Search

Significant attention is focused on mushrooms and mushroom protein hydrolysates owing to their sustainability and nutritional profile with different uses in diverse industries. This review examines the composition, functional properties, production methods and applications of mushroom protein hydrolysates. It commenced with a brief overview of protein hydrolysates where their importance and applications in food, pharmaceutical, cosmetic, and agricultural industries were explored. The significance of mushrooms as alternatives to animal proteins applicable to producing protein hydrolysates was discussed. Methods including conventional (chemical and enzymatic) extraction, ultrasound-assisted and microwave-assisted extractions used to extract proteins during protein hydrolysates production were discussed. Using enzyme-assisted-ultrasound-extraction to enhance protein extraction efficiency is exclusively highlighted as a promising technique. To obtain enhanced protein yield and quality, and protein hydrolysates with desired characteristics, crucial factors consisting of pH, temperature, extraction time, solvent type, enzyme concentration and ratio-of-substrate-concentration need to be optimized. The physicochemical and functional properties of mushroom protein hydrolysates are summarized. Variability of mushroom species, extraction efficiency, enzyme selection and cost, standardization, and consumer perception which constitute challenges and limitations for production and application of mushroom protein hydrolysates are addressed. Research should be conducted to optimize extraction and hydrolysis processes and explore new mushroom species.

Dragon fruit is gaining its popularity in all over the world. The seed of the dragon fruit is highly nutritious in terms of essential fatty acid. The utilization of seed oils is getting increasingly common these days. In this work, a comparative analysis was undertaken for control and microwave-assisted extraction (MAE) samples, using the RSM-CCD (Response Surface Methodology – Central composite Design) design, to determine the influences power and time on dragon fruit seed oil's Yield, PV, DPPH, and polyphenol content. The optimization was done, where the extraction yield (34.30 %), PV (3.23 me quiiv O2/kg), DPPH (69.65 %), and polyphenol (96.71 mg GAE/g) was observed. While comparing with the control sample the antioxidant activity of the seed oil in terms of (%DPPH, FRAP and ORAC) was better in microwave treated sample. The saturated fatty acid is 25 % with a monounsaturated fatty acid 20 % and Polyunsaturated fatty acid of 55 %. High amount of tocopherol content was determined having 93 % of γ -tocopherol. Dragon fruit seed oil has the possibility to be a good source for the functional components in the near future due to the presence of antioxidant compounds and essential fats.

Gelatine is frequently used as a food ingredient. However, Indonesia imports almost all of its gelatine, totaling 3990152 tons annually. Gelatine could be replaced with glucomannan compound which was found in porang tubers. However, it also contains calcium oxalate, which is harmful for the human body. In this study, calcium oxalate was first eliminated by the purification process using 10 % NaCl (w/w). Moreover, the microwave-assisted extraction method was used to extract the glucomannan compound by applying 300 W of microwave power with different extraction times (5, 10, 15, and 20 min) and different ethanol concentrations (60, 70, 80, and 96 %). Statistical analysis was used to optimize and identify significant parameters influencing the glucomannan concentration. The best conditions for glucomannan extraction were an extraction time of 10 min and an ethanol concentration of 80 % (v/v), resulting in a glucomannan yield of ≥96 %. Machine learning was successfully applied for data modelling using a Long Short-Term Memory block with an average R-square of 0.9772 (97.72 % accuracy) and an average MSE of 4.7719. Furthermore, physical and chemical characteristics of the extracted porang flour were accorded with SNI gelatine standards 06–3735 in 1995, which consisted of glucomannan (96.359 ± 1.164 %), calcium oxalate (0.009 ± 0.001 %), water (2.290 ± 0.986 %), ash (0.018 ± 0.002 %), fat (0.0235 ± 0.120 %), heavy metals (not identified), and pH (6.455 ± 0.191). Finally, the extracted glucomannan can be used as a potential regional substitute for gelatine production.

Oaks (Quercus L., Fagaceae) are a widespread tree species worldwide, and in Hungary they account for nearly 30 % of the forests. Their wood is valuable, but their bark is considered as a by-product. Oak bark, available in large quantities but with no dedicated use, contains a significant amount of valuable extractives. Its (+)-catechin content is around 1 %. (+)-Catechin is mostly used for food industry, medicine and many other industrial purposes, representing a significant financial value. The aim of the present research was to compare the (+)-catechin concentrations in the bark of the most important oak species found in Hungary and to optimize sample pretreatment (conservation) and extraction methods in order to achieve fast and efficient extraction. From these species the highest concentrations were measured in Q. robur and Q. robur ssp. slavonica (8–12 mg (+)-catechin/g dry bark). The combination of microwave sample pretreatment and microwave assisted extraction proved to be the most time- and cost-effective method. The utilization of the extracted bark powder for energetic purposes requires further investigations.

