Search

Background: Spectral data from multiple sources can be integrated into multi-block fusion chemometric models, such as sequentially orthogonalized partial-least squares (SO-PLS), to improve the prediction of sample quality features. Pre-processing techniques are often applied to mitigate extraneous variability, unrelated to the response variables. However, the selection of suitable pre-processing methods and identification of informative data blocks becomes increasingly complex and time-consuming when dealing with a large number of blocks. The problem addressed in this work is the efficient pre-processing, selection, and ordering of data blocks for targeted applications in SO-PLS., Results: We introduce the PROSAC-SO-PLS methodology, which employs pre-processing ensembles with response-oriented sequential alternation calibration (PROSAC). This approach identifies the best pre-processed data blocks and their sequential order for specific SO-PLS applications. The method uses a stepwise forward selection strategy, facilitated by the rapid Gram-Schmidt process, to prioritize blocks based on their effectiveness in minimizing prediction error, as indicated by the lowest prediction residuals. To validate the efficacy of our approach, we showcase the outcomes of three empirical near-infrared (NIR) datasets. Comparative analyses were performed against partial-least-squares (PLS) regressions on single-block pre-processed datasets and a methodology relying solely on PROSAC. The PROSAC-SO-PLS approach consistently outperformed these methods, yielding significantly lower prediction errors. This has been evidenced by a reduction in the root-mean-squared error of prediction (RMSEP) ranging from 5 to 25 % across seven out of the eight response variables analyzed., Significance: The PROSAC-SO-PLS methodology offers a versatile and efficient technique for ensemble pre-processing in NIR data modeling. It enables the use of SO-PLS minimizing concerns about pre-processing sequence or block order and effectively manages a large number of data blocks. This innovation significantly streamlines the data pre-processing and model-building processes, enhancing the accuracy and efficiency of chemometric models., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Terahertz time-domain spectroscopy (THz-TDS) is an emerging optical technique that has potential applications in the characterization of (bio)materials. However, the complicated extraction of optical parameters from multi-layered and optically thin samples is a barrier towards its acceptance by applied scientists. Therefore, the aim of this work is to provide a straightforward approach for the extraction of the THz absorption coefficient and index of refraction profiles of aqueous thin films in a window-sample-window configuration, which is ubiquitous in many laboratories (i.e., sample in a cuvette). A numerical approach-based methodology that accounts for multiple layers, Fabry-Pérot effect, and sample thickness is elaborated which involves an optical interference model based on a tri-layer structure and a simple thickness estimation technique. This method was validated on water samples where a good agreement was found with the THz optical parameters of water reported in the literature, while the use of a commercial software resulted in erroneous optical parameters estimates when used without due regard to its limitations. A case study was then performed to demonstrate the ability of the proposed method to characterize agarose hydrogels with varying degree of sulfation. It was demonstrated that THz-TDS can provide insight into the hydration state of the agarose hydrogels, including the relative number of the hydrogen bonds between the hydroxyl moieties of water and the polysaccharide network which is perturbed by the presence of sulfate. The trend in the index of refraction profiles suggested microstructural differences between the agarose hydrogels, which were confirmed by visualizing the agarose network morphology using cryo-SEM imaging., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Long-term studies have shown a bias drift over time in the prediction performance of near-infrared spectroscopy measurement systems. This bias drift generally requires extra laboratory reference measurements to detect and correct for this bias. Since these reference measurements are expensive and time consuming, there is a need for advanced methodologies for bias drift monitoring and correction without the need for taking extra samples. In this study, we propose and validate a method to monitor the bias drift and two methods to tackle it. The first method requires no extra measurements and uses a modified version of Partial Least Squares Regression to estimate and correct the bias. This method is based on the assumption that the mean concentration of the predicted component remains constant over time. The second method uses regular bulk milk measurements as a reference for bias correction. This method compares the measured concentrations of the bulk milk to the volume-weighted average concentrations of individual milk samples predicted by the sensor. Any difference between the actual and calculated bulk milk