that allowed us to discriminate between the. two groups of postmortem interval. Analysis of the protein profile present in bone permits an approximation of the date of death within the studied interval, and could be used to complement other tests for estimating the postmortem interval., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This research study shows the adsorptive potential of biopolymer based nanocomposite for the removal of Pb(II) ions from aqueous phase. The nanocomposite was synthesized by Femur calcined hydroxyapatite and glutaraldehyde cross-linked chitosan. Characterizations like Fourier Transform Infrared (FTIR) Spectroscopy, X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) were performed to investigate the structural modifications, mineral composition and the surface texture of prepared nanocomposite. The adsorption of Pb(II) ions over nanocomposite reveals that the synthesized solid sorbent has promising abatement tendency for heavy metal ions. The adsorption process followed the pseudo-second-order kinetics and the equilibrium data of lead ions adsorption was best fitted to Sips isotherm model. The uptake capacity of synthesized nanocomposite increased from 209 mg/g to 354 mg/g with rise in temperature from 18 °C to 48 °C. The thermodynamic analysis suggested that the Pb(II) ions adsorption was spontaneous and endothermic in nature. Additionally, enthalpy of adsorption (~22.07 KJ/mol) indicated that the heavy metal ions were chemisorbed over nanocomposite surface. Adsorption of Pb 2+ increased about ~1.6 times in the observed pH range and highest uptake was obtained at pH 5., (Copyright © 2018 Elsevier B.V. All rights reserved.)

We hypothesized that performance and bone mineralization of 2 broiler lines will benefit from increasing vitamin D (vitD) supplementation above current commercial levels and by partial substitution of D3 by 25-OH-D3. Male Ross 308 and 708 chicks (n = 576), were offered diets with low (LD; 1,000), medium (MD; 4,000) or high levels of D3 (HD; 7,000 IU/kg), and medium levels of vitD where the majority of D3 was substituted by 25-OH-D3 (25MD; 1,000 D3+3,000 25-OH-D3 IU/kg). Performance was measured at the end of starter (day 10), grower (day 24), and finisher periods (day 38). Three birds per pen were dissected at the end of each period to assess tibia and femur ash percentage (%), ash weight, bone breaking strength (BBS), and serum levels of 25-OH-D3. Remaining birds were gait scored (GS) at day 37 of age. Genotype and diet did not interact for any trait, whilst performance was not affected by diet. Ross 708 had lower body weight (P < 0.005), higher feed conversion ratio over the grower period (P < 0.05), similar levels of 25-OH-D3, but higher GS (P < 0.05) than Ross 308. Serum 25-OH-D3 levels were affected by diet at the end of the starter and grower periods (P < 0.05), being lowest for LD and highest for 25MD. Diet affected GS (P < 0.01), being higher in LD than 25MD. Femur ash % was higher at the end of the starter and grower periods for 25MD than LD and for both HD and 25MD than LD (P < 0.05). Femur and tibia ash weight were higher for 25MD in comparison to LD birds (P < 0.05) at the end of the grower period. Femur and tibia BBS were higher (P < 0.05) for 25MD in comparison to LD at the end of the grower and finisher periods, respectively. Overall, effects of vitD supply were more pronounced for femur than for tibia mineralization. Results do not suggest supplementation of vitD above current maximum levels and support partial substitution by 25-OH-D3.

Mitochondrial DNA (mtDNA) amplification and Massively Parallel Sequencing (MPS) using an early access version of the Precision ID Whole MtDNA Genome Panel (Thermo Fisher Scientific) and the Ion Personal Genome Machine (PGM) were evaluated using 15 forensically relevant samples. Samples were selected to represent typical forensic specimens for mtDNA analysis including hairs, hair shafts, swabs and ancient solid tissue samples (bones and teeth) that were stored in the freezer for up to several years after having been typed with conventional Sanger-type Sequencing and Capillary Electrophoresis. The MPS haplotypes confirmed the earlier results in all samples and provided additional sequence information that improved discrimination power and haplogroup estimation. The results raised the appetite for further experiments to validate and apply the new technology in forensic practice., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The nanoscale characteristics of the mineral phase in bone tissue such as nanocrystal size, organization, structure and composition have been identified as potential markers of bone quality. However, such characterization remains challenging since it requires combining structural analysis and imaging modalities with nanoscale precision. In this paper, we report the first application of automated crystal orientation mapping using transmission electron microscopy (ACOM-TEM) to the structural analysis of bone mineral at the individual nanocrystal level. By controlling the nanocrystal growth of a cortical bovine bone model artificially heated up to 1000 °C, we highlight the potential of this technique. We thus show that the combination of sample mapping by scanning and the crystallographic information derived from the collected electron diffraction patterns provides a more rigorous analysis of the mineral nanostructure than standard TEM. In particular, we demonstrate that nanocrystal orientation maps yield valuable information for dimensional analysis. Furthermore, we show that ACOM-TEM has sufficient sensitivity to distinguish between phases with close crystal structures and we address unresolved questions regarding the existence of a hexagonal to monoclinic phase transition induced by heating. This first study therefore opens new perspectives in bone characterization at the nanoscale, a daunting challenge in the biomedical and archaeological fields, which could also prove particularly useful to study the mineral characteristics of tissue grown at the interface with biomaterials implants., Statement of Significance: In this paper, we propose a new approach to assess the mineral properties of bone at the individual nanocrystal level, a major challenge for decades. We use a modified Transmission Electron Microscopy acquisition mode to perform an Automated Crystal Orientation Mapping (ACOM-TEM) by analyzing electron diffraction patterns. We tune the mineral nanocrystal size by heating a model bovine bone system and show that this method allows precisely assessing the mineral nanocrystal size, orientation and crystallographic phase. ACOM-TEM therefore has sufficient sensitivity to solve problems that couldn't be answered using X-ray diffraction. We thus revisit the fine mechanisms of bone nanocrystal growth upon heating, a process currently used for bone graft manufacturing, also of practical interest for forensic science and archaeology., (Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The incidence of fragility fractures is expected to increase in the near future due to an aging population. Therefore, improved tools for fracture prediction are required to treat and prevent these injuries efficiently. For such tools to succeed, a better understanding of the deformation mechanisms in bone over different length scales is needed. In this study, an experimental setup including mechanical tensile testing in combination with digital image correlation (DIC) and small/wide angle X-ray scattering (SAXS/WAXS) was used to study deformation at multiple length scales in bovine cortical bone. Furthermore, micro-CT imaging provided detailed information about tissue microstructure. The combination of these techniques enabled measurements of local deformations at the tissue- and nanoscales. The orientation of the microstructure relative to the tensile loading was found to influence the strain magnitude on all length scales. Strains in the collagen fibers were 2-3 times as high as the strains found in the mineral crystals for samples with microstructure oriented parallel to the loading. The local tissue strain at fracture was found to be around 0.5%, independent of tissue orientation. However, the maximum force and the irregularity of the crack path were higher when the load was applied parallel to the tissue orientation. This study clearly shows the potential of combining these different experimental techniques concurrently with mechanical testing to gain a better understanding of bone damage and fracture over multiple length scales in cortical bone., Statement of Significance: To understand the pathophysiology of bone, it is important to improve our knowledge about the deformation and fracture mechanisms in bone. In this study, we combine several recently available experimental techniques with mechanical loading to investigate the deformation mechanisms in compact bone tissue on several length scales simultaneously. The experimental setup included mechanical tensile testing in combination with digital image correlation, microCT imaging, and small/wide angle X-ray scattering. The combination of techniques enabled measurements of local deformations at the tissue- and nanoscales. The study clearly shows the potential of combining different experimental techniques concurrently with mechanical testing to gain a better understanding of structure-property-function relationships in bone tissue., (Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

