Search

The aim of the study was to assess non-occupational and occupational exposure to bisphenol compounds in Finland. The participants were 151 non-occupationally exposed volunteers and 15 potentially exposed employees of a sewage-pipe relining company and a floor-coating company. The following chemicals were measured in the urine samples: bisphenol A (BPA), bisphenol F (BPF), bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE), and the metabolites of the latter two [bisphenol A (2,3-dihydroxypropyl) glycidyl ether (BADGE·H 2 O), bisphenol A bis(2,3-dihydroxypropyl) ether (BADGE·2 H 2 O), bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) ether (BADGE·HCl·H 2 O), bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether (BADGE·HCl), and bisphenol A bis(3-chloro-2-hydroxypropyl) ether (BADGE·2HCl) and bisphenol F bis(2,3-dihydroxypropyl) ether (BFDGE·2 H 2 O), and bisphenol F bis(3-chloro-2-hydroxypropyl) ether (BFDGE·2HCl)]. BADGE and BFDGE were also measured in breathing zone air samples and hand-wipe samples of the sewage-pipe relining and floor-coating workers. Non-occupational exposure to BPA has decreased in Finland. The BPF level of the non-occupationally exposed was higher than the respective levels reported in the recent literature. BPA and BPF concentrations in the workers' urine samples were in the same range as those in the corresponding concentrations of the non-occupationally exposed population. Higher concentrations of BADGE and BFDGE metabolites were found in some of the workers' urine samples. Elevated urine concentrations were also observed in the samples collected the next morning. Some of the urinary BADGE and BFDGE metabolite results correlated with the hand-wipe results. The results show that occupational exposure to BADGE and BFDGE may occur in sewage-pipe relining and floor-coating work. They also indicate that dermal contamination plays a role in total exposure. Although the measured urinary levels indicate that the absorption of these bisphenol compounds are unlikely to pose a systemic health risk, the risk of dermal sensitization remains., Competing Interests: Declaration of Competing Interest The authors declare no conflicts of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

E-waste recycling is an increasingly important activity that contributes to reducing the burden of end-of-life electronic and electrical apparatus and allows for the EU's transition to a circular economy. This study investigated the exposure levels of selected persistent organic pollutants (POPs) in workers from e-waste recycling facilities across Europe. The concentrations of seven polychlorinated biphenyls (PCBs) and eight polybrominated diphenyl ethers (PBDEs) congeners were measured by GC-MS. Workers were categorized into five groups based on the type of e-waste handled and two control groups. Generalized linear models were used to assess the determinants of exposure levels among workers. POPs levels were also assessed in dust and silicone wristbands (SWB) and compared with serum. Four PCB congeners (CB 118, 138, 153, and 180) were frequently detected in serum regardless of worker's category. With the exception of CB 118, all tested PCBs were significantly higher in workers compared to the control group. Controls working in the same company as occupationally exposed (Within control group), also displayed higher levels of serum CB 180 than non-industrial controls with no known exposures to these chemicals (Outwith controls) (p < 0.05). BDE 209 was the most prevalent POP in settled dust (16 μg/g) and SWB (220 ng/WB). Spearman correlation revealed moderate to strong positive correlations between SWB and dust. Increased age and the number of years smoked cigarettes were key determinants for workers exposure. Estimated daily intake through dust ingestion revealed that ΣPCB was higher for both the 50th (0.03 ng/kg bw/day) and 95th (0.09 ng/kg bw/day) percentile exposure scenarios compared to values reported for the general population. This study is one of the first to address the occupational exposure to PCBs and PBDEs in Europe among e-waste workers through biomonitoring combined with analysis of settled dust and SWB. Our findings suggest that e-waste workers may face elevated PCB exposure and that appropriate exposure assessments are needed to establish effective mitigation strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The aim of this study was to investigate the practicability of exhaled breath condensate (EBC) as a biological matrix to detect and measure hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) in workers occupationally exposed to Cr(VI). EBC samples were collected from workers in France, Finland, Italy, The Netherlands and the United Kingdom from three different target activities: chrome platers, stainless steel welders and surface treatment workers. Pre and post working week EBC samples were collected from 177 exposed workers and 98 unexposed workers (control group). Hyphenated chromatography systems with inductively coupled plasma - mass spectrometry (ICP-MS) were for the analysis. The results showed that the occupationally exposed workers had significantly higher levels of Cr(VI) and Cr(III) than the control group. Chrome platers exhibited the highest Cr(VI) levels in their EBC samples, with a significant increase from their pre to post samples for both Cr(VI) and Cr(III). A significant difference was also found between pre and post EBC samples for Cr(III) in welders. This study has shown that EBC has the potential to be a valid, non-invasive biological matrix to assess occupational exposure to Cr(VI) and Cr(III) for biological monitoring assessment, with the ability to detect low level inhalation exposures., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2023. Published by Elsevier B.V. All rights reserved.)

