Search

Sewage treatment plants (STPs) are considered as a prominent source for releasing microplastics (MPs) into the riverine systems. Though MPs abundance and removal efficacy in different secondary treatment technique-based STPs have been extensively studied worldwide, such studies are scarce in Indian conditions. Herein, this study comprehensively assesses MPs abundance, characterization, and their removal in the selected secondary treatment technique-based STPs discharging into the middle stretch of the Ganga River in India. MPs concentration (n/L) in influent and effluent of the STPs varied between 42 ± 10 to 150 ± 19 and 3 ± 1 to 22 ± 5, respectively. Overall, the primary treatment stage was observed to remove MPs by 23-42 %, while the secondary treatment stage removed MPs by 67-90 %. Selected technique-based STPs exhibited varying MPs removal efficacies as follows: SBR (94 %), TF (90 %), AL (88 %), UASB (87 %), ASP (85 %), FAB (84 %), and Bio-tower (77 %). MPs ranging from 50 to 250 μm were the dominant sizes, with PP, PE, and PS being the prevalent polymers. The Ganga River receives about 3 × 10 8 MPs/day from STP effluents, and an estimated 4.5 × 10 7 MPs/day are released via the sludge. This comprehensive assessment of MPs abundance and removal from different technology-based Indian STPs will allow the comparison of the generated dataset with similar studies worldwide., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this manuscript., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Coagulation-flocculation-sedimentation (CFS) system has been identified as one of the favored treatment technique in water/wastewater treatment systems and hence, it is crucial to comprehend the efficacy of different coagulants used in removing microplastics (MPs) from aqueous matrices. Henceforth, this study critically reviews the recent progress and efficacy of different coagulants used to date for MPs removal. This includes laboratory and field-scale studies on inorganic and organic coagulants, as well as laboratory-scale studies on natural coagulants. Inorganic and organic coagulants have varying MPs removal efficiencies such as: Fe/Al-salts (30 %-95 %), alum (99 %), and poly aluminum chloride (13 %-97 %), magnesium hydroxide (84 %), polyamine (99 %), organosilanes (>95 %), and polyacrylamide (85 %-98 %). Moreover, studies have highlighted the use of natural coagulants, such as chitosan, protein amyloid fibrils, and starch has shown promising results in MPs removal with sevral advantages over traditional coagulants. These natural coagulants have demonstrated high MPs removal efficiencies with chitosan-tannic acid (95 %), protein amyloid fibrils (98 %), and starch (>90 %). Moreover, the MPs removal efficiencies of natural coagulants are compared and their predominant removal mechanisms are determined. Plant-based natural coagulants can potentially remove MPs through mechanisms such as polymer bridging and charge neutralization. Further, a systematic analysis on the effect of operational parameters highlights that the pH affects particle surface charge and coagulation efficiency, while mixing speed affects particle aggregation and sedimentation. Also, the optimal mixing speed for effective MPs removal depends on coagulant type and concentration, water composition, and MPs characteristics. Moreover, this work highlights the advantages and limitations of using different coagulants for MPs removal and discusses the challenges and future prospects in scaling up these laboratory studies for real-time applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this manuscript., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Evidence of atmospheric microplastics (MPs) deposition in India is scarce though reports of MPs pollution in other environmental media exist. Henceforth, this study for the first time examines and compares the abundance, characteristics, transport, and source analysis of atmospheric MPs in the urban and peri-urban areas of Patna city, Bihar, India. Wet atmospheric fallout samples were collected and analyzed for MPs deposition rate. The results showed that the mean MPs concentrations at each site were 1959.6 ± 205 (urban) and 1320.4 ± 126 (peri-urban) MPs/m 2 /day. The deposited MPs were mainly transparent fibers and fragments with a mean size of 347.9 ± 189.2 µm. Polyethylene terephthalate and polypropylene were the most abundant polymer found at both sites. Morphological characteristics revealed surface degradation and deposition of metal contaminants on the identified MPs. Meteorological parameters (wind direction and rainfall intensity) were significantly associated with the distribution of atmospheric MPs in the study area. The cluster mean backward trajectory suggested vehicular emissions, construction activities, and waste mismanagement as the potential sources of MPs. Findings of the present work necessitates future studies in gaining a deeper understanding of the fate, movement, and potential health hazards associated with atmospheric MPs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Groundwater security is a pressing environmental and societal issue, particularly due to significantly increasing stressors on water resources, including rapid urbanization and climate change. Groundwater arsenic is a major water security and public health challenge impacting millions of people in the Gangetic Basin of India and elsewhere globally. In the rapidly developing city of Patna (Bihar) in northern India, we have studied the evolution of groundwater chemistry under the city following a three-dimensional sampling framework of multi-depth wells spanning the central urban zone in close proximity to the River Ganges (Ganga) and transition into peri-urban and rural areas outside city boundaries and further away from the river. Using inorganic geochemical tracers (including arsenic, iron, manganese, nitrate, nitrite, ammonium, sulfate, sulfide and others) and residence time indicators (CFCs and SF 6 ), we have evaluated the dominant hydrogeochemical processes occurring and spatial patterns in redox conditions across the study area. The distribution of arsenic and other redox-sensitive parameters is spatially heterogenous, and elevated arsenic in some locations is consistent with arsenic mobilization via reductive dissolution of iron hydroxides. Residence time indicators evidence modern (<~60-70 years) groundwater and suggest important vertical and lateral flow controls across the study area, including an apparent seasonal reversal in flow regimes near the urban center. An overall arsenic accumulation rate is estimated to be ~0.003 ± 0.003 μM.yr -1 (equivalent to ~0.3 ± 0.2 μg.yr -1 ), based on an average of CFC-11, CFC-12 and SF 6 -derived models, with the highest rates of arsenic accumulation observed in shallow, near-river groundwaters also exhibiting elevated concentrations of nutrients including ammonium. Our findings have implications on groundwater management in Patna and other rapidly developing cities, including potential future increased groundwater vulnerability associated with surface-derived ingress from large-scale urban abstraction or in higher permeability zones of river-groundwater connectivity., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

