Search

People of all ages enjoy chocolate, and its popularity is attributed to its pleasant taste and aroma, as well as its associated health benefits. Produced through both artisanal and industrial processes, which involve harvesting, selecting, fermenting, roasting and grinding cocoa beans, chocolate has a diverse chemical composition. It contains stimulants for the central nervous system, including caffeine and theobromine, and antioxidants and flavonoids, some of which are associated with promoting cardiovascular health, circulatory function, alertness, and attention. This study aimed to use NIR spectroscopy to determine whether this technique can effectively quantify the percentage of cocoa present in commercial chocolates. In the exploratory analysis of the NIR spectra, conducted in the range of 900-1600 nm, it was observed that the cocoa percentage in the samples correlated most strongly with chemical groups exhibiting absorbance in the range of 900-1400 nm. Principal Component Analysis (PCA) exhibited good discriminatory ability between samples with different cocoa percentages. Kohonen neural networks have also been proven effective in processing high-dimensional nonlinear data and complementing PCA analysis in pattern recognition. Additionally, Principal Component Regression (PCR) was performed to evaluate the predictive capability of cocoa percentage based on NIR spectra, yielding an R 2 value of 0.84. The study demonstrates that integrating the NIR spectra with PCA/PCR and KNN enables cocoa percentage identification, making it a valuable tool for chocolate quality control and authenticity assurance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2025. Published by Elsevier B.V.)

Second-generation stent-grafts (SGs) have addressed many of the mechanical problems reported for first-generation endoprostheses, such as graft tear and stent rupture; however, suture wear and detachment due to pulsatile fatigue remains an issue. Numerical studies on the mechanical behavior of these endoprostheses usually model the attachment between stents and graft as a continuous ''tie'' constraint, which does not provide information on the mechanical loads acting on individual sutures. This paper presents a suitable approach for Finite Element (FE) simulations of SGs which allows for a qualitative evaluation of the loads acting on sutures. Attachment between stents and graft is modeled as rigid beams at discrete locations of the endoprostheses, and the reaction forces on the beams are analyzed. This modeling strategy is employed for four different SG models (two Z-stented commercial models and two circular-stented models) subjected to a severe 180° U-bend, followed by intraluminal pressurization. Results show that, for all models, the majority of sutures is experiencing fluctuating forces within a cardiac cycle (between 80 and 120 mmHg), which points to pulsatile fatigue as potential failure mode. In addition, the highest loads are concentrated in kinks and, for Z-stented models, at the apexes of stents. Moreover, suture loads for circular-stented models are lower than for Z-stented models, indicating better resistance to suture detachment. All these observations are in line with experimental results published in the literature, and, therefore, the procedure herein proposed may serve as a valuable tool in the development of new SG models with better suture resistance to pulsatile wear and fatigue., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Objective: This study reports the technical aspects and 30-day outcomes of the prospective, multicenter early feasibility study designed to evaluate the GORE EXCLUDER Thoracoabdominal Branch Endoprosthesis (TAMBE; W. L. Gore & Associates, Flagstaff, Ariz)., Methods: Thirteen patients with pararenal or extent IV thoracoabdominal aortic aneurysms were prospectively enrolled at five U.S sites and one non-U.S. site from 2014 to 2016. The TAMBE included four portals with either retrograde or antegrade renal portal configuration and used GORE VIABAHN Balloon-Expandable Endoprosthesis (W. L. Gore & Associates) for stenting of the renal and mesenteric arteries. The primary end point was procedural safety at 30 days, defined by absence of major adverse events, including any-cause mortality, myocardial infarction, stroke, paraplegia, bowel ischemia, respiratory failure, severe acute kidney injury (>50% decline in estimated glomerular filtration rate), dialysis, and procedural blood loss >1000 mL., Results: There were 11 male and two female patients with a mean age of 69 ± 8 years. Mean aneurysm diameter was 61 ± 13 mm. A total of 52 renal and mesenteric arteries were incorporated (4 vessels/patient). Technical success was achieved in 12 patients (92%). One patient had inadvertent occlusion of a right renal artery due to dissection. There was no mortality, aneurysm rupture, conversion to open repair, dialysis, or spinal cord injury. Mean length of hospital stay was 5 ± 3 days. At 30 days, four patients (31%) had major adverse events, all due to procedural blood loss >1000 mL. One patient had a type I endoleak at the distal renal branch, which was successfully treated by placement of an additional renal stent before dismissal. Computed tomography angiography at 30 days showed patent target vessels and no type I or type III endoleak., Conclusions: This study confirms the early feasibility of the TAMBE for treatment of pararenal and extent IV thoracoabdominal aortic aneurysms. The high technical success, no mortality, and low morbidity rate support continuation of clinical investigation in a larger population of patients., (Copyright © 2018 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.)

