Search

Acerola by-products (AB) have been used as raw material for extracting active compounds; however, there were no studies related to the use of the remaining acerola by-product (RAB) from this extraction. This portion still has fibers and can be used for the production of cellulose nanofibrils (CNFs); therefore, the main objective of this study was to evaluate the production of CNFs using AB and RAB and to investigate whether the extraction can be a treatment step before bleaching/acid hydrolysis. AB and RAB were characterized before and after being chemically treated (AB_CT and RAB_CT, respectively). The fibers extracted from the RAB showed the highest cellulose contents (RAB: 36.6 % and RAB_CT: 69.9 %), suggesting that the extraction process had an impact on by-product defibrillation. The same trends were observed for CNFs produced by acid hydrolysis. CNFs based on RAB showed higher yield (CNF_RAB: 25.2 % and CNF_RAB_CT: 24.2 %), higher crystallinity index (CNF_RAB: 68.3 % and CNF_RAB_CT: 71.7 %) and higher thermal stability compared to CNFs extracted from AB and AB_CT. This study proved that it is feasible to use by-products after removing the active compounds for CNF production without other pre-treatments or in association with chemical treatment to obtain more crystalline and thermally stable CNFs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Mechanical properties of biopolymer films can be a limitation for their application as packaging. Soybean straw crystalline nanocelluloses (NC) can act as reinforcement load to improve these material properties, and W/O/W double emulsion (DE) as encapsulating bioactive agents can contribute to produce active packaging. DE droplets were loaded with pitanga leaf (Eugenia uniflora L.) hydroethanolic extract. The mechanical, physicochemical, and barrier properties, and the microstructure of gelatin and/or chitosan films incorporated with NC or NC/DE were determined by classical methods. Film antioxidant activities were determined by ABTS and DPPH methods. The incorporation of NC/DE in gelatin and/or chitosan films (NC/DE films) changed the morphology of these films, which presented more heterogeneous air-side surfaces and cross-sections. They presented rougher topographies, notably greater resistance and stiffness, higher barrier properties to UV/Vis light and higher antioxidant activity than the NC films. Moisture content, solubility in water and water vapor permeability decreased due to the presence of DE. Overall, the NC/DE films improved all properties, when compared to the properties of NC films or those of films with only DE, from a previously published study. In spite of not having antimicrobial activity against the studied bacteria, NC/DE films did display a great antioxidant activity., (Copyright © 2021 Elsevier B.V. All rights reserved.)