In view of their key roles in the bone physiology (e.g., in the biomineralization process) and their potential implication in bone pathologies, an approach to study lipids in situ is needed. The aim of the present paper is to propose an original procedure to characterize lipids in both bone marrow (BM) and mineralized tissue (MT) compartments, taking into consideration sample preparation, lipid extraction and analytical issues, when using small sample size (≤ 0.5g of rat femurs). The potential contamination of the MT by marrow lipids and the poor accessibility of certain lipids from the MT - two major issues in bone handling - were taking care, respectively by performing two cleaning steps after BM removal and by adding a demineralization step to the overall lipid extraction protocol. For lipid analyses, a multi-one-dimensional HP-TLC method was developed to analyze the major neutral and polar lipids at once and showed an excellent resolution (for 15 standards) and a good precision (inter-day RSD<13%). When subjected to the entire "lipid extraction-HP-TLC" protocol, spike recoveries of the standards ranged between 76 and 122%. This HP-TLC method was suitable for lipid determination in both BM and MT [e.g., the MT had 5-times lesser lipids and a lower TG/phospholipid ratio than the BM (P <0.05)], and was quite reliable in term of lipid quantification. The demineralization step allowed to extract additional phosphatidylserine and esterified cholesterol from the MT, suggesting that these two species were associated to the mineralized matrix possibly in relation to their physiological role in the bone. Moreover, a reverse phase HPLC method for fatty acid determination as naphthacyl esters was set up to study fatty acids in bone samples and was used to validate the HP-TLC data. The fatty acid profile of the MT exhibited lower linoleic acid (18:2 n-6) and linolenic acid (18:3 n-3+n-6) levels and higher arachidonic acid (20:4 n-6) and docosahexaenoic acid (22:6 n-3) levels (P<0.05, compared to BM), suggesting that the MT is more metabolically active than the BM in term of long chain fatty acid production. In sum, the present work should contribute to facilitate future studies in the bone lipid field in view to understand better their implication in the marrow fat expansion-associated bone pathologies, such as osteoporosis., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Natural collagen is easily available from animal tissues such as bones. Main limitations reported in the use of natural collagen are heterogeneity and loss of integrity during recovery. However, its natural complexity, functionality and bioactivity still remain to be achieved through synthetic and recombinant ways. Variability of physicochemical properties of collagen extracted from bovine bone by acetic acid was then investigated taking into account endogenous and exogenous factors. Endogenous: bovine's bones age (4 and 7 years) and anatomy (femur and tibia); exogenous: thermal treatments (spray-drying and lyophilisation). Scanning electron microscopy, spectroscopy (EDS, FTIR, UV/Vis and CD), differential scanning calorimetry (DSC), centesimal composition, mass spectrometry, amino acids and zeta-potential analysis were used for the purpose. Age correlated negatively with yield of recovery and positively with minerals and proteoglycans content. Comparing the anatomy, higher yields were found for tibias, and higher stability of tibias collagen in solution was noticed. Whatever the age and the anatomy, collagens were able to renature and to self-assemble into tri-dimensional structures. Nonetheless thermal stability and kinetics of renaturation were different. Variability of natural collagen with bone age and anatomy, and drying methodology, may be a crucial advantage to conceive tailor-made applications in either the biological or technical sector., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The effect of caponization on the mechanical properties of Polbar chicken bones was the subject of investigation. The biomechanical strength of bones and the risk of their deformation or fracture were determined on the basis of their geometric, structural, material, and densitometric properties. Eight-week-old cockerels of Polbar breed were surgically castrated and then fattened until the 24th week of life. It was observed that caponization did not influence the weight and length of either of the long bones. It did however significantly reduce their ash content and the Ca and P contents in their femur, and P content in their tibia. Dual energy x-ray absorptiometry densitometry revealed that bone mineral content of the mid-diaphyseal part of both bones were reduced. Similarly, the bone tissue density of bones decreased. Caponization influenced the bone's geometric structure increasing the internal and external diameters of the bones. The bone cross-sectional area was greater in capons, and, consequently, the cross-sectional moment of inertia and the radius of gyration significantly increased. However, the relative wall thickness and cortical index were not altered. The three-point bending tests revealed the negative effect of caponization on the mechanical endurance of bones. Yield strength, Young modulus, and yield stress, characterizing the strength of the bone's material, decreased in capons. That suggests a higher risk of permanent deformation as capon bones become less elastic. Concluding, caponization negatively influenced the quality characteristics of Polbar chicken long bones., (© 2016 Poultry Science Association Inc.)