composition is then used to perform a bias correction on the predictions by the sensor system. The effectiveness of these methods to improve the component prediction was evaluated on data originating from a custom-built sensor that automatically measures the NIR reflectance and transmittance spectra of raw milk on the farm. We evaluate the practical use case where models for predicting the milk composition are trained upon installation of the sensor at the farm, and later used to predict the composition of subsequent samples over a period of more than 6 months. The effectiveness of the fully unsupervised method was confirmed when the mean concentration of the milk samples remained constant, while the effectiveness reduced when this was not the case. The bulk milk correction method was effective when all relevant samples for the component were measured by the sensor and included in the analyzed bulk milk, but is less effective when samples included in the bulk which are not measured by the sensor system. When the necessary conditions are met, these methods can be used to extend the lifetime of deployed prediction models by significantly reducing the bias on the predicted values., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Calibration transfer has been traditionally performed in the context of transferring models between instruments using standard samples. Recently, new methodologies and applications have shown that transfer techniques can be adopted to achieve calibration transfer between other types of domains, such as product form, variant or seasonality. In addition, to achieving a higher efficiency for calibration transfer, it is desirable to perform the transfer without the need for standard samples or new reference analyses. Therefore, we propose a method for unsupervised calibration transfer based on the orthogonalization for structural differences between domains. The method has been successfully applied to one simulated dataset and two real datasets. In the studied cases, the proposed methodology allowed to achieve a successful transfer of calibration models and enabled the interpretation of the interferences responsible for the degradation of the original calibration models when transferred to the new domain., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Inspired by the rapid progress and existing limitations in surface plasmon resonance (SPR) biosensing technology, we have summarized the recent trends in the fields of both chip-SPR and fiber optic (FO)-SPR biosensors during the past five years, primarily regarding smart layers design, multiplexing, continuous monitoring and in vivo sensing. Versatile surface chemistries, biomaterials and nanomaterials have been utilized thus far to generate smart layers on SPR platforms and as such achieve oriented immobilization of bioreceptors, improved fouling resistance and sensitivity enhancement, collectively aiming to improve the biosensing performance. Furthermore, often driven by the desires for time- and cost-effective quantification of multiple targets in a single measurement, efforts have been made to implement multiplex bioassays on SPR platforms. While this aspect largely remains difficult to attain, numerous alternative strategies arose for obtaining parallel analysis of multiple analytes in one single device. Additionally, one of the upcoming challenges in this field will be to succeed in using SPR platforms for continuous measurements and in vivo sensing, and as such match up other biosensing platforms where these goals have been already conquered. Overall, this review will give insight into multiple possibilities that have become available over the years for boosting the performance of SPR biosensors. However, because combining them all into one optimal sensor is practically not feasible, the final application needs to be considered while designing an SPR biosensor, as this will determine the requirements of the bioassay and will thus help in selecting the essential elements from the recent progress made in SPR sensing., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Professor Jeroen Lammertyn is a board member of FOx Biosystems, a spin-off company of KU Leuven commercializing FO-SPR platforms, next to the principal investigator of the Biosensors group., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Spectroscopy in the visible near-infrared spectral (Vis-NIRS) range combined with imaging techniques (hyperspectral imaging, HSI) allows assessment of chemical composition, texture, and meat structure. The use of HSI in the meat and food industry has observed a significant growth in the last decade, yet its use for assessment of meat it is not optimal yet. The application of HSI for assessment of meat is reviewed with focus on its ability to capture meat unique chemical and structural characteristics. While HSI is widely used for assessment of chemical composition, a limited number of evidences on its ability to handle the effect of different sources of variation on the assessment is found. The use of spatially resolved spectroscopy has been able to detect structural information related to animal background, muscle type, rigor process and ageing. Similarly the