Occupational exposures to hexavalent Chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P-Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in bath plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P-Cr concentrations. RBC-Cr and P-Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P-Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P-Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Exposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating and other surface treatment processes. The aim of this study was to provide EU relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals., (Crown Copyright © 2021. Published by Elsevier Inc. All rights reserved.)

Bisphenol A (BPA) and its substitutes bisphenol S (BPS) and bisphenol F (BPF) are endocrine disrupting chemicals widely used in the production of polycarbonate plastics, epoxy resins and thermal papers. The aim of the review was to identify occupational studies using human biomonitoring (HBM) as a tool for bisphenol exposure assessment and to characterize research gaps on the topic as part of the HBM4EU project. Hence, a systematic literature search using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology was conducted for articles published between 2000 and 27th March 2020 across three databases (PubMed, Scopus and Web of Science). Thirty studies on the occupational HBM of BPA met the inclusion criteria. Regarding BPS and BPF, only 4 and 2 publications were retrieved, respectively. Fifty-seven percent (57%) of the studies selected for BPA were conducted in Asia whereas half of BPS and BPF studies were undertaken in Europe. Studies on BPA in plastic and epoxy resin sectors were infrequent in Europe while Asian data showed higher exposure when the substance is employed as raw material. The main data on BPS were among cashiers while BPF data were available from incinerator workers. Several research gaps have been identified: (i) shortage of HBM studies on occupational exposure, especially to BPS and BPF; (ii) different methodological designs making suitable comparisons between studies difficult; and (iii) only few studies conducted on the industrial applications of bisphenols outside Asia. This review highlights the lack of recent occupational HBM studies on bisphenols and the need for a harmonized approach to acquire reliable data. Considering the increasing replacement of BPA by BPS and BPF, it is of relevance to evaluate the exposure to these substances and the impact of the available risk management measures on workers exposure and possible health risk., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

The aim of this study was to assess phthalate exposure of non-occupationally exposed working aged population in Finland. Studied phthalates included diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), diisobutyl phthalate (DiBP), benzyl butyl phthalate (BzBP), dicyclohexyl phthalate (DCHP), di(2-ethylhexyl) phthalate (DEHP), diisononyl phthalate (DiNP), diisodecyl phthalate (DiDP), di(2-propylheptyl) phthalate (DPHP), and di-n-octyl phthalate (DnOP). Sample collection campaign took place in 2015. Metabolites of DEP, DnBP and DiBP were detected in all the first morning void urine samples of the non-occupationally exposed volunteers (n = 60; 42 women and 18 men; aged 25-63). Metabolite of BBP and secondary metabolites of DEHP and DiNP were detected in >90% of the samples. MCHP (1.7%), MEHP (18.3%), cx-MiNP (8.3%) and MnOP (1.7%) were less frequently detected. MiNP and OH-MPHP were not detected in any of the urine samples. The observed levels were mostly comparable to the levels published in the adult population in Europe and the US. One notable difference was the observed higher exposure of the Finnish study population to DnBP in comparison to the German, Austrian, Norwegian and US populations. The levels of individual phthalates did not often correlate very well with each other. In most cases, higher exposure to phthalates was seen in females in comparison to males, which is in accordance with other studies. The urinary levels were compared to the biomonitoring equivalents (BEs), which were calculated on the basis of published DNELs (derived no-effect levels). The P95 levels of individual phthalates remained below the respective BEs, the highest risk characterization ratio (RCR) being 0.88 for DnBP and the second highest 0.34 for DiBP. For other phthalates, the RCRs were below 0.2. Using the P95 levels, combined exposure to DnBP, DiBP, DEHP and BBP resulted in risk characterization ratio exceeding 1. This suggests a need to limit the exposure to these phthalates., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Author(s). Published by Elsevier B.V. All rights reserved.)

The EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. Within its remit, the project is gathering new, policy relevant, EU-wide data on occupational exposure to relevant priority chemicals and developing new approaches for occupational biomonitoring. In this manuscript, the hexavalent chromium [Cr(VI)] study design is presented as the first example of this HBM4EU approach. This study involves eight European countries and plans to recruit 400 workers performing Cr(VI) surface treatment e.g. electroplating or stainless steel welding activities. The aim is to collect new data on current occupational exposure to Cr(VI) in Europe and to test new methods for Cr biomonitoring, specifically the analysis of Cr(VI) in exhaled breath condensate (EBC) and Cr in red blood cells (RBC) in addition to traditional urinary total Cr analyses. Furthermore, exposure data will be complemented with early biological effects data, including genetic and epigenetic effects. Personal air samples and wipe samples are collected in parallel to help informing the biomonitoring results. We present standard operational procedures (SOPs) to support the harmonized methodologies for the collection of occupational hygiene and HBM samples in different countries., (Crown Copyright © 2019. Published by Elsevier Inc. All rights reserved.)

Resorcinol is a suspected endocrine disruptor that affects thyroid function by inhibiting thyroxin peroxidase. It may also have an impact on iodine uptake. Resorcinol has various uses; for example in the manufacture of rubber products and in wood adhesives, flame retardants, UV stabilizers, and dyes. It is also used in personal care products such as hair colorants, anti-acne preparations, and peels. The aim of this study was to assess both environmental background exposure and occupational exposure to resorcinol in Finland. We investigated occupational exposure in hairdresser work and in the manufacture of tyres, adhesive resins and glue-laminated timber by biomonitoring total resorcinol concentration in urine samples. The biomonitoring results were compared to the urinary levels of occupationally non-exposed volunteers, and to the biomonitoring equivalent (BE), which we estimated on the basis of the EFSA's acceptable daily intake (ADI) value for resorcinol. Almost all the urine samples (99%) of the non-occupationally exposed volunteers contained measurable amounts of resorcinol. The urinary resorcinol data were rather scattered, and the resorcinol concentrations among women (GM 84 μg/l, 95th percentile 2072 μg/l) were clearly higher than the respective concentrations among men (GM 35 μg/l, 95th percentile 587 μg/l). The reason for this difference remains unclear. Although the two highest results exceeded the BE of 4 mg/l calculated on the basis of the EFSA's ADI, the 95th percentile of the occupationally non-exposed volunteers' results remained well below the BE among both males and females. According to the results, hairdressers' exposure to resorcinol was at the same level as that of the reference population of occupationally non-exposed volunteers. All hairdresser's values remained below the BE for resorcinol. The urinary resorcinol levels of the industrial workers were also at the same level as those of the reference population. We observed slight increases in the post-shift and evening samples of those working in the manufacture of tyres and adhesive resins. The results of some workers in the tyre manufacturing company exceeded the 95th percentile of non-occupationally exposed males, which was used as a biological guidance value for occupational exposure. Moreover, in this case exposure was below the health-based biomonitoring equivalents. All the air samples collected in the companies contained very low resorcinol concentrations. It should be noted that the sample sizes for the male controls and industrial groups were small., (Copyright © 2018. Published by Elsevier B.V.)

Bisphenol A (BPA) has one of the highest production volumes of all chemicals worldwide. It has been widely studied because of its endocrine modulating activity. In addition to dietary intake, absorption of BPA via the skin from handling thermal papers is believed to be a relevant route of exposure. We studied BPA exposure via thermal paper receipts in simulation experiments performed by three volunteers, and examined urinary excretion of BPA. We also evaluated background BPA excretion among the Finnish working-age population. The geometric mean BPA excretion among non-occupationally exposed working-age Finns (n=121) was 2.6 μg/l, the range being 0.8-18.9 μg/l. The 95th percentile of the non-occupationally exposed people was 8 μg/l, and this was set as the reference limit for the non-occupationally exposed population. In the first simulation experiment, which was conducted under conditions representing the most likely exposure, i.e., the work of a cashier in a supermarket, BPA excretion remained below the reference limit in all participants. In the second simulation experiment, with more intensive, short-time handling of thermal paper (three times 5 min), urinary excretion also remained at or below background levels (highest value being 10.3 μg/l). The calculated maximum BPA excretion per day after handling thermal paper was less than 0.2 μg/kg of body weight, suggesting a total daily intake over 25 times lower than the European Food Safety Authority's (EFSA's) proposal for a temporary tolerable daily intake (temporary TDI) (5 μg/kg/day)., (Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.)