The incorporation of carbonate has been recognized as an evident change in bone mineral (bioapatite) during aging. Laying hens (Gushi layer) at 4 stages of age (8 hens each stage) were studied by Raman spectroscopy and X-ray radiography to investigate the mineralogical changes and bone density, respectively. Cortical bones of the humerus and femur show a rapid increase of carbonate (∼1.9 wt.%) from sexual maturity to the peak of hens' laying period, while the densities of the cortical bones are relatively stable. Before sexual maturity, the density of the cortical bones increases considerably during aging. However, after the peak of the laying period, only femoral density continues elevating. Carbonate contents in the cortical bones reach the maximum at the peak of the laying period. Two pathways (halted growth of density and Ca-release due to the CO 3 incorporation) could both contribute to the intense Ca requirement for egg laying. Crystallization, however, has no significant changes during aging and the laying period. This study could shed light on the mechanism of mineral losses due to CO 3 incorporation, and also shows the advantages of Raman spectroscopy in tracking mineral loss in poultry bone., (© 2016 Poultry Science Association Inc.)

Transport of solutes helps to regulate normal physiology and proper function of cartilage in diarthrodial joints. Multiple studies have shown the effects of characteristic parameters such as concentration of proteoglycans and collagens and the orientation of collagen fibrils on the diffusion process. However, not much quantitative information and accurate models are available to help understand how the characteristics of the fluid surrounding articular cartilage influence the diffusion process. In this study, we used a combination of micro-computed tomography experiments and biphasic-solute finite element models to study the effects of three parameters of the overlying bath on the diffusion of neutral solutes across cartilage zones. Those parameters include bath size, degree of stirring of the bath, and the size and concentration of the stagnant layer that forms at the interface of cartilage and bath. Parametric studies determined the minimum of the finite bath size for which the diffusion behavior reduces to that of an infinite bath. Stirring of the bath proved to remarkably influence neutral solute transport across cartilage zones. The well-stirred condition was achieved only when the ratio of the diffusivity of bath to that of cartilage was greater than ≈1000. While the thickness of the stagnant layer at the cartilage-bath interface did not significantly influence the diffusion behavior, increase in its concentration substantially elevated solute concentration in cartilage. Sufficient stirring attenuated the effects of the stagnant layer. Our findings could be used for efficient design of experimental protocols aimed at understanding the transport of molecules across articular cartilage., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The present study examined the bone bonding strength of diamond-structured porous titanium-alloy (Porous-Ti-alloy) manufactured using the electron beam-melting technique in comparison with fiber mesh-coated or rough-surfaced implants. Cylindrical implants with four different pore sizes (500, 640, 800, and 1000μm) of Porous-Ti-alloy, titanium fiber mesh (FM), and surfaces roughened by titanium arc spray (Ti-spray) were implanted into the distal femur of rabbits. Bone bonding strength and histological bone ingrowth were evaluated at 4 and 12weeks after implantation. The bone bonding strength of Porous-Ti-alloy implants (640μm pore size) increased over time from 541.4N at 4weeks to 704.6N at 12weeks and was comparable to that of FM and Ti-spray implants at both weeks. No breakage of the porous structure after mechanical testing was found with Porous-Ti-alloy implants. Histological bone ingrowth that increased with implantation time occurred along the inner structure of Porous-Ti-alloy implants. There was no difference in bone ingrowth in Porous-Ti-alloy implants with pore sizes among 500, 640, and 800μm; however, less bone ingrowth was observed with the 1000μm pore size. These results indicated Porous-Ti-alloy implants with pore size under 800μm provided biologically active and mechanically stable surface for implant fixation to bone, and had potential advantages for weight bearing orthopedic implants such as acetabular cups., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Microstructural variations in bovine femoral cortices and its possible implications for the bone's mechanical behavior are characterized for a mature and a young bovine femur. Histological examination at several locations shows the presence of Haversian systems to be largely confined to the posterior region of any cross-section. Haversian bone is shown to have higher compressive strength than the non-Haversian primary bone present in the corresponding anterior regions. The anatomical variation in the compressive strength along diaphysis is found to correlate strongly with the Haversian density. Based on the differences in the failure surfaces observed from compressive failure, it is argued that the presence of Haversian systems plays a role in deflection of crack path, leading to non-prismatic failure surfaces. As biomaterials, such as bone cement and implants, closely interact with bone material, the structure-property relation established here can provide a basis for better design of future biomaterials., (Copyright © 2015 Elsevier B.V. All rights reserved.)

