Search

The daily use of cosmetics may expose consumers to localized skin problems and systemic effects caused by absorption of chemical elements. The requirements for suitable quality control and maximum limits for toxic and potentially toxic elements in cosmetics have attracted the attention of the scientific community and of the official institutions around the world. Maximum limits for chemical elements in some cosmetics have been set, but there are disagreements between them. In the same context, many analytical methods have been proposed in the literature, but several challenges during the sample preparation and determination steps related to the high complexity of cosmetics' matrices composition still remain. It is extremely difficulty to establish suitable methods, free of interference, even using modern technology. In this review, methods for determining toxic and potentially toxic elements in cosmetics used for make-up on the lips and on the eye area, covering the period since 2000, are presented. Techniques enabling direct analysis and those requiring a sample preparation step prior to the analysis are also discussed. This review focused on cosmetics for make-up on the lips and on the eye area because the risks of percutaneous absorption and oral ingestion of toxic and potentially toxic elements is higher than in other body regions., (Copyright © 2019 Elsevier B.V. All rights reserved.)

An effective analytical method for bromine and iodine determination in human hair using interference-free inductively coupled plasma mass spectrometry (ICP-MS) was developed. Human hair was digested based on combustion reaction to obtain compatible solutions with ICP-MS analysis. Using microwave-induced combustion (MIC), masses of human hair ranging from 50 to 300 mg were efficiently digested. Only a diluted alkaline solution (100 mmol L -1  NH 4 OH) was used for the absorption of both analytes, which was fully compatible with ICP-MS analysis. Using these conditions low limits of detection were obtained (LOD of 0.01 μg g -1 for Br and 0.004 μg g -1 for I). Recovery tests at two levels (50% and 100%) using a standard solution or mixtures of the sample with certified reference materials (CRMs) were carried out to evaluate the suitability of proposed method and recoveries between 94% and 102% were always obtained. Accuracy was evaluated by analysis of a human hair CRM, and the Br and I concentrations obtained by the proposed method did not differ significantly from those described in the certificate. Repeatability (RSDs ≤ 4%) and reproducibility (RSDs ≤ 7%) of the results using proposed method were always very suitable. The digests obtained using the MIC method were fully compatible with ICP-MS and the interferences currently found using conventional digestion methods were completely eliminated. Ultra-trace concentrations of Br and I were determined in human hair, demonstrating that the proposed method is a suitable strategy, and it presents several advantages compared to others published in the literature., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this work, an analytical method for bromine and iodine determination in human saliva was proposed. A simple protocol based on centrifugation and direct analysis of supernatant by inductively coupled plasma mass spectrometry (ICP-MS) was investigated. Although this method was feasible for bromine determination, iodine was partially present in the supernatant and an agreement about 54% with reference value was obtained. In addition, microwave-induced combustion (MIC) and microwave-assisted dissolution were also evaluated. Using MIC, 0.2 mL of saliva added on 300 mg of microcrystalline cellulose were efficiently digested. A diluted solution (50 mmol L -1 NH 4 OH) was used for analytes absorption, and a reflux step of 5 min was applied to ensure quantitative recoveries of Br and I. Accuracy was evaluated by analyte recovery experiments, and recoveries between 94% and 98% were obtained. Microwave-assisted dissolution was evaluated for 2.0 mL of saliva using also a diluted alkaline solution (25 mmol L -1 NH 4 OH) and a microwave irradiation program of 35 min (including the cooling step). Results for this method agreed with those obtained using MIC. Although MIC has also been appropriated for further determination of Br and I in saliva, microwave-assisted dissolution can be considered a simpler sample preparation method and it was effective for high amount of sample (up to 2.0 mL). Moreover, final solutions were compatible with ICP-MS analysis, allowing the quantification of Br and I in human saliva at ultra-trace concentrations (limits of quantification were 0.052 μg mL -1 for Br and 0.022 μg mL -1 for I)., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Responding to the need for green and efficient methods to determine catalyst residues with suitable precision and accuracy in samples with high fat content, the present work evaluates a microwave-assisted ultraviolet digestion (MW-UV) system for margarines and subsequent determination of Ni, Pd and Pt using inductively coupled plasma mass spectrometry (ICP-MS). It was possible to digest up to 500mg of margarine using only 10mL of 4molL -1 HNO 3 with a digestion efficiency higher than 98%. This allowed the determination of catalyst residues using the ICP-MS and free of interferences. For this purpose, the following