The presence of arsenic (As) and other inorganic contaminants in groundwater is a key public health issue in India and many other parts of the world. Whilst a broad range of remediation technologies exist, performance can be highly variable, and appropriate selection and management of remediation approaches remains challenging. Here, we have identified and tested the performance of a range of small-scale remediation technologies (e.g. sand filters, multi-stage filtration and reverse osmosis (RO)-based systems; n = 38) which have been implemented in Bihar, India. We have undertaken spot-assessments of system performance under typical operating conditions in household and non-household (e.g. community, hospital, hostel/hotel) settings. The removal of As and other inorganic contaminants varied widely (ranging from ~0-100%), with some solutes generally more challenging to remove than others. We have evaluated the relative importance of technology type (e.g. RO-based versus non-RO systems), implementation setting (e.g. household versus non-household) and source water geochemistry (particularly concentrations and ratios of As, Fe, P, Si and Ca), as potential controls on remediation effectiveness. Source water composition, particularly the ratio ([Fe] - 1.8[P])/[As], is a statistically significant control on As removal (p < 0.01), with higher ratios associated with higher removal, regardless of technology type (under the site-specific conditions observed). This ratio provides a theoretical input which could be used to identify the extent to which natural groundwater composition may be geochemically compatible with higher levels of As removal. In Bihar, we illustrate how this ratio could be used to identify spatial patterns in theoretical geochemical compatibility for As removal, and to identify where additional Fe may theoretically facilitate improved remediation. This geochemical approach could be used to inform optimal selection of groundwater remediation approaches, when considered alongside other important considerations (e.g. technical, managerial and socio-economic) known to impact the effective implementation and sustainability of successful groundwater remediation approaches., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

The COVID-19 pandemic has reemphasized the indispensable role of plastics in our daily life. Plastics in terms of personal protective equipment (PPEs) and other single-use medical equipment along with packaging solutions owing to their inherent properties have emerged as a life-savior for protecting the health and safety of the frontline health workers and the common citizens during the pandemic. However, plastics have been deemed as evil polluter due to their indiscriminate littering and mismanagement amid increased plastic usage and waste generation during this unprecedented crisis. This article reviews and assesses to dwell upon whether plastics in the time of pandemic are acting as protector of the public health or polluter of the environment. Considering the utilities and limitations of plastic along with its management or mismanagement, and the fate, an equitable appraisal suggests that the consumers' irresponsible behavior, and attitude and poor awareness, and the stress on waste management infrastructure in terms of collection, operation, and financial constraints as the major drivers, leading to mismanagement, turn plastic into an evil polluter of the environment. Plastic can be a protector if managed properly and complemented by the circular economy strategies in terms of reduction, recycle and recovery, and thereby preventing leakage into the environment. To safeguard the supply chain of PPEs, several decontamination techniques have been adopted worldwide ensuring their effective reprocessing to prioritize the circular economy within the system. Policy guidelines encouraging to adopt safer practices and sustainable technical solutions along with consumers' education for awareness creation are the need of the hour for preventing plastic to turn from protector with high utility to polluter., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this manuscript., (Copyright © 2020 Elsevier B.V. All rights reserved.)