This work presents a cloud-point extraction process using the micelle-mediated extraction method for simultaneous preconcentration and determination of Sb(III) and Sb(V) species in biological and environmental samples as a prior preconcentration step to their spectrophotometric determination. The analytical system is based on the selective reaction between Sb(III) and 3-dichloro-6-(3-carboxy-2-hydroxy-1-naphthylazo)quinoxaline (DCHNAQ) in the presence of cetyltrimethylammonium bromide (CTAB) and potassium iodide at pH 4.5. Total Sb concentration was determined after reduction of Sb(V) to Sb(III) in the presence of potassium iodide and ascorbic acid. The optimal reaction conditions and extraction were studied, and the analytical characteristics of the method (e.g., limits of detection and quantification, linear range, preconcentration, improvement factors) were obtained. Linearity for Sb(III) was obeyed in the range of 0.2-20 ng ml(-1). The detection and quantification limits for the determination of Sb(III) were 0.055 and 0.185 ng ml(-1), respectively. The method has a lower detection limit and wider linear range, inexpensive instrument, and low cost, and is more sensitive compared with most other methods. The interference effect of some anions and cations was also studied. The method was applied to the determination of Sb(III) in the presence of Sb(V) and total antimony in blood plasma, urine, biological, and water samples., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Patients with chronic kidney disease (CKD) have an increased risk of fracture. Raloxifene is a mild antiresorptive agent that reduces fracture risk in the general population. Here we assessed the impact of raloxifene on the skeletal properties of animals with progressive CKD. Male Cy/+ rats that develop autosomal dominant cystic kidney disease were treated with either vehicle or raloxifene for five weeks. They were assessed for changes in mineral metabolism and skeletal parameters (microCT, histology, whole-bone mechanics, and material properties). Their normal littermates served as controls. Animals with CKD had significantly higher parathyroid hormone levels compared with normal controls, as well as inferior structural and mechanical skeletal properties. Raloxifene treatment resulted in lower bone remodeling rates and higher cancellous bone volume in the rats with CKD. Although it had little effect on cortical bone geometry, it resulted in higher energy to fracture and modulus of toughness values than vehicle-treated rats with CKD, achieving levels equivalent to normal controls. Animals treated with raloxifene had superior tissue-level mechanical properties as assessed by nanoindentation, and higher collagen D-periodic spacing as assessed by atomic force microscopy. Thus, raloxifene can positively impact whole-bone mechanical properties in CKD through its impact on skeletal material properties., (Copyright © 2015 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.)

Tissues for the study were obtained intraoperatively during hip replacement procedures from 96 patients. In all the cases, the indication for this treatment was primary or secondary degenerative changes in the hip joint. The subject of the study was the head and neck of the femur, resected in situ. Aluminium concentrations measured in femoral head and neck samples from patients aged between 25 and 91 were varied. Statistical methods were applied to determine the variations in relation to the parameters from the background survey. Significant differences in the aluminium content of femoral head samples were observed between patients under and over 60 years of age. Based on the results, it was confirmed that the aluminium accumulates in bones over a lifetime. The study showed that the content of aluminium in the head and neck of the femur depends on the factors such as: type of medicines taken, contact with chemicals at work, differences in body anatomy and sex. The study on the levels of aluminium in bones and the factors affecting its concentration is a valuable source of information for further research on the role of aluminium in bone diseases. Based on the investigations, it was found that the GF-AAS technique is the best analytical tool for routine analysis of aluminium in complex matrix samples. The use of femoral heads in the investigations was approved by the Bioethics Committee of the University of Medical Sciences in Poznań (Poland)., (Copyright © 2015 Elsevier Inc. All rights reserved.)

A protocol for the extraction of DNA from ancient skeletal material was developed. Bone specimen samples (powder or slice), buffer, pretreatment, and extraction methodologies were compared to investigate the best conditions yielding the highest concentration of DNA. The degree of extract contamination by polymerase chain reaction (PCR) inhibitors was compared as well. Pretreatment was carried out using agitation in an incubator shaker and microwave digestion. Subsequently, DNA from bones was isolated by the classical organic phenol-chloroform extraction and silica-based spin columns. Decalcification buffer for total demineralization was required as well as lysis buffer for cell lysis to obtain DNA, whereas microwave-assisted digestion proved to be very rapid, with an incubation time of 2min instead of 24h at an incubator shaker without using lysis buffer. The correction of isolated DNA was detected using real-time PCR with melt curve analysis, which was 82.8±0.2°C for highly repetitive α-satellite gene region specific for human chromosome 17 (locus D17Z1). Consequently, microwave-based DNA digestion followed by silica column yielded a high-purity DNA with a concentration of 19.40ng/μl and proved to be a superior alternative to the phenol-chloroform method, presenting an environmentally friendly and efficient technique for DNA extraction., (Copyright © 2015 Elsevier Inc. All rights reserved.)

A multi-isotope investigation (Sr and Pb isotopes and δ18O, δ13C and δ15N) was applied to bone and teeth from an unidentified male found drowned in the"IJ" Ruyterkade in Amsterdam, The Netherlands in March of 1999. The individual remained unidentified until mid 2013, after the isotope study was completed. Coupled δ13C and δ15N values in bone collagen recovered from rib and femur are consistent with an omnivore living in a region where C3-type diet dominates (i.e. Europe). Integrated Sr and Pb isotopes and δ18O values in canine and third molar teeth and femur and rib bone data exclude extended residence in north-west Europe and particularly The Netherlands. Characteristic Pb isotope ratios coupled with inferred δ18O values of drinking water argue for a most probable place of origin for the unidentified individual in west and south Poland, south-east Slovakia and the region of Ukraine-Romania-Bulgaria, specifically the region associated with the Carpathian Mountains. Independent of the isotope study, the Cold Case Team made a positive identification with an individual from south-west Poland, validating the results of the multiple-isotopic approach., (Copyright © 2014 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.)