use of texture features seem to capture unique characteristics of meat., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The bulk optical properties (BOP) of two bovine muscles were studied in the 500nm to 1850nm wavelength range. Over a two-week period of wet aging, the BOP of the biceps femoris (BF) and longissimus lumborum (LL) were determined and related to moisture content, tenderness and cooking loss. The absorption by myoglobin and reduced scattering coefficient were higher in the BF compared to the LL. The scattering anisotropy factor was relatively high (>0.95 for LL), representing dominant forward scattering. Two-toning effects in the BF could be attributed to significant scattering differences, as no differences in absorption properties were observed. During wet aging, the anisotropy factor decreased, while tenderness increased. It was hypothesized that this might be related to proteolysis of cytoskeletal proteins. The results show the potential use of BOP to monitor tenderization and the cause of color differences in beef muscles. Moreover, this information could be used to develop and optimize optical sensors for non-destructive meat quality monitoring., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Reproductive performance is an important factor affecting the profitability of dairy farms. Optimal fertility results are often confined by the time-consuming nature of classical heat detection, the fact that high-producing dairy cows show estrous symptoms shorter and less clearly, and the occurrence of ovarian problems. Today's commercially available solutions for automatic estrus detection include monitoring of activity, temperature and progesterone. The latter has the advantage that, besides estrus, it also allows to detect pregnancy and ovarian problems. Due to the large variation in progesterone profiles, even between cycles within the same cow, the use of general thresholds is suboptimal. To this end, an intelligent and individual interpretation of the progesterone measurements is required. Therefore, an alternative solution is proposed, which takes individual and complete cycle progesterone profiles into account for reproduction monitoring. In this way, profile characteristics can be translated into specific attentions for the farmers, based on individual rather than general guidelines. To enable the use of the profile and cycle characteristics, an appropriate model to describe the milk progesterone profile was developed. The proposed model describes the basal adrenal progesterone production and the growing and regressing cyclic corpus luteum. To identify the most appropriate way to describe the increasing and decreasing part of each cycle, three mathematical candidate functions were evaluated on the increasing and decreasing parts of the progesterone cycle separately: the Hill function, the logistic growth curve and the Gompertz growth curve. These functions differ in the way they describe the sigmoidal shape of each profile. The increasing and decreasing parts of the P4 cycles were described best by the model based on respectively the Hill and Gompertz function. Combining these two functions, a full mathematical model to characterize the progesterone cycle was obtained. It was shown that this approach retains the flexibility to deal with both varying baseline and luteal progesterone values, as well as prolonged or delayed cycles., (Copyright © 2017 Elsevier Inc. All rights reserved.)

A global optimizer has been developed, capable of computing the optimal configuration in a probe for spatially resolved reflectance spectroscopy (SRS). The main objective is to minimize the number of detection fibers, while maintaining an accurate estimation of both absorption and scattering profiles. Multiple fibers are necessary to robustify the estimation of optical properties against noise, which is typically present in the measured signals and influences the accuracy of the inverse estimation. The optimizer is based on a robust metamodel-based inverse estimation of the absorption coefficient and a reduced scattering coefficient from the acquired SRS signals. A genetic algorithm is used to evaluate the effect of the fiber placement on the performance of the inverse estimator to find the bulk optical properties of raw milk. The algorithm to find the optimal fiber placement was repeatedly executed for cases with a different number of detection fibers, ranging from 3 to 30. Afterwards, the optimal designs for each considered number of fibers were compared based on their performance in separating the absorption and scattering properties, and the significance of the differences was tested. A sensor configuration with 13 detection fibers was found to be the combination with the lowest number of fibers which provided an estimation performance which was not significantly worse than the one obtained with the best design (30 detection fibers). This design resulted in the root mean squared error of prediction (RMSEP) of 1.411 cm(-1) (R(2) = 0.965) for the estimation of the bulk absorption coefficient values, and 0.382 cm(-1) (R(2) = 0.996) for the reduced scattering coefficient values., (Copyright © 2016 Elsevier B.V. All rights reserved.)