experimental parameters were evaluated: concentration of digestion solution, sample mass and microwave irradiation program. The residual carbon content was used as a parameter to evaluate the efficiency of digestion and to select the most suitable experimental conditions. The accuracy evaluation was performed by recovery tests using a standard solution and certified reference material, and recoveries ranging from 94% to 99% were obtained for all analytes. The limits of detection for Ni, Pd and Pt using the proposed method were 35.6, 0.264 and 0.302ngg -1 , respectively. When compared to microwave-assisted digestion (MW-AD) in closed vessels using concentrated HNO 3 (used as a reference method for sample digestion), the proposed MW-UV could be considered an excellent alternative for the digestion of margarine, as this method requires only a diluted nitric acid solution for efficient digestion. In addition, MW-UV provides appropriate solutions for further ICP-MS determination with suitable precision (relative standard deviation < 7%) and accuracy for all evaluated analytes. The proposed method was applied to margarines from different brands produced in Brazil, and the concentration of catalyst residues was in agreement with the current legislation or recommendations., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this work, a method combining microwave-induced combustion (MIC) for sample preparation of commercial levothyroxine sodium (L-T 4 ) drugs (L-T 4 : 25-200µg/tablet), and potentiometry with ion selective electrode (ISE) for iodine determination and subsequent indirect quantification of L-T 4 was proposed. The type and concentration of the absorbing solution were evaluated to select the most suitable conditions for this study. Using the MIC method, it was possible to use solutions as diluted as 150mmolL -1 (NH 4 ) 2 CO 3 (for samples containing 25-200µg of L-T 4 /tablet) for I absorption. In these conditions, recoveries for L-T 4 were between 99% and 101%, and relative standard deviations were lower than 10%. The limit of detection for L-T 4 was 11.2µg/tablet, which is almost two times lower than the minimum concentration of L-T 4 in commercially available drugs. Thus, the MIC was suitable for the digestion of several L-T 4 drugs for subsequent I determination by ISE and indirect quantification of L-T 4 . Furthermore, the proposed method presents high throughput with low reagent consumption and consequently lower waste generation, making it suitable for routine determination of L-T 4 in drugs. From the obtained results, it was possible to observe that one of the analyzed samples is not in agreement with the limits established by the United States Pharmacopeia, indicating the importance of the drug quality control. The United States Pharmacopeia establishes that each tablet must contain between 90% and 110% of the amount of active substance declared by the manufacturer., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been established as a powerful and sensitive surface analytical technique for the determination of concentration and distribution of trace metals within biological systems at micrometer spatial resolution. LA-ICP-MS allows easy quantification procedures if suitable standard references materials (SRM) are available. In this work a new SRM-free approach of solution-based calibration method in LA-ICP-MS for element quantification in hair is described. A dual argon flow of the carrier gas and nebulizer gas is used. A dry aerosol produced by laser ablation (LA) of biological sample and a desolvated aerosol generated by pneumatic nebulization (PN) of standard solutions are carried by two different flows of argon as carrier or nebulizer gas, respectively and introduced separately in the injector tube of a special ICP torch, through two separated apertures. Both argon flows are mixed directly in the ICP torch. External calibration via defined standard solutions before analysis of single hair was employed as calibration strategy. A correction factor, calculated using hair with known analyte concentration (measured by ICP-MS), is applied to correct the different elemental sensitivities of ICP-MS and LA-ICP-MS. Calibration curves are obtained by plotting the ratio of analyte ion M(+)/(34)S(+) ion intensities measured using LA-ICP-MS in dependence of analyte concentration in calibration solutions. Matrix-matched on-line calibration in LA-ICP-MS is carried out by ablating of human hair strands (mounted on a sticky tape in the LA chamber) using a focused laser beam in parallel with conventional nebulization of calibration solutions. Calibrations curves of Li, Na, Mg, Al, K, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, Sr, Mo, Ag, Cd, I, Hg, Pb, Tl, Bi and U are presented. The linear correlation coefficients (R) of calibration curves for analytes were typically between 0.97 and 0.999. The limits of detection (LODs) of Li, V, Mn, Ni, Co, Cu, Sr, Mo, Ag, Ba, Cd, I, Hg, Pb, Bi and U in a single hair strand were in the range of 0.001-0.90 μg g(-1), whereas those of Cr and Zn were 3.4 and 5.1 μg g(-1), respectively. The proposed quantification strategy using on-line solution-based calibration in LA-ICP-MS was applied for biomonitoring (the spatial resolved distribution analysis) of essential and toxic metals and iodine in human hair and mouse hair., (Copyright © 2010 Elsevier B.V. All rights reserved.)