Reducing the data collection time without affecting the signal intensity and spectral resolution is one of the major challenges for the widespread application of multidimensional nuclear magnetic resonance (NMR) spectroscopy, especially in experiments conducted on complex heterogeneous biological systems such as bone. In most of these experiments, the NMR data collection time is ultimately governed by the proton spin-lattice relaxation times (T1). For over two decades, gadolinium(III)-DTPA (Gd-DTPA, DTPA=Diethylene triamine pentaacetic acid) has been one of the most widely used contrast-enhancement agents in magnetic resonance imaging (MRI). In this study, we demonstrate that Gd-DTPA can also be effectively used to enhance the longitudinal relaxation rates of protons in solid-state NMR experiments conducted on bone without significant line-broadening and chemical-shift-perturbation side effects. Using bovine cortical bone samples incubated in different concentrations of Gd-DTPA complex, the (1)H T1 values were calculated from data collected by (1)H spin-inversion recovery method detected in natural-abundance (13)C cross-polarization magic angle spinning (CPMAS) NMR experiments. Our results reveal that the (1)H T1 values can be successfully reduced by a factor of 3.5 using as low as 10mM Gd-DTPA without reducing the spectral resolution and thus enabling faster data acquisition of the (13)C CPMAS spectra. These results obtained from (13)C-detected CPMAS experiments were further confirmed using (1)H-detected ultrafast MAS experiments on Gd-DTPA doped bone samples. This approach considerably improves the signal-to-noise ratio per unit time of NMR experiments applied to bone samples by reducing the experimental time required to acquire the same number of scans., (Copyright © 2014 Elsevier Inc. All rights reserved.)

An in vitro method for extraction and quantification of zoledronic acid (ZA) from murine bone was developed. Whole mouse bones were incubated in ZA solutions with predetermined concentrations and bound ZA was subsequently extracted from bone with phosphoric acid and derivatized using trimethylsilyl diazomethane (TMS-DAM). ZA tetra-methyl phosphonate was quantified by liquid chromatography coupled with tandem mass spectrometry (LC/MS/MS). This resulted in a sensitive, accurate, and precise method that was linear over three orders of magnitude (0.0250-50.0μg/mL ZA). For quality control (QC) samples, intra-and inter-day coefficients of variance were calculated and were less than 10%. This method was then applied to an in vivo model to quantitate ZA from the femur and mandible of three mice treated with ZA for two weeks. The mean ZA extracted from the mandible was four fold higher than that extracted from the femur (3.06±0.52 vs. 0.76±0.09ng/mg, respectively) indicating that ZA did not distribute equally in the skeleton and had a preference to the mandible. In conclusion, a highly sensitive method to measure ZA from mouse skeleton was developed, which can be easily adapted to multiple mammalian models including humans receiving ZA treatment., (Copyright © 2013 Elsevier B.V. All rights reserved.)

We investigate the three-dimensional (3-D) organization of mineralized collagen fibrils in human cortical bone based on synchrotron X-ray phase nano-tomography images. In lamellar bone the collagen fibrils are assumed to have a plywood-like arrangement, but due to experimental limitations the 3-D fibril structure has only been deduced from section surfaces so far and the findings have been controversial. Breakthroughs in synchrotron tomographic imaging have given access to direct 3-D information on the bone structure at the nanoscale level. Using an autocorrelation-based orientation measure we confirm that the fibrils are unidirectional in quasi-planes of sub-lamellae and find two specific dominant patterns, oscillating and twisted plywoods coexisting in a single osteon. Both patterns exhibit smooth orientation changes between adjacent quasi-planes. Moreover, we find that the periodic changes in collagen fibril orientation are independent of fluctuations in local mass density. These data improve our understanding of the lamellar arrangement in bone and allow more detailed investigations of structure-function relationships at this scale, providing templates for bio-inspired materials. The presented methodology can be applied to non-destructive 3-D characterization of the sub-micron scale structure of other natural and artificial mineralized biomaterials., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is increasingly becoming a popular technique to probe micro-structural details of biomaterial such as bone with pico-meter resolution. Due to high-resolution structural details probed by SSNMR methods, handling of bone samples and experimental protocol are very crucial aspects of study. We present here first report of the effect of various experimental protocols and handling methods of bone samples on measured SSNMR parameters. Various popular SSNMR experiments were performed on intact cortical bone sample collected from fresh animal, immediately after removal from animal systems, and results were compared with bone samples preserved in different conditions. We find that the best experimental conditions for SSNMR parameters of bones correspond to preservation at -20 °C and in 70% ethanol solution. Various other SSNMR parameters were compared corresponding to different experimental conditions. Our study has helped in finding best experimental protocol for SSNMR studies of bone. This study will be of further help in the application of SSNMR studies on large bone disease related animal model systems for statistically significant results., (© 2013 Elsevier Inc. All rights reserved.)