Green extractive methods accompanied by resource conservation through process optimization are important in working towards sustainable processes. In the present paper, rutin was extracted from the leaf of female Carica papaya Linn using microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), sequential microwave ultrasound-assisted extraction (MUAE), and sequential ultrasound microwave-assisted extraction (UMAE) methods. Subsequently, the effect of extraction parameters on rutin yield were analyzed and compared. In addition, the extraction efficiency and energy consumption of the extraction processes were measured and discussed. In the present study, solid-liquid (S/L) ratio was determined to be the most significant extraction variable. Under optimized conditions, MUAE and UMAE were determined to yield the highest amount of rutin extracted at 18.46 ± 0.64 mg/g and 18.43 ± 0.81 mg/g, respectively. However, MUAE was determined to be the least resource efficient method as it consumed the highest amount of energy due to its relatively long extraction time. UAE was determined to be the most efficient in resource utilization as it required the least amount of energy for every mg/g of yield extracted, while the yield obtained was, nonetheless, comparatively high. The optimal condition obtained for UAE was 20 min of ultrasonic extraction time (TU), 20 % of ethanol mixture concentration (C), 710 μm of particle size (S), and 1:650 wt/wt of solid-liquid (S/L) ratio (R).

From the recent market trend, there is a huge demand for the bioactive compounds from various food matrices that could be capable enough to combat the emerging health effects in day-to-day life. Fenugreek is a well-known spice from ancient times for its medicinal and health benefits. In the present study, two methods of green extraction microwave (MAE) and ultrasound (UAE) assisted were studied in regard of extraction of fenugreek diosgenin. In this study, solvent type (acetone, ethanol, hexane and petroleum ether), solvent concentration (40, 60, 80 and 100%) and treatment time (1.5, 3.0, 4.5 and 6.0 min and 30, 40, 50 and 60 min for MAE and UAE method respectively) was varied to observe the effect of these parameters over extract yield and diosgenin content. The results of this study revealed that treatment time, type of solvent and its concentration and method adopted for extraction of diosgenin has significant effect. In relation with better yield extract and diosgenin content, the yield of fenugreek seed extract was 7.83% with MAE and 21.48% with UAE of fenugreek seed powder at 80% ethanol concentration at 6 and 60 min respectively. The content of diosgenin was observed in fenugreek seed powder extract was 35.50 mg/100 g in MAE and 40.37 mg/100 g in UAE with 80% ethanol concentration at 6 and 60 min respectively. The overall range of yield of fenugreek extract was varied from 1.04% to 32.48% and diosgenin content was 15.82 mg/100 g to 40.37 mg/100 g of fenugreek seed powder including both extraction methods. This study revealed that UAE would impose better ways for preparing fenugreek extract and observing diosgenin content from fenugreek seeds.

Crude extracts of fresh Dendrobium Sonia ‘Earsakul’ orchid flowers (DSE) were prepared using microwave assisted extraction (MAE; using household microwave oven) and hot water extraction (HWE; at constant 80 °C). The obtained DSEs were measured their absorbance at λmax of 543 and 583 nm and determined their total monomeric anthocyanin contents (TAC). Mathematical models of MAE of Dendrobium Sonia ‘Earsakul’ orchid flower were constructed using response surface methodology - Box-Behnken design. Studied parameters included flower to water ratio, microwave power, and extraction time, with absorbance at λmax as response. The data generated were 1) visible spectrum (400–700 nm) of DSE; 2) absorbance values at λmax and 3) TAC of DSEs obtained from various extraction conditions of MAE and HWE; 4) linear equations describing correlations between TAC and absorbance at λmax of DSEs; and 5) mathematical models of MAE of Dendrobium Sonia ‘Earsakul’ orchid.

Microwave hydrothermal treatment was selected to extract valuable fractions with bioactive and gelling properties from Evernia prunastri lichen with potential for topical applications. The impact of the extraction processing conditions on the soluble extracts, mucilage fraction and residual solid phase was analyzed within a lichen global valorization approach. A particular stress was made on the thermo-rheological and structural characteristics of the extracted glucan and galactomannan polymers, the corresponding gelled matrices, and their cosmetic feasibility. Results revealed that the proposed microwave-assisted treatment showed a relevant influence on the phytochemical features of the aqueous soluble extracts, accounting the major protein content at 120 °C and the enhanced antioxidant and anti-tyrosinase properties at 140 °C. Extracts at 200 °C showed the highest anti-inflammatory (COX-1 and COX-2 inhibition) efficacies. The biopolymer analyses indicated that those recovered after lichen hydrothermal treatment at 160 °C featured a good extraction performance, the highest molecular weight, apparent viscosity, and antiproliferative potential. The thermo-rheological properties of the corresponding matrices formulated at 10 % and 60 or 80 °C exhibited the strongest and most thermo-reversible characteristics, as well as antifreezing feasibility. Another advantage of the selected fractions was the absence of skin irritation according to the in vitro skin irritation assay., Competing Interests: Declaration of competing interest The corresponding author on behalf of all the authors of the manuscript declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

To highlight the shortcomings in conventional methods of extraction, this study investigates the efficacy of Microwave Assisted Extraction (MAE) toward bioactive compound recovery from pharmaceutically-significant medicinal plants, Adathoda vasica and Cymbopogon citratus. Initially, the microwave (MW) drying behavior of the plant leaves was investigated at different sample loadings, MW power and drying time. Kinetics was analyzed through empirical modeling of drying data against 10 conventional thin-layer drying equations that were further improvised through the incorporation of Arrhenius, exponential and linear-type expressions. 81 semi-empirical Midilli equations were derived and subjected to non-linear regression to arrive at the characteristic drying equations. Bioactive compounds recovery from the leaves was examined under various parameters through a comparative approach that studied MAE against Soxhlet extraction. MAE of A. vasica reported similar yields although drastic reduction in extraction time (210 s) as against the average time of 10 h in the Soxhlet apparatus. Extract yield for MAE of C. citratus was higher than the conventional process with optimal parameters determined to be 20 g sample load, 1:20 sample/solvent ratio, extraction time of 150 s and 300 W output power. Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy were performed to depict changes in internal leaf morphology.

