Search

Structural relaxation is a well-known phenomenon in amorphous materials such as amorphous solid dispersions. It is generally understood as a measure for molecular mobility and has been shown to impact certain material properties such as the dissolution rate. Several quantification methods to evaluate structural relaxation using differential scanning calorimetry have been proposed in the past, but all approaches exhibit disadvantages. In this work, a mathematical model was developed and fitted to calorimetric data enabling the analysis of the structural relaxation enthalpy by separating the structural relaxation peak from the underlying glass transition. The proposed method was validated using a parameter sensitivity analysis. Differently stressed amorphous samples were analyzed applying the new model and the results were compared to commonly applied quantification methods in literature. The proposed method showed high robustness and accuracy and overcame the observed disadvantages of the established methods. The heating rate dependence of the calculated structural relaxation enthalpy was in accordance with theoretical considerations of previous studies, supporting the validity of the results. Thus, the proposed model is suitable to accurately quantify the degree of structural relaxation and should be a valuable tool for further investigations regarding the impact of structural relaxation on material properties., (Copyright © 2019 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Embedding a poorly water-soluble drug as a solid dispersion in a hydrophilic carrier by cogrinding is a possible strategy for enhancing the drug dissolution rate. Although general interest in continuous processes for manufacturing drug formulations has increased, many publications still focus on batch processes. The jet mill used in this study is a promising tool for continuous cogrinding. Investigation of different drug-to-carrier ratios (griseofulvin/mannitol) demonstrated that a drug load of 10% is best suited to investigate the enhanced dissolution behavior. To gain deeper insight into the underlying mechanisms, the coground dispersion is compared with different physical mixtures in terms of physicochemical properties and dissolution behavior. Differential scanning calorimetry and X-ray powder diffraction were used to verify the crystalline structure of the coground formulation. On the basis of the Hixson-Crowell model, particle size reduction was ruled out as the main reason for dissolution enhancement. An increase of surface free energies because of grinding is shown with contact angle measurements. Confocal Raman microscopy investigations revealed the drug's bulk dispersity in the coground formulation as an additional factor for the increased dissolution rate. In conclusion, the continuous cogrinding approach is a promising technique to prepare the drug in a rapidly dissolving, yet crystalline, form., (© 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.)

In order to elucidate the role of the flow-through characteristics with regard to the column performance in high-performance liquid chromatography (HPLC) native and n-octadecyl bonded monolithic silica rods and columns, respectively of 100 mm length and 4.6 mm ID with mesopores in the range between 10 and 25 nm and macropores in the range between 0.7 and 6.0 microm were examined by mercury intrusion/extrusion, scanning electron microscopy, image analysis and permeability. The obtained data of the flow-through pore sizes and porosity values as well as surface-to-volume ratio of the stationary phase skeleton enabled to predict their influence to the chromatographic separation efficiency. Our data demonstrate that mercury porosimetry is a reliable technique to obtain all the characteristic parameters of the flow-through pores of silica monoliths. An important result of our examination was that the surface-to-volume ratio of monolithic silica skeletons had more significant impact to the separation process, rather than the average flow-through pore sizes. We could also show the essential differences between the particulate and monolithic stationary phases based on theoretical computation. The results, obtained from other characterization methods also indicated the structural complexity of monolithic silica samples. Permeability of columns is a generally applicable parameter to characterize all chromatographic phases no matter the chemistry or format. The correlation coefficient obtained for mercury intrusion and permeability of water was 0.998, though our investigation revealed that the surface modification is more likely influencing the obtained results. Further, the assumption of the cylindrical morphology of flow-through pores is not relevant to the investigated monolithic silica columns. These results on the morphology of the flow-through pores and of the skeletons were confirmed by the image analysis as well. Our main finding is that the flow-through pore sizes are not relevant for the estimation of the chromatographic separation efficiency of monolithic silica columns.

Native and n-alkyl-bonded (n-octadecyl) monolithic silica rods with mesopores in the range between 10 and 25 nm and macropores in the range between 1.8 and 6.0 microm were examined by mercury intrusion/extrusion, inverse size exclusion chromatography (ISEC) and nitrogen sorption. Our results reveal very good agreement for the mesopore size distribution obtained from nitrogen adsorption (in combination with an advanced NLDFT analysis) and ISEC. Our studies highlight the importance of mercury porosimetry for the assessment of the macropore size distribution and show that mercury porosimetry is the only method which allows obtaining a combined and comprehensive structural characterization of macroporous/mesoporous silica monoliths. Our data clearly confirm that mercury porosimