Search

A high-fidelity numerical analysis methodology was proposed for evaluating the fuel rod cladding integrity of a Prototype Gen IV Sodium Fast Reactor (PGSFR) during normal operation and Design basis events (DBEs). The MARS-LMR code, system transient safety analysis code, was applied to analyze the DBEs. The results of the MARS-LMR code were used as boundary condition for a 3D computational fluid dynamics (CFD) analysis. The peak temperatures considering HCFs satisfied the cladding temperature limit. The temperature and pressure distributions were calculated by ANSYS CFX code, and applied to structural analysis. Structural analysis was performed using ANSYS Mechanical code. The seismic reactivity insertion SSE accident among DBEs had the highest peak cladding temperature and the maximum stress, as the value of 87 MPa. The fuel cladding had over 40 % safety margin, and the strain was below the strain limit. Deformation behavior was elucidated for providing relative coordinate data on each active fuel rod center. Bending deformation resulted in a flower shape, and bowing bundle did not interact with the duct of fuel assemblies. Fuel rod maximum expansion was generated with highest stress. Therefore, it was concluded that the fuel rod cladding of the PGSFR has sufficient structural safety margin during DBEs.

In-vessel retention through external reactor vessel cooling (IVR-ERVC) is a severe accident management (SAM) strategy that has been adopted and used in many nuclear reactors such as AP1000, APR1400, and light water reactor etc. Some reactor accidents have raised concerns about nuclear reactors among residents, leading to a decrease in residents' acceptability and many studies on SAM are being conducted. Experiments on IVR-ERVC are almost impossible due to its specificity, so fluid characteristics are analyzed through BALI experiments with similar condition. In this study, computational fluid dynamics (CFD) via Reynolds-averaged Navier-Stokes (RANS) and large eddy simulation (LES) for BALI experiments were performed. Steady-state CFD analysis was performed on three turbulence models, and SST k-ω model was in good agreement with the experimental measurement temperature within the maximum error range of 1.9%. LES CFD analysis was performed based on the RANS analysis results and it was confirmed that the temperature and wall heat flux for depth was consistent within an error range of 1.0% with BALI experiment. The LES CFD analysis results were compared with those of the Lagrangian-based solver. LES matched the temperature distribution better than SOPHIA, but SOPHIA calculated the position of boundary between stratified layer and convective layer more accurately. On the other hand, Lagrangian-based solver predicted several small eddy behaviors of the convective layer and LES predicted large vortex behavior. The vibration characteristics near the cooling part of the BALI experimental device were confirmed through Fast Fourier Transform (FFT) investigation. It was found that the power spectral density for pressure at least 10 times higher near the side cooling than near the top cooling.

Herein, a lithium modified Zeolitic Imidazolate Framework-90 (ZIF-90-OLi) was used in a slurry with its organic ligand Imidazole Carboxaldehyde (ICA) water, and glycol to improve the process conditions for the capture system and enhance the sorption ability. The performance of this slurry was compared to two other slurries, one based on the parent ZIF-90 nanoporous material with ICA/water/glycol and another based on ZIF-8, its organic ligand Methylimidazole (MIm) and water/glycol. The comparison to ZIF-8 was done because of its use as a ZIF of reference in carbon capture. The maximum sorption capacity for CO2 by the alkali containing slurry was 7.19 mol/L and the maximum CO2/N2 selectivity was 222.93 compared to 2.72 mol/L and 121.63 for the ZIF-8/water/glycol/mlm slurry.

We report here a novel anti-cancer therapy based on an avian-host-specific serotype Salmonella enterica serovar Gallinarum (S. Gallinarum) deficient in ppGpp synthesis. To monitor the tumor targeting, a bioluminescent ΔppGpp S. Gallinarum was constructed and injected intravenously into mice bearing syngeneic and human xenograft tumors. Strong bioluminescent signals were detected specifically in all grafted tumors at 2 days post-injection (dpi). The bacterial counts in normal and tumor tissue at 1 dpi revealed that ΔppGpp S. Gallinarum reached >108 CFU/g in tumor tissue and 106–107 CFU/g in endothelial organs; counts were much lower in other organs. At 16 dpi, ΔppGpp S. Gallinarum counts in tumor tissue decreased to ∼106 CFU/g, while those in the other organs became undetectable. A strong anti-cancer effect was observed after the injection of ΔppGpp S. Gallinarum into BALB/c mice grafted with CT26 colon cancer cells. This could be attributed to reduced virulence, which allowed the administration of at least a 10-fold greater dose (108 CFU) of ΔppGpp S. Gallinarum than other attenuated strains of S. enterica serovar Typhimurium (≤107 CFU). An advantage of the avian-specific S. Gallinarum as a cancer therapeutic should be a reduced capacity to cause infections or harm in humans.

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

Korea Atomic Energy Research Institute has been developing a pool-type sodium-cooled fast reactor of the Prototype Gen-IV Sodium-cooled Fast Reactor (PGSFR). To assess the effectiveness of the inherent safety features of the PGSFR, the system transients during design basis accidents and design extended conditions are analyzed with MARS-LMR and the subchannel blockage events are analyzed with MATRA-LMR-FB. In addition, the in-vessel source term is calculated based on the super-safe, small, and simple reactor methodology. The results show that the PGSFR meets safety acceptance criteria with a sufficient margin during the events and keeps accidents from deteriorating into more severe accidents.

The prototype generation IV sodium-cooled fast reactor (PGSFR) has been developed by the Korea Atomic Energy Research Institute. This reactor uses sodium as a reactor coolant to transfer the core heat energy to the turbine. Sodium has chemical characteristics that allow it to violently react with materials such as a water or steam. When a sodium–water reaction (SWR) occurs due to leakage or breakage of steam generator tubes, high-pressure waves and corrosive reaction products are produced, which threaten the structural integrity of the components of the intermediate heat-transfer system (IHTS) and the safety of the primary heat-transfer system (PHTS). In the PGSFR, SWR events are included in the design-basis event. This event should be analyzed from the viewpoint of the integrities of the IHTS and fuel rods. To evaluate the integrity of the IHTS based on the consequences of the SWR, the behaviors of the generated high-pressure waves are analyzed at the major positions of a failed IHTS loop using a sodium–water advanced analysis method-II code. The integrity of the fuel rods must be consistently maintained below the safety acceptance criteria to avoid the consequences of the SWR. The integrity of the PHTS is evaluated using the multidimensional analysis of reactor safety-liquid metal reactor code to model the whole plant.

In this study, we evaluated the anti-reovirus activity of kuraridin isolated from the roots of Sophora flavescens. In particular, we focused on whether this property is attributable to direct inhibition of reovirus attachment and/or inhibition of viral replication with the aid of time-of-addition (pre-treatment, simultaneous treatment, and post-treatment) experiments. No significant antiviral activity of kuraridin was detected in the pre-treatment assay. In the simultaneous assay, the 50% effective inhibitory concentrations (EC50) of kuraridin were 15.3–176.9 μM against human type 1–3 reoviruses (HRV1–3) and Korean porcine reovirus (PRV). Kuraridin completely blocked binding of viral sigma 1 protein to sialic acids at concentrations lower than 82.5 μM in the hemagglutination inhibition assay. Moreover, kuraridin inhibited HRV1–3 and PRV viral replication with EC50 values of 14.0–62.0 μM. Quantitative real-time PCR analysis disclosed strong suppression of reovirus RNA synthesis at the late stage (18 h) of virus replication by kuraridin. The viral yields of kuraridin-treated cells were significantly reduced at 24 h post-infection, compared with DMSO-treated cells. Our results collectively suggest that kuraridin inhibits virus adsorption and replication by inhibiting hemagglutination, viral RNA and protein synthesis and virus shedding, supporting its utility as a viable candidate antiviral drug against reoviruses.

Three-dimensional flow phenomena in a wire-wrapped 37-pin fuel assembly mock-up of a Japanese loop-type sodium-cooled fast reactor, Monju, were investigated with a numerical analysis using a general-purpose commercial computational fluid dynamics code, CFX. Complicated and vortical flow phenomena in the wire-wrapped 37-pin fuel assembly were captured by a Reynolds-averaged Navier–Stokes flow simulation using a shear stress transport turbulence model. The main purpose of the current study is to understand the three-dimensional complex flow phenomena in a wire-wrapped fuel assembly to support the license issue for the core design. Computational fluid dynamics results show good agreement with friction factor correlation models. The secondary flow in the corner and edge subchannels is much stronger than that in an interior subchannel. The axial velocity averaged in the corner and edge subchannels is higher than that averaged in the interior subchannels. Three-dimensional multiscale vortex structures start to be formed by an interaction between secondary flows around each wire-wrapped pin. Behavior of the large-scale vortex structures in the corner and edge subchannels is closely related to the relative position between the hexagonal duct wall and the helically wrapped wire spacer. The small-scale vortex is axially developed in the interior subchannels. Furthermore, a driving force on each wire spacer surface is closely related to the relative position between the hexagonal duct wall and the wire spacer.

Although breast cancer has a good prognosis compared with various cancers, metastatic breast cancer has an aggressive disease course and remains incurable. Therefore, treatment of early breast cancer to prevent recurrence and metastasis is crucial. Recently, the development of anti-cancer drugs, such as targeted agents and immuno-oncology, has been accelerating. Antibody-drug conjugates (ADCs) are also building a new paradigm. Particularly, ADCs targeting Trop-2 were approved for their efficacy in metastatic triple-negative breast cancer patients who received ≥2 prior systemic therapies and showed significant results in heavily pretreated hormone receptor-positive/HER2-negative breast cancer. In this brief review, we provide an overview of ongoing clinical trials of ADCs targeting Trop-2 in early breast cancer, specifically sacituzumab govitecan.

The wire-wrapped fuel bundle is an assembly design in a sodium-cooled fast reactor. A wire spacer is used to maintain a constant gap between rods and to enhance the mixing of coolants. The wire makes the flow complicated by creating a sweeping flow and vortex flow. The vortex affects the flow field and heat transfer inside the subchannels. However, studies on vortices in this geometry are limited. The purpose of this research is to investigate the vortex flow created in the wire-wrapped fuel bundle. For analysis, a RANS-based numerical analysis was conducted for a 37-pin geometry. The sensitivity study shows that simulation with the shear stress transport model is appropriate. For the case of Re of 37,100, the mechanisms of onset, periodicity, and rotational direction were analyzed. The vortex structures were reconstructed in a three-dimensional space. Vortices were periodically created in the interior subchannel three times for one wire rotation. In the edge subchannel, the largest vortex occurred. This large vortex structure blocked the swirl flow in the peripheral region. The small vortex formed in the corner subchannel was negligible. The results can help in understanding the flow field inside subchannels with sweeping flow and vortex structures. Keywords: Sodium-cooled fast reactor, Wire-wrapped fuel bundle, Computational fluid dynamics, Vortex identification

Bacteria can be engineered to deliver anticancer proteins to tumors via a controlled expression system that maximizes the concentration of the therapeutic agent in the tumor. L-asparaginase (L-ASNase), which primarily converts asparagine to aspartate, is an anticancer protein used to treat acute lymphoblastic leukemia. In this study, Salmonellae were engineered to express L-ASNase selectively within tumor tissues using the inducible araBAD promoter system of Escherichia coli. Antitumor efficacy of the engineered bacteria was demonstrated in vivo in solid malignancies. This result demonstrates the merit of bacteria as cancer drug delivery vehicles to administer cancer-starving proteins such as L-ASNase to be effective selectively within the microenvironment of cancer tissue.