Antibiotics are a group of drugs used for the treatment of bacterial diseases. They are used in both human and veterinary medicine and, although they are not permitted, they are sometimes used as growth promoters. The present research compares two extraction techniques: ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE) in order to evaluate their efficiency in the determination of 17 usually prescribed antibiotics in human nails. The extraction parameters were optimized using multivariate techniques. Once both techniques were compared, MAE was selected as optimal due to its greater experimental practicability together with the better extraction efficiencies it provides. Target analytes were detected and quantified by ultra-high performance liquid chromatography with tandem mass spectrometry detection (UHPLC-MS/MS). The run time was 20 min. The methodology was then successfully validated, obtaining acceptable analytical parameters according to the guide used. Limits of detection were between 0.3 and 3 ng g -1 and limits of quantification were in the range from 1.0 to 4.0 ng g -1 . Recovery percentages ranged from 87.5% to 114.2%, and precision (in terms of standard deviation) was less than 15% in all cases. Finally, the optimized method was applied to nails taken from 10 volunteers and the results revealed the presence of one or more antibiotics in all the samples examined. The most commonly found antibiotic was sulfamethoxazole, followed by danofloxacin and levofloxacin. The results demonstrated, on the one hand, the presence of these compounds in the human body and, on the other hand, the suitability of nails as a non-invasive biomarker of exposure., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The intention of current work is to recover/extract polysaccharide from jamun fruit seeds (waste) by microwave assisted solid-liquid extraction (MAE) technique using four-factor (microwave power (MWP), pH, time (MWT) and solid to liquid (SL) ratio) five-level central composite rotatable experimental design (CCRED). The observed data was evaluated by statistically and a mathematical model (polynomial) was developed to predict the polysaccharide yield. Numerical optimization technique is used to attain the ideal optimal condition (microwave power of 515 w, pH of 3.2, MWT of 3.1 min and SL ratio of 1:15 g/ml) to retrieve maximal yield of polysaccharide and attained optimal condition was experimentally validated. The experimental yield of polysaccharide (4.71 ± 0.02%) was matched with predicted value (4.72%). Physico-chemical properties of the polysaccharide extracted at optimal condition was investigated. Fourier Transform Infrared Spectroscopy (FTIR) evaluation were carried out in this study to characterize the polysaccharide. Scanning Electron Microscopy (SEM) was also utilized to reveal the morphology of raw and extracted plant sample., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this work, a quick, facile and efficient approach was presented for green synthesis of cadmium telluride quantum dots (CdTe QDs) based on an aqueous extract of the Ficus johannis plant. Two extraction methods involving microwave assisted extraction (MWAE; 90 and 270 w; 15 min) and ultrasonic assisted extraction (USAE; 15 min; 45 °C) were performed as eco-friendly, effective, green and fast techniques for the extract preparation of the fruit's plant. The as-prepared plant extracts were used as natural stabilizing precursors in the synthesis of CdTe QDs. The synthesized QDs were characterized using various techniques. The average particle size of the QDs from the X-ray diffraction patterns was calculated to be 1.2 nm. UV-Vis absorption and fluorescence spectroscopic studies show a wide absorption band from 400 to 425 nm and a maximum emission peak around 470 nm, which confirmed the successful synthesis of CdTe QDs via the applied synthetic method. After synthesis and characterization of the samples, the antimicrobial properties, genotoxicity, toxicity and antifungal activities of the as-prepared CdTe QDs were investigated. In addition, antioxidant properties of the samples (QDs and extracts), were evaluated by different antioxidant assays. The results indicate the significant antimicrobial activity of the extract and CdTe QDs samples, with negligible toxicity and genotoxicity impacts., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Flos Lonicerae was an important Chinese medicine. In this research, a microwave assisted extraction method was applied for the extraction of chlorogenic acid from Flos Lonicerae. The operating conditions were optimized using a Box-Behnken design test. Under the optimal conditions, the extraction yield of chlorogenic acid reached 32.52 ± 1.31 mg/g. Next, a direct analysis in real time mass spectrometry (DART-MS) method was utilized to quantify of chlorogenic acid in Flos Lonicerae extracts. The primary parameters were optimized to obtain maximum signal intensity. In the detection process of the actual samples, the results obtained by DART-MS are consistent with those obtained by HPLC method with short detection time and acceptable repeatability and precision (<15%). In addition, the DART-MS/MS method has several advantages, such as speed, low cost and simplicity. Therefore, the DART-MS method is an efficient method that can be applied in the quantification of chlorogenic acid in Flos Lonicerae., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This work was chiefly encouraged by the continuous consumption of antibiotics which eventually pose harmful effects on animals and human beings when present in water systems. In this study, the activated carbon (AC) was used as a solid phase material for the removal of sulfamethoxazole (SMX) in wastewater samples. The microwave assisted solid phase extraction (MASPE) as a sample extraction method was employed to better extract SMX in water samples and finally the analysis of SMX was done by the UV-Vis spectrophotometer. The microwave assisted solid phase extraction method was optimized using a two-level fractional factorial design by evaluating parameters such as pH, mass of adsorbent (MA), extraction time (ET), eluent ratio (ER) and microwave power (MP). Under optimized conditions, the limit of detection (LOD) and limit of quantification (LOQ) were 0.5μgL -1 and 1.7μgL -1 , respectively, and intraday and interday precision expressed in terms of relative standard deviation were >6%.The maximum adsorption capacity was 138mgg -1 for SMX and the adsorbent could be reused eight times. Lastly, the MASPE method was applied for the removal of SMX in wastewater samples collected from a domestic wastewater treatment plant (WWTP) and river water., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In constructed wetlands micropollutants can be removed from water by phytoremediation. However, micropollutant uptake and metabolism by plants here is poorly understood due to the lack of good analytical approaches. Reported herein is the first methodology developed and validated for the multi-residue determination of 81 micropollutants (pharmaceuticals, personal care products and illicit drugs) in the emergent macrophyte Phragmites australis. The method involved extraction by microwave accelerated extraction (MAE), clean-up using off-line solid phase extraction and analysis by ultra-high-performance liquid chromatography tandem mass spectrometry. Development of the MAE method found the influence of studied variables on micropollutant recovery to be: extraction temperature > sample mass > solvent composition. Validation of the developed extraction protocol revealed method recoveries were in the range 80-120% for the majority of micropollutants. Method quantitation limits (MQLs) were generally <5 ng g -1 dry weight demonstrating the sensitivity of the methodology. Application of the method to P. australis from a constructed wetland used to treat trickling filter effluent found 17 micropollutants above their MQL, up to concentrations of 200 ng g -1 . Other than uptake, the presence of several metabolites (carbamazepine 10,11 epoxide, desvenlafaxine, 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine, N-desmethyltramadol and norketamine) indicated metabolism within the plant may also occur. This new analytical methodology will enable a process mass balance of the constructed wetland to be attained for the first time, and thus help understand the role of phytoremediation in micropollutant removal by such systems., (Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.)