Nitromethane has several properties that make it an interesting solvent for capillary electrophoresis especially for lipophilic analytes that are not sufficiently soluble in water: freezing and boiling points are suitable for laboratory conditions, low viscosity leads to favourable electrophoretic mobilities, or an intermediate dielectric constant enables dissolution of electrolytes. In the present work we investigate the change of electrophoretically relevant analyte properties - mobilities and pKa values - in nitromethane in dependence on the most important experimental conditions determined by the background electrolyte: the ionic strength, I, and the pH. It was found that the mobility decreases with increasing ionic strength (by, e.g. up to 30% from I = 0 to 50 mmol/L) according to theory. An appropriate pH scale is established by the aid of applying different concentration ratios of a buffer acid with known pKa and its conjugate base. The mobility of the anionic analytes (from weak neutral acids) depends on the pH with the typical sigmoidal curve in accordance with theory. The pKa of neutral acids derived from these curves is shifted by as much as 14 pK units in nitromethane compared to water. Both findings confirm the agreement of the electrophoretic behaviour of the analytes with theories of electrolyte solutions. Separation of several neutral analytes was demonstrated upon formation of charged complexes due to heteroconjugation with chloride as ionic constituent of the background electrolyte.

Although the establishment of a pH scale and the determination of the pH in water is not problematic, it is not a straightforward task in non-aqueous solvents. As capillary zone electrophoresis (CZE) in organic solvents has gained increasing interest, it seems to be valuable to re-discuss the concept of the pH in such media, especially pointing to those aspects, which make pH measurement uncertain in non-aqueous solvents. In this review, the relevant aspects when dealing with primary standard (PS) and secondary standard (SS) as recommended by the International Union of Pure and Applied Chemistry (IUPAC), and the usage of the operational pH are discussed with special emphasis to non-aqueous solvents. Here, different liquid junction potentials, incomplete dissociation of the electrolytes (especially in solvents with low or moderate relative permittivity) and the occurrence of homo- and heteroconjugation must be taken into account. Problems arising in capillary zone electrophoresis practice are addressed, e.g. when the background electrolyte (BGE) consists of organic solvents, but the measuring electrode (normally the glass electrode) is calibrated with aqueous buffers, and the liquid junction potentials between the solvents do not cancel each other. The alternative concept of establishing a certain pH is described, using mixtures of reference acids or bases with known pKa in the organic solvent, and their respective salts, at a certain concentration ratio, relying to the Henderson-Hasselbalch equation. Special discussion is directed to those organic solvents most common in capillary zone electrophoresis, methanol (MeOH) and acetonitrile (ACN), but other solvents are included as well. The potential significance of small amounts of water present in the organic solvent on changes in pKa values, and thus on the pH of the buffering components is pointed out.

Self-constructed pressurized hot water extraction (PHWE) equipment was used in dynamic mode to extract spiked phenolic compounds (phenol, 3-methylphenol, 4-chloro-3-methylphenol and 3,4-dichlorophenol) from sea sand and soil. Phenols were analyzed by both gas chromatography-mass spectrometry (GC-MS) and capillary zone electrophoresis (CZE) to compare the techniques and to find out if CZE is a suitable tool for analysis of phenols extracted from environmental matrix. Good recoveries of phenols spiked in sea sand were achieved at all PHWE temperatures (50, 100, 200, 300 C). GC-MS studies showed that phenols were selectively extracted from soil at 50 C but various other compounds (e.g. polyaromatic hydrocarbons) were extracted along with the phenols at 300 degrees C. In the case of CZE, phenols extracted from the soil, at 300 C were separated with good resolution at pH 9.7, and co-extracted compounds did not interfere with the analysis. The analytical values obtained by GC-MS and CZE were generally of similar magnitude.

The separation of mono- and dimethylphenols by capillary electrophoresis in pure acetonitrile was investigated. In acetonitrile, uncharged phenols interact with background electrolyte anions forming negatively charged complexes, which can be separated from each other by capillary electrophoresis. The background electrolyte anions tested were acetate, bromide and chloride. The calculated formation constants for phenol-anion complexes were highest with acetate and smallest with bromide. Complex formation was found to be sensitive to traces of water in the background electrolyte. The separation of methylphenols was also carried out in acetonitrile at high pH using background electrolytes prepared from diprotic acids and tetrabutylammonium hydroxide. At high pH the phenols were partly dissociated, providing an additional mechanism for the separation. All methylphenols were separated with the use of malonate background electrolyte. However, this approach was prone to interference from methanol resulting from the tetrabutylammonium hydroxide solution.