Properties of elasticity, hardness and viscosity are determined for the study of the visco-elastoplastic behavior of bones. The mechanical properties are compared in two upright sections of the bone due to their anisotropy. Besides, influence of hydration treatments leading to structural modifications of collagen and ground substance contents of bones on the mechanical properties is studied on a femoral cortical bovine bone. The treatments applied to the bone are used by forensic anthropologists to remove the soft tissue and modifying the hydration degree coupled to the collagen content. From instrumented indentation experiments, the hardness is characterized by the macrohardness and a hardness length-scale factor stating the hardness-load dependence. The elastic modulus results from the application of the methodology of Oliver and Pharr (1992). The coefficient of viscosity is deduced from a rheological model representing the indenter time-displacement observed under the application of a constant load. As a result, all the mechanical properties are found to be lower in the transverse section in an extent depending on the hydration treatment, i.e. the different values are located between 5% and 25% for the hardness around 0.5GPa, between 25% and 40% for the elastic modulus around 20GPa and between 2% and 35% for the coefficient of viscosity around 60GPa.s. Unexpectedly, the elastic modulus to coefficient of viscosity ratio is found to be independent on the hydration treatment., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The mechanical properties of demineralized bovine cortical femur bone were investigated by cyclic loading-unloading compression in three anatomical directions (longitudinal, radial, transverse) within the physiological strain range. The loading responses in the radial and transverse directions were nearly linear up to 2% strain, while the response in longitudinal direction was strongly non-linear in that range. The unloading responses were non-linear for each anatomical direction, giving rise to overall loading-unloading hysteresis and cyclic dissipation of energy. The mechanical properties were observed to be anisotropic: the radial direction was found to be the most energy dissipative, while the longitudinal direction appeared to be the stiffest bone direction. The cyclic loading mostly affects the bone stiffness in the radial and transverse directions, while the longitudinal direction was found to be the least affected. These anisotropic properties can be attributed to the differences in collagen fibers alignment and different microstructural architecture in three different anatomical bone directions., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Chemical pretreatment has been the prevailing sample preparation procedure for infrared (IR) spectroscopic studies on bone. However, experiments have indicated that chemical pretreatment can potentially affect the interactions between the components. Typically the IR techniques have involved transmission experiments. Here we report experimental studies using photoacoustic Fourier transform infrared spectroscopy (PA-FTIR). As a nondestructive technique, PA-FTIR can detect absorbance spectrum from a sample at controllable sampling depth and with little or no sample preparation. Additionally, the coupling inert gas, helium, which is utilized in the PA-FTIR system, can inhibit bacteria growth of bone by displacing oxygen. Therefore, we used this technique to study the undisturbed human cortical bone. It is found that photoacoustic mode (linear-scan, LS-PA-FTIR) can obtain basically similar spectra of bone as compared to the traditional transmission mode, but it seems more sensitive to amide III and ν(2) carbonate bands. The ν(3) phosphate band is indicative of detailed mineral structure and symmetry of native bone. The PA-FTIR depth profiling experiments on human cortical bone also indicate the influence of water on OH band and the cutting effects on amide I and mineral bands. Our results indicate that phosphate ion geometry appears less symmetric in its undisturbed state as detected by the PA-FTIR as compared to higher symmetry observed using transmission techniques on disturbed samples. Moreover, the PA-FTIR spectra indicate a band at 1747 cm(-1) possibly resulting from CO stretching of lipids, cholesterol esters, and triglycerides from the arteries. Comparison of the spectra in transverse and longitudinal cross-sections demonstrates that, the surface area of the longitudinal section bone appears to have more organic matrix exposed and with higher mineral stoichiometry., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A miniaturized version of the end notch flexure test was used in the context of pure mode II fracture characterization of bovine cortical bone. To overcome the difficulties intrinsic to crack length monitoring during its propagation an equivalent crack method was employed as data reduction scheme. The proposed method was validated numerically by means of a finite element analysis including a cohesive zone modeling and subsequently applied to experimental results to determine the fracture energy of bone under pure mode II loading. Finally, a cohesive law representative of fracture behavior of each specimen was determined employing an inverse method, considering a trapezoidal shape for the softening law. The consistency of the obtained results leads to the conclusion that the trapezoidal law is adequate to simulate fracture behavior of bone under mode II loading. The proposed testing setup and the employed data reduction scheme constitute powerful tools in which concerns fracture characterization of bone under pure mode II loading and can be viewed as the main outcomes of this work., (Copyright © 2012 Elsevier B.V. All rights reserved.)

It is of great interest to delineate the effect of orientation distribution of mineral crystals on the bulk mechanical behavior of bone. Using a unique synergistic approach combining a progressive loading scheme and synchrotron X-ray scattering techniques, human cortical bone specimens were tested in compression to examine the in situ mechanical behavior of mineral crystals aligned in different orientations. The orientation distribution was quantitatively estimated by measuring the X-ray diffraction intensity from the (002) plane in mineral crystals. In addition, the average longitudinal (c-axis), transverse (a-axis), and shear strains of the subset of mineral crystals aligned in each orientation were determined by measuring the lattice deformation normal to three distinct crystallographic planes (i.e. 002, 310, and 213) in the crystals. The experimental results indicated that the in situ strain and stress of mineral crystals varied with orientations. The normal strain and stress in the longitudinally aligned mineral crystals were markedly greater than those in the transversely oriented crystals, whereas the shear stress reached a maximum for the crystals aligned in ±30° with respect to the loading direction. The maximum principal strain and stress were observed in the mineral crystals oriented along the loading axis, with a similar trend observed in the maximum shear strain and stress. By examining the in situ behavior, the contribution of mineral crystals to load bearing and the bulk behavior of bone are discussed., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

A theoretical experimentally based multi-scale model of the elastic response of cortical bone is presented. It portrays the hierarchical structure of bone as a composite with interpenetrating biopolymers (collagen and non-collagenous proteins) and minerals (hydroxyapatite), together with void spaces (porosity). The model involves a bottom-up approach and employs micromechanics and classical lamination theories of composite materials. Experiments on cortical bone samples from bovine femur include completely demineralized and deproteinized bones as well as untreated bone samples. Porosity and microstructure are characterized using optical and scanning electron microscopy, and micro-computed tomography. Compression testing is used to measure longitudinal and transverse elastic moduli of all three bone types. The characterization of structure and properties of these three bone states provides a deeper understanding of the contributions of the individual components of bone to its elastic response and allows fine tuning of modeling assumptions. Very good agreement is found between theoretical modeling and compression testing results, confirming the validity of the interpretation of bone as an interpenetrating composite material., (Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The case under analysis refers to the remains of a young adult female found in a shallow grave during the construction work of a hospital in Northern Portugal. The forensic interest of the finding could not be ruled out since distinguishing features pointing to an archaeological grave were lacking. For example, absence of archaeological artefacts could not establish its forensic significance with certainty, together with the absence of modern objects, such as remnants of clothing or personal objects. In addition, although the remains were badly preserved, the condition may not have resulted from a long post-depositional period, but instead could be explained by the geology of the site and the presence of plant roots. The radiocarbon analysis of the remains was meant to establish the death of the individual to before or after the mid-1950s, from comparison with bomb-curve content values. A value of 0.9789 ± 0.0044 for F(14)C (pmC = 97.19 ± 0.44% Modern or Δ(14)C = -28.1 ± 4.4‰) was obtained, which placed the death of the individual in the pre-mod-1950s period. This report illustrates the use of radiocarbon analysis in establishing whether the human remains are contemporary or not and describes evidence for what appears to be an historic clandestine grave., (Copyright © 2011 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.)