Reported herein is new analytical methodology for the determination of 90 emerging contaminants (ECs) in liquid environmental matrices (crude wastewater, final effluent and river water). The application of a novel buffer, ammonium fluoride improved signal response for several ECs determined in negative ionisation mode. Most notably the sensitivity of steroid estrogens was improved by 4-5 times in environmental extracts. Method recoveries ranged from 40 to 152% in all matrices and method quantitation limits (MQLs) achieved were <1ngL(-1) for numerous ECs. Development of a microwave assisted extraction (MAE) protocol as an additional sample extraction step for solid matrices enabled 63 ECs to be simultaneously analysed in digested sludge. To the authors knowledge this is considerably more than any previously reported MAE method. Here, MQLs ranged from 0.1-24.1ngg(-1) dry weight. The application of MAE offers several advantages over pressurized liquid extraction including faster sample preparation, lower solvent requirements, and the ability to perform several extractions simultaneously as well as lower purchasing and running costs. To demonstrate the method's sensitivity, application to environmental samples revealed 68 and 40 ECs to be above their respective MQL in liquid environmental samples and digested sludge, respectively. To date, this is the most comprehensive multi-residue analytical method reported in the literature for the determination of ECs in both liquid and solid environmental matrices., (Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.)

Monosaccharides are the fundamental composition units of saccharides which are a common source of energy for metabolism. An effective and simple method consisting of microwave assisted extraction (MAE), solid phase extraction (SPE) and high performance liquid chromatography-refractive index detector (HPLC-RID) was developed for rapid detection of monosaccharides in plants. The MAE was applied to break down the structure of the plant cells and release the monosaccharides, while the SPE procedure was adopted to purify the extract before analysis. Finally, the HPLC-RID was employed to separate and analyze the monosaccharides with amino column. As a result, the extraction time was reduced to 17 min, which was nearly 85 times faster than soxhlet extraction. The recoveries of arabinose, xylose, fructose and glucose were 85.01%, 87.79%, 103.17%, and 101.24%, with excellent relative standard deviations (RSDs) of 1.94%, 1.13%, 0.60% and 1.67%, respectively. The proposed method was demonstrated to be efficient and time-saving, and had been applied to analyze monosaccharides in tobacco and tea successfully., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Microwave assisted extraction (MAE) followed by microplate solid phase extraction (MPSPE) coupled with ultra high performance liquid chromatography (UHPLC) for the semi-quantitative determination of colchicine, 3-demethyl colchicine and 2-demethyl colchicine in postmortem rat bone is described. Rats (n=4) received 50mg/kg colchicine (i.p), and euthanized by CO2 asphyxiation. Remains decomposed to skeleton outdoors and vertebral bones were collected cleaned, and ground to a fine powder. Powdered bone underwent MAE using methanol in a closed microwave system, followed by MPSPE and analysis using UHPLC-PDA. MAE analyte stability was assessed and found to be stable for at least 60 min irradiation time. The majority (>95%) of each analyte was recovered after 15 min. The MPSPE-UHPLC method was linear between 10 and 2,000 ng/mL, with coefficients of variation <20% in triplicate analysis, with a limit of detection of 10 ng/mL for each of the three analytes. Following MAE for 30 min (80°C, 1200W), MPSPE-UHPLC analysis of vertebral bone of colchicine-exposed rats detected colchicine (1.8-4.1 μg/g), 3-demethyl colchicine (0.77-1.8 μg/g) and 2-demethyl colchicine (0.43-0.80 μg/g) in all samples assayed., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The distribution of 15 phthalate acid esters (PAEs) in water, sediment and suspended particle samples from representative lakes of Beijing was investigated and its relationship with anthropogenic activities was also assessed. The sample preparation and analysis methods for PAEs, using solid-phase extraction or microwave assisted extraction coupled with gas chromatography-mass spectrometry, were developed to achieve the satisfactory detection limits and recoveries. The analysis results indicated occurrences of most target PAEs were widespread in the researched lakes with the total PAE concentrations ranged from 0.386 to 3.184 μg/L in water, from 52.6 to 8216.4 ng/g dry weight in sediments and from 138.7 to 2052.4 μg/g dry weight in suspended particles. Di-(2-ethylhexyl) phthalate and di-butyl phthalate were the predominant PAEs, frequently being detected in all matrices, followed by di-iso-butyl phthalate and butyl benzyl phthalate. It was also found that anthropogenic activities were associated with the spatial distribution of phthalates in sediments considering its relationship with population distribution characteristics of Beijing., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Focused-ultrasound solid-liquid extraction was developed for the extraction of polybrominated diphenyl ethers in vegetables and amended soil. Firstly, solid-phase extraction clean-up using 2g and 5 g of Florisil and 2-g silica cartridges were evaluated and elution profile was also optimised. Similar recoveries were obtained for most compounds while better recoveries were obtained for 5-g Florisil in the case of the heavier PBDEs. FUSLE extraction time (2 min) guaranteed quantitative extraction of the target analytes in the four studied matrices (69-130%). Method detection limit values were in the range of 1-5 ng g(-1) for splitless injection in a gas chromatograph coupled to a mass spectrometer and no significant improvement was obtained for large volume injection. Relative standard deviation values were between 1% and 30%. Recoveries obtained using FUSLE were compared with those obtained with microwave assisted extraction and the developed method was also applied to a certify reference material of polybrominated diphenyl ethers and polychlorinared biphenyls in sediment. Similar values were obtained in the case of carrot and pepper matrices (77-130% for FUSLE and 77-112% for MAE). However, MAE provided extraction recoveries higher than 100% for most of the BDE congeners in lettuce and amended soil., (© 2013 Elsevier B.V. All rights reserved.)