By controlling the blood glucose levels of diabetics permanent diabetes-related problems such as blindness and loss of limbs can be delayed or even avoided. Therefore, many researchers have aimed at the development of a non-invasive sensor to monitor the blood glucose level continuously. As non-invasive measurements through the skin, the ear lobe or the gums have proven to be either unreliable or impractical, attention has recently shifted to minimally invasive sensors which measure the glucose content in serum or interstitial fluid. Thanks to the development of on-chip spectrometers minimally invasive, implantable devices are coming within reach. However, this technology does not allow to acquire a large number of wavelengths over a broad range. Therefore, the most informative combination of a limited number of variables should be selected. In this study, Interval PLS (iPLS), Variable Importance in Projection (VIP), Uninformative Variable Elimination (UVE), Bootstrap-PLS coefficients, Moving window, CorXyPLS, Interval Random Frog-PLS and combinations of these methods were used in order to address the question whether the short wave band (800-1500 nm), first overtone band (1500-1800 nm), the combination band (2050-2300 nm) or a combination of them is the most informative region for glucose measurements and which wavebands should be measured within these wavelength ranges. The three different data sets employed focus on the determination of (1) glucose in aqueous solutions over the 1-30 mM range in presence of urea and sodium D-lactate, (2) glucose in aqueous solutions over the 2-16 mM range in presence of icodextrin and urea and (3) glucose in human serum samples. The best results for the first, second and third data sets were obtained by selecting 40, 130 and 20 variables resulting in a PLS model with an RMSEP of 0.56, 0.59 and 1.5mM, respectively. It was found that the first overtone band is most informative for aqueous solutions, while for glucose measurement of serum samples the combination band was found to be the better choice., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The size of colloidal particles in food products has a considerable impact on the product's physicochemical, functional and sensory characteristics. Measurement techniques to monitor the size of suspended particles could, therefore, help to further reduce the variability in production processes and promote the development of new food products with improved properties. Visible and near-infrared (Vis/NIR) spectroscopy is already widely used to measure the composition of agricultural and food products. However, this technology can also be consulted to acquire microstructure-related scattering properties of food products. In this study, the effect of the fat globule size on the Vis/NIR bulk scattering properties of milk was investigated. Variability in fat globule size distribution was created using ultrasonic homogenization of raw milk. Reduction of the fat globule size resulted in a higher wavelength-dependency of both the Vis/NIR bulk scattering coefficient and the scattering anisotropy factor. Moreover, the anisotropy factor and the bulk scattering coefficients for wavelengths above 600 nm were reduced and were dominated by Rayleigh scattering. Additionally, the bulk scattering properties could be well (R(2) ≥ 0.990) estimated from measured particle size distributions by consulting an algorithm based on the Mie solution. Future research could aim at the inversion of this model to estimate the particle size distributions from Vis/NIR spectroscopic measurements., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Partial Least Squares (PLS) regression is one of the most used methods for extracting chemical information from Near Infrared (NIR) spectroscopic measurements. The success of a PLS calibration relies largely on the representativeness of the calibration data set. This is not trivial, because not only the expected variation in the analyte of interest, but also the variation of other contributing factors (interferents) should be included in the calibration data. This also implies that changes in interferent concentrations not covered in the calibration step can deteriorate the prediction ability of the calibration model. Several researchers have suggested that PLS models can be robustified against changes in the interferent structure by incorporating expert knowledge in the preprocessing step with the aim to efficiently filter out the spectral influence of the spectral interferents. However, these methods have not yet been compared against each other. Therefore, in the present study, various preprocessing techniques exploiting expert knowledge were compared on two experimental data sets. In both data sets, the calibration and test set were designed to have a different interferent concentration range. The performance of these techniques was compared to that of preprocessing techniques which do not use any expert knowledge. Using expert knowledge was found to improve the prediction performance for both data sets. For data set-1, the prediction error improved nearly 32% when pure component spectra of the analyte and the interferents were used in the Extended Multiplicative Signal Correction framework. Similarly, for data set-2, nearly 63% improvement in the prediction error was observed when the interferent information was utilized in Spectral Interferent Subtraction preprocessing., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Partial Least Squares (PLS) is by far the most popular regression method for building multivariate calibration models for spectroscopic data. However, the success