Background: The Octopus technique is an off-label and off-the-shelf strategy used as an option in the management of some specific and selected cases of thoracoabdominal aortic aneurysms (TAAA). We sought to compare 2 different methods of measurements on computed tomography (CT) slices and to evaluate the accommodation and conformability, before and after ballooning, of the components used in the Octopus technique., Methods: The CT gutter analysis between the 3 stent grafts within the short docking limb of the Excluder(®) was made using Viabahns(®) of 8, 7, and 6 mm in diameter. Each of the 10 possible combinations underwent a CT established protocol. The best axial image of the docking limb was submitted for an evaluation by 2 independent analysts, using 2 different methods. We also performed a postballooning evaluation, and the same CT protocol was used., Results: There was no significant difference between the formats of measurement type "A" and type "B." Furthermore, there was no significant difference between the measurements made by the independent analysts. The tomography analyses demonstrated that the combination of stent grafts (Viabahn) of 8 and 7 mm diameter, inside the short docking limb of the bifurcated endoprosthesis, had the best possible relationship between the diameters used. These combinations showed better conformability and juxtaposition, with smaller areas of gutters and theoretically less possibility of endoleak. In addition, we found that postimplant balloon dilatation impaired the conformability and juxtaposition of the stent grafts (Viabahn) in the optimum combinations., Conclusions: In this analysis, we demonstrated a feasible, reliable, and reproducible form of CT measurement of the gutters in the Octopus technique for endovascular repair of TAAAs. Based on these measurements, there is a preferable combination of Viabahn sizes to be used in the Octopus technique and that postdilatation impairs the conformability and juxtaposition., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Background: The Global Registry for Endovascular Aortic Treatment (GREAT) is a prospective observational multicenter cohort registry that was initiated in November 2011. The aim of the GREAT is to collect contemporary real-world data on the performance of all Gore aortic endografts in the treatment of multiple aortic pathologies. The primary and secondary objectives, design, and future directions of the GREAT are described., Methods: The GREAT aims to enroll 5000 consecutive patients with Gore thoracic and abdominal aortic endografts from multiple centers throughout the world. The GREAT has broad inclusion criteria with minimal exclusion criteria to reflect real-world practice such as including off-label use, nonstandard indications and devices deployed outside instruction for use. Follow-up will extend to 10 years providing major insights into the long-term durability and behavior of Gore aortic endografts. Primary end points include the incidence and timing of (1) endoleak of any type, (2) endograft migration and/or stent fracture, (3) endograft explantation, and (4) aortic rupture. Secondary end points include the following: (1) incidence of serious device events by pathology, (2) incidence of serious device events by aortic segment (ascending aorta, arch of aorta, descending thoracic aorta, abdominal aorta), (3) long-term survival by pathology, and (4) aorta-related mortality by pathology., Results: As of June 2015, 2960 patients have been enrolled into the GREAT from 78 centers in Europe, the United States, Australia, New Zealand, and Brazil. The majority of patients and centers are from Europe and the United States. Completion of enrollment is anticipated to be in 2017 with interim results planned to be published during enrollment and on follow-up., Conclusions: Upon completion, the GREAT will be among the largest clinical registry to date of abdominal and thoracic aortic devices manufactured by a single sponsor. It will provide valuable real-world data on the use and durability of Gore aortic endografts in the treatment of a variety of aortic pathologies and devices deployed within and outside instruction for use., (Copyright © 2016 Elsevier Inc. All rights reserved.)

A ruptured abdominal aortic aneurysm (RAAA), complicated by an aortocaval fistula (ACF), is usually associated with high morbidity and mortality during open operative repair. We report a case of endovascular treatment of an RAAA with ACF. After accessing both common femoral arteries, a bifurcated aortic stent graft was placed. Subsequently, we accessed the fistula from the right femoral vein and a cava vein angiography showed a persistent massive flow from the cava to the excluded aneurysm sac. We proceeded by covering the fistula with an Excluder aortic stent-graft cuff to prevent pressurization of the aneurysm sac and secondary endoleaks. This procedure is feasible and may reduce the chances of posterior endoleaks., (Copyright © 2014 Elsevier Inc. All rights reserved.)