Metabolomics, one of the most recently emerged "omics", has taken advantage of ultrasound (US) to improve sample preparation (SP) steps. The metabolomics-US assisted SP step binomial has experienced a dissimilar development that has depended on the area (vegetal or animal) and the SP step. Thus, vegetal metabolomics and US assisted leaching has received the greater attention (encompassing subdisciplines such as metallomics, xenometabolomics and, mainly, lipidomics), but also liquid-liquid extraction and (bio)chemical reactions in metabolomics have taken advantage of US energy. Also clinical and animal samples have benefited from US assisted SP in metabolomics studies but in a lesser extension. The main effects of US have been shortening of the time required for the given step, and/or increase of its efficiency or availability for automation; nevertheless, attention paid to potential degradation caused by US has been scant or nil. Achievements and weak points of the metabolomics-US assisted SP step binomial are discussed and possible solutions to the present shortcomings are exposed., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Broccoli (Brassica oleracea L. var. Italica) contains substantial amount of health-promoting compounds such as vitamins, glucosinolates, phenolic compounds, and dietary essential minerals; thus, it benefits health beyond providing just basic nutrition, and consumption of broccoli has been increasing over the years. This review gives an overview on the extraction and separation techniques, as well as the biological activity of some of the above mentioned compounds which have been published in the period January 2008 to January 2013. The work has been distributed according to the different families of health promoting compounds discussing the extraction procedures and the analytical techniques employed for their characterization. Finally, information about the different biological activities of these compounds has been also provided., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Persistent organic pollutants (POPs) are major environmental concern due to their persistence, long-range transportability, bio-accumulation and potentially adverse effects on living organisms. Analytical chemistry plays an essential role in the measurement of POPs and provides important information on their distribution and environmental transformations. Much effort has been devoted during the last two decades to the development of faster, safer, more reliable and more sensitive analytical techniques for these pollutants. Since the Stockholm Convention (SC) on POPs was adopted 12 years ago, analytical methods have been extensively developed. This review article introduces recent analytical techniques and applications for the determination of POPs in environmental and biota samples, and summarizes the extraction, separation and instrumental analyses of the halogenated POPs. Also, this review covers important aspects for the analyses of SC POPs (e.g. lipid determination and quality assurance/quality control (QA/QC)), and finally discusses future trends for improving the POPs analyses and for potential new POPs., (Copyright © 2013 Elsevier B.V. All rights reserved.)