of the conventional PLS approach depends on the availability of a 'representative data set' as the model needs to be trained for all expected variation at the prediction stage. When the concentration of the known interferents and their correlation with the analyte of interest change in a fashion which is not covered in the calibration set, the predictive performance of inverse calibration approaches such as conventional PLS can deteriorate. This underscores the need for calibration methods that are capable of building multivariate calibration models which can be robustified against the unexpected variation in the concentrations and the correlations of the known interferents in the test set. Several methods incorporating 'a priori' information such as pure component spectra of the analyte of interest and/or the known interferents have been proposed to build more robust calibration models. In the present study, four such calibration techniques have been benchmarked on two data sets with respect to their predictive ability and robustness: Net Analyte Preprocessing (NAP), Improved Direct Calibration (IDC), Science Based Calibration (SBC) and Augmented Classical Least Squares (ACLS) Calibration. For both data sets, the alternative calibration techniques were found to give good prediction performance even when the interferent structure in the test set was different from the one in the calibration set. The best results were obtained by the ACLS model incorporating both the pure component spectra of the analyte of interest and the interferents, resulting in a reduction of the RMSEP by a factor 3 compared to conventional PLS for the situation when the test set had a different interferent structure than the one in the calibration set., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Owing to spectral variations from other sources than the component of interest, large investments in the NIR model development may be required to obtain satisfactory and robust prediction performance. To make the NIR model development for routine active pharmaceutical ingredient (API) prediction in tablets more cost-effective, alternative modelling strategies were proposed. They used a massive amount of prior spectral information on intra- and inter-batch variation and the pure component spectra to define a clutter, i.e., the detrimental spectral information. This was subsequently used for artificial data augmentation and/or orthogonal projections. The model performance improved statistically significantly, with a 34-40% reduction in RMSEP while needing fewer model latent variables, by applying the following procedure before PLS regression: (1) augmentation of the calibration spectra with the spectral shapes from the clutter, and (2) net analyte pre-processing (NAP). The improved prediction performance was not compromised when reducing the variability in the calibration set, making exhaustive calibration unnecessary. Strong water content variations in the tablets caused frequency shifts of the API absorption signals that could not be included in the clutter. Updating the model for this kind of variation demonstrated that the completeness of the clutter is critical for the performance of these models and that the model will only be more robust for spectral variation that is not co-linear with the one from the property of interest., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Milk production is a dominant factor in the metabolism of dairy cows involving a very intensive interaction with the blood circulation. As a result, the extracted milk contains valuable information on the metabolic status of the cow. On-line measurement of milk components during milking two or more times a day would promote early detection of systemic and local alterations, thus providing a great input for strategic and management decisions. The objective of this study was to investigate the potential of mid-infrared (mid-IR) spectroscopy to measure the milk composition using two different measurement modes: micro attenuated total reflection (μATR) and high throughput transmission (HTT). Partial least squares (PLS) regression was used for prediction of fat, crude protein, lactose and urea after preprocessing IR data and selecting the most informative wavenumber variables. The prediction accuracies were determined separately for raw and homogenized copies of a wide range of milk samples in order to estimate the possibility for on-line analysis of the milk. In case of fat content both measurement modes resulted in an excellent prediction for homogenized samples (R(2)>0.92) but in poor results for raw samples (R(2)<0.70). Homogenization was however not mandatory to achieve good predictions for crude protein and lactose with both μATR and HTT, and urea with μATR spectroscopy. Excellent results were obtained for prediction of crude protein, lactose and urea content (R(2)>0.99, 0.98 and 0.86 respectively) in raw and homogenized milk using μATR IR spectroscopy. These results were significantly better than those obtained by HTT IR spectroscopy. However, the prediction performance of HTT was still good for crude protein and lactose content (R(2)>0.86 and 0.78 respectively) in raw and homogenized samples. However, the detection of urea in milk with HTT spectroscopy was significantly better (R(2)=0.69 versus 0.16) after homogenization of the milk samples. Based on these observations it can be concluded that μATR approach is most suitable for rapid at line or even on-line milk composition measurement, although homogenization is crucial to achieve good prediction of the fat content., (Copyright © 2011 Elsevier B.V. All rights reserved.)