The mobilities of cationic analytes in organic solvents and water are compared, and the reasons for differences in the mobilities are discussed in detail. Actual mobilities (at background electrolyte concentration 10 mmol/l) of anilinium ions were determined by capillary zone electrophoresis in water, methanol, acetonitrile and mixtures of methanol and acetonitrile (in volume ratios 1:1, 1:3 and 3:1). The actual mobilities correlated with the viscosity of the organic solvent: the products of actual mobility and viscosity were constant within 7%. However, these products were significantly larger in water. Larger products of mobility and viscosity in water were also found for unsubstituted anilinium when the absolute mobility (at zero ionic strength) was taken into consideration. Thus, ion-solvent interactions must be responsible for the seemingly high mobility in water compared with that in organic solvents. This finding can be explained by the effect of the ion on the water structure. Based on equilibrium constant for ion-pair formation given in the literature, about 20% of the main background electrolyte constituent (tetrapropylammonium perchlorate) is associated at 10 mmol/l concentration in acetonitrile. Comparison of the plot of the measured mobilities of the analytes vs. the square root of the corrected ionic strength of the background electrolyte in acetonitrile with the prediction based on the Debye-Hückel-Onsager theory showed the measured mobilities deviate negatively from the theoretical line. This is apparently due to ion pairing, which takes place for the analytes as well.

The influence of high electric field strength on the separation of basic analytes in non-aqueous alcohol background electrolyte (BGE) solutions was investigated. Increasing the separation voltage in capillary electrophoresis (CE) may be advantageous if the conductivity of the BGE solution is low enough to allow fast separations without excessive Joule heating or band broadening. The voltage range tested was 20-60 kV with methanol and ethanol, and 25-60 kV with propanol and butanol as solvent for BGE. The resulting electric field strengths ranged from 660 V cm(-1) to 2000 V cm(-1). Experiments were made with a special laboratory constructed CE instrument. The separation efficiency vs. voltage curve was found to vary with the alcohol BGE solution. The increase in voltage decreased the separation efficiency in the case of methanol BGE solution, but with the other BGEs a clear efficiency maximum was obtained above 30 kV. The highest separation efficiencies were achieved with propanol BGE solution, where the efficiency maximum was reached at 45 kV. However, reasonable efficiency was achieved even at 60 kV. The extent of Joule heating was determined by calculating the temperature inside the capillary and the observed plate heights were interpreted in terms of the Van Deemter equation. The decrease in the separation efficiency with higher voltage was attributed mainly to Joule heating in the case of methanol and ethanol BGE solution and to the analyte adsorption on the capillary wall with propanol and butanol BGE solutions.

The electrophoretically relevant properties of monoacidic 21 bases (including common drugs) containing aliphatic or aromatic amino groups were determined in methanol as solvent. These properties are the actual mobilities (that of the fully ionised weak bases), and their pKa values. Actual mobilities were measured in acidic methanolic solutions containing perchloric acid. The ionisation constants of the amines were derived from the dependence of the ionic mobilities on the pH of the background electrolyte solution. The pH scale in methanol was established from acids with known conventional pK*a values in this solvent used as buffers, avoiding thus further adjustment with a pH sensitive electrode that might bias the scale. Actual mobilities in methanol were found larger than in water, and do not correlate well with the solvent's viscosity. The pK*a values of the cation acids, HB-, the corresponding form of the base, B, are higher in methanol, whereas a less pronounced shift was found than for neutral acids of type HA. The mean increase (compared to pure aqueous solution) for aliphatic ammonium type analytes is 1.8, for substituted anilinium 1.1, and for aromatic ammonium from pyridinium type 0.5 units. The interpretation of this shift was undertaken with the concept of the medium effect on the particles involved in the acid-base equilibrium: the proton, the molecular base, B, and the cation HB+.

The benefits of non-aqueous capillary electrophoresis have been described in a number of recent publications. The wide selection of organic solvents, with their very different physicochemical properties, broadens our scope to manipulate separation selectivity. The lower currents present in non-aqueous solvents allow the use of high electric field strengths and wide bore capillaries, the latter in turn allowing larger sample load. In many cases detection sensitivity can also be enhanced. The potential of non-aqueous capillary electrophoresis is discussed throughout the paper, and the feasibility of capillary electrophoresis under non-aqueous media is demonstrated with reference to several applications.