We describe a case of Kommerell's diverticulum involving the distal portion of a right-sided aortic arch and the origin of an aberrant left subclavian artery (LSA). The patient underwent a total endovascular repair with the use of a modified Valiant endograft (Medtronic, Minneapolis, Minn) to which a branch was attached to keep LSA patency. Postoperative computed tomography showed complete exclusion of the lesion, without endoleaks. The use of "customized off-label" devices to treat special conditions was feasible in this case, keeping patency of the LSA without risk of arm claudication or the requirement for a complementary surgical bypass., (Copyright © 2013 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.)

Purpose: To establish a correlation between intrasac pressure measurements of a pressure sensor and an angiographic catheter placed in the same aneurysm sac before and after its exclusion by an endoprosthesis., Methods: Patients who underwent endovascular abdominal aortic aneurysm repair and received an EndoSure wireless pressure sensor implant between March 19 and December 11, 2004 were enrolled in the study. Simultaneous readings of systolic, diastolic, mean, and pulse pressure within the aneurysm sac were obtained from the catheter and the sensor, both before and after sac exclusion by the endoprosthesis (Readings 1 and 2, respectively). Intrasac pressure measurements were compared using Pearson's correlation and Student's t test. Statistical significance was set at p<0.05., Results: Twenty-five patients had the pressure sensor implanted, with simultaneous readings (i.e., recorded by both devices) obtained in 19 patients for Reading 1 and in 10 patients for Reading 2. There was a statistically significant correlation for all pressure variables during both readings, with p<0.01 for all except the pulse pressure in Reading 1 (p<0.05). Statistical significance of pressure variations before and after abdominal aortic aneurysm exclusion was coincident between the sensor and catheter for diastolic (p>0.05), mean (p>0.05), and pulse (p<0.01) pressures; the sole disagreement was observed for systolic pressure, which varied, on average, 31.23 mmHg by the catheter (p<0.05) and 22 mmHg (p>0.05) by the sensor., Conclusion: The excellent agreement between intrasac pressure readings recorded by the catheter and the sensor justifies use of the latter for detection of post-exclusion abdominal aortic aneurysm pressurization.

Objective: Complete exclusion and depressurization of the aneurysm sac is the prime goal of endovascular repair (EVAR) of abdominal aortic aneurysms. Thus, any EVAR that results in a type I or III endoleak has been classified as a technical failure. The current method to detect endoleaks uses intraoperative aortography. However, aortography is limited by its subjective nature, inability to quantify the significance of the endoleak, and artifacts such as bowel gas that may mimic an endoleak. In addition, repetitive contrast injection may impair renal function. To increase the efficacy and safety of intraoperative endoleak detection, a wireless pressure-monitoring system has been developed and tested in the clinical setting., Methods: The APEX trial (Acute Pressure Measurement to Confirm Aneurysm Sac EXclusion) is a prospective, multicenter/international trial sponsored by CardioMEMS to evaluate the safety and efficacy of the EndoSure wireless pressure sensor for EVAR. The 30 x 5 x 1.5-mm sensor contains no battery and is powered externally with radiofrequency energy. The sensors are extremely stable, operate over the full physiologic range of pressures, and have a resolution of 1 mm Hg. A total of 90 patients were enrolled at 12 sites, 76 of whom were eligible for analysis. The sensor was implanted via the contralateral femoral artery at the time of EVAR. The sac pulse pressure was measured with both an angiographic catheter and the sensor after deployment of the main endograft but before the deployment of the contralateral limb (type I endoleak equivalent). Sac pressure was again measured with the sensor after deployment of the contralateral limb and completion of the EVAR. Data were collected in a prospective manner., Results: In all of the eligible patients (n = 76), the initial sensor pressure measurement agreed closely with the angiographic catheter pressure measurement of the type I endoleak equivalent. At the completion of the procedure, there was agreement between the sensor measurement and angiography regarding the presence or absence of a type I or III endoleak in 92.1% (n = 70) of the measurements. Overall, the sensitivity was 0.94 and the specificity was 0.80 for detecting type I or III endoleaks. Final pulse pressures decreased significantly compared with baseline measurements., Conclusions: Implantation of the wireless pressure sensor is safe, and remote aneurysm sac pressure sensing is feasible. It was a valuable guide in evaluating the completeness of the EVAR procedure. Long-term study will be needed to prove its efficacy for postoperative surveillance.