Introduction: Tacrolimus (TAC) and cyclosporin (CsA) are commonly responsible for hypomagnesemia that predisposes in turn for hypertension, renal impairment and encephalopathy., Objective: The effects of TAC on Mg(2+)-homeostasis and of pre-existing Mg(2+)-deficiency on TAC immunosuppressive activity were compared to CsA in mice., Methods: Mg(2+) was quantified in plasma, erythrocytes, urine, feces, and femurs from mice treated with TAC 5mg/kg/day. Immunosuppression was assessed in splenocytes by mixed lymphocyte reaction, IL-2 quantification and CN activity determination., Results: Plasma and urine Mg(2+) levels in TAC-treated mice were significantly lower from day 7 until day 21 (p<0.05 versus control) and returned to control value at day 28. Mg(2+) levels were unchanged in erythrocyte, feces and femur. Inhibition of allogeneic proliferation, IL-2 production and CN activity were 68, 56 and 30% lower (p<0.01) after 7 days of TAC-treatment, and 72, 68 and 51% lower (p<0.01) after 7 days of CsA-treatment with a dose of 50mg/kg/day. Dietary-induced hypomagnesemia resulted in significant inhibition of CN activity (p<0.01) without alteration of IL-2 production or allogeneic proliferation. However, it did not alter the effects observed with CsA- or TAC-treatment on allogeneic proliferation, IL-2 production and CN activity., Conclusion: By contrast with CsA, long-course TAC-treatment induced an early, but transient, and moderate hypomagnesemia without alteration of bone or erythrocyte stocks, intestinal absorption or renal function. Therefore, in clinical use, TAC should be preferred to CsA in patients with pathological or pharmacological conditions which favor Mg(2+)-deficiency. However, dietary-induced hypomagnesemia did not alter the immunosuppressive effects of TAC and CsA., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Context: Insulin-like growth factor (IGF) signaling is essential for achieving optimal body size during fetal development, peak bone mass during puberty, and maximal fecundity in the reproductive period. IGF-II is considered the main fetal IGF, whereas IGF-I is more important postnatally. Pregnancy-associated plasma protein-A (PAPP-A) enhances local IGF signaling through cleavage of inhibitory IGF binding proteins. Conversely, inhibition of PAPP-A results in reduced local IGF action. Thus, PAPP-A knock-out (KO) mice are born as proportional dwarfs due to the dysregulation of IGF-II signaling during early embryogenesis that impacts body size. Relaxation of IgfII imprinting through mutation of a reciprocally imprinted downstream gene, H19, which allowed transcription of IGF-II from the normally silent maternal allele, rescued the dwarf phenotype of PAPP-A KO mice., Objective: To determine the effect of increased IGF-II expression on postnatal phenotypes of PAPP-A KO mice., Design: Young adult wild-type (WT), PAPP-A KO, H19 mutant (ΔH19/WT) and ΔH19/PAPP-A KO mice were characterized for skeletal phenotype (peripheral quantitative computed tomography at the midshaft and distal metaphysis of the femur) and reproductive phenotype (time to first litter, time between litters, pups per litter)., Results: Serum IGF-II levels were significantly increased in ΔH19/WT and ΔH19/PAPP-A KO mice compared to WT and PAPP-A KO mice; serum IGF-I levels were not affected by H19 mutation. PAPP-A KO mice had reductions in cortical thickness and in cortical and trabecular area, bone mineral content and bone mineral density compared to WT mice. There were no significant differences between PAPP-A KO and ΔH19/PAPP-A KO mice in any of the bone parameters. PAPP-A KO crossed with (×) PAPP-A KO had a longer time until first litter, normal time between subsequent litters, and significantly reduced number of pups per litter compared to WT×WT. ΔH19/PAPP-A KO×ΔH19/PAPP-A KO had an even longer time to first litter, but also longer time between litters. This phenotype was associated with female ΔH19/PAPP-A KO mice. Furthermore, these ΔH19/PAPP-A KO mouse mothers failed to care for their pups., Conclusions: An increase in IGF-II expression did not rescue the skeletal and reproductive deficiencies associated with reduced local IGF-I signaling in PAPP-A KO mice. In addition, the data suggest a potential new role for genomic imprinting at the IgfII/H19 locus affecting maternal behavior., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Surface energy is one of the important factors that govern protein adhesion and cell attachment on biomaterial surfaces. Inverse gas chromatography (IGC) provides an excellent method to measure the surface energetics of rough and porous biosurfaces. In this study IGC was used to characterize and compare the surface energetics of synthetic and biological hydroxyapatites (natural bone mineral). IGC experiments were performed on three samples: synthetic hydroxyapatites with two levels of purity (99% and 90%) and natural biological hydroxyapatite obtained from bovine trabecular bone. The Lifshitz-Van der Waals component of the surface free energy (γ(S)(LW)) and specific interaction parameter (ɛ(π)) were determined by using homologous series of n-alkanes and alkenes as IGC probe molecules, respectively. The synthetic hydroxyapatite had values of γ(S)(LW) of 33.4 mJm⁻² at 99% purity and 53.3 mJm⁻² at 90% purity. Biological hydroxyapatite had a value of γ(S)(LW) of 45.7 mJm⁻². For the synthetic hydroxyapatite, the values of π-bond specific interaction parameters, ɛ(π), were 0.95 mJ (99%) and 3.01 mJ (90%). The biological hydroxyapatite sample had a value of 2.44 mJ for ɛ(π). The results suggest that, as compared to the synthetic compounds, the biological apatite has considerable surface heterogeneity, either chemical (impurities) or structural suggesting a scaffold surface that is more conducive of protein adhesion and cell attachment., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The contribution of non-collagenous components of the extracellular matrix to bone strength is largely undefined. Here we report that deficiency of fibrillin-1 or fibrillin-2 microfibrils causes distinct changes in bone material and mechanical properties. Morphometric examination of mice with hypomorphic or null mutations in fibrillin-1 or fibrillin-2, respectively, revealed appreciable differences in the postnatal shaping and growth of long bones. Fourier transform infrared imaging spectroscopy indicated that fibrillin-1 plays a predominantly greater role than fibrillin-2 in determining the material properties of bones. Biomechanical tests demonstrated that fibrillin-2 exerts a greater positive influence on the mechanical properties of bone than fibrillin-1 assemblies. Published evidence indirectly supports the notion that the above findings are mostly, if not exclusively, related to the differential control of TGFβ family signaling by fibrillin proteins. Our study therefore advances our understanding of the role that extracellular microfibrils play in bone physiology and implicitly, in the pathogenesis of bone loss in human diseases caused by mutations in fibrillin-1 or -2., (Copyright © 2011 International Society of Matrix Biology. Published by Elsevier B.V. All rights reserved.)

This study explored whether laser-induced, site-specific implant surface modifications with micro- and nano-scale topography were able to promote bone formation. The aim was to evaluate the biomechanical and histological response to partly laser-modified titanium implants in comparison with machined implants. After an early 8-week healing period in rabbit tibia and femur, a 250% increase in removal torque was demonstrated for the partly laser-modified surface. Further, different fracture mechanisms were demonstrated for the two surfaces. Histologically, significantly more bone was found in direct contact with the laser-modified surface for the implants in the tibia sites, and a similar amount of bone tissue was observed in contact with the implant in the femoral sites. In conclusion, an improved bone-implant interface anchorage was promoted by an increase in micro- and nano-scale implant surface topography and surface oxide induced by topological laser treatment., From the Clinical Editor: Nanosized grooves in titanium implants markedly improve bone-implant anchorage by increasing the amount of bone formed in direct contact with the metal prosthesis., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Osteogenesis imperfecta (OI) is a clinically and genetically heterogeneous disease due primarily to mutations in the type I procollagen genes, COL1A1 and COL1A2, causing bone deformity and numerous lifetime fractures. OI murine (oim) model mice carry a mutation in the col1a2 gene causing aberrant production of homotrimeric type I collagen [α1(I)(3)], leading to bone fragility and glomerular accumulation of type I collagen. Previous studies demonstrated that heterozygous (+/oim) and homozygous (oim/oim) mice have elevated tibiae fluoride concentrations but reduced femoral biomechanics. However, it is unclear whether these 2 variables are causally related, because impaired renal function could reduce urinary fluoride excretion, thus elevating bone fluoride concentrations regardless of disease status. Our goal in this study was to determine whether dietary fluoride restriction would improve femoral biomechanics in oim mice. Wild-type, +/oim, and oim/oim mice were fed a control (5 mg/kg fluoride) or fluoride-restricted diet (0 mg/kg fluoride) for ∼13 wk, at which time plasma and femora were analyzed for fluoride concentrations and bone biomechanical properties. In wild-type, +/oim, and oim/oim mice, dietary fluoride restriction reduced femoral fluoride burden by 54-74%, respectively (P < 0.05), without affecting glomerular collagen deposition. Oim/oim mice fed the fluoride-restricted diet had reduced material tensile strength (P < 0.05) compared with oim/oim mice fed the control diet. However, dietary fluoride restriction did not affect stiffness or whole bone femoral breaking strength, regardless of genotype. These data suggest that oim mice have reduced bone strength due to homotrimeric type I collagen, independent of bone fluoride content.

We describe a novel high performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS) method for the simultaneous quantification of enzymatic immature (dihydroxylysinonorleucine DHLNL, hydroxylysinonorleucine HLNL) and mature (pyridinoline PYD, deoxypyridinoline DPD) collagen crosslinks in connective tissues. The crosslinks were separated on a C18 Atlantis T3 reversed-phase column with heptafluorobutyric acid (HFBA) as volatile ion-pairing reagent in an acetonitrile-water mobile phase. Detection was carried out by electrospray ionization mass spectrometry in a positive ion mode with selected ion recording (SIR). This method is more sensitive and selective than ion exchange chromatography with post-column ninhydrin detection which is the reference method used for the simultaneous quantification of collagen enzymatic divalent and trivalent crosslinks. The intra and inter-day precision errors were less than 3.4 and 7.7%, respectively for DHLNL, 3.5 and 5.9%, respectively for HLNL, 4.0 and 5.2%, respectively for PYD, 8.2 and 10.7%, respectively for DPD. This novel technique should be useful to quantify simultaneously DHLNL, HLNL, PYD and DPD in connective tissues and to evaluate the maturation of collagen by determination of the ratio between immature and mature enzymatic crosslinks., (Copyright 2010 Elsevier B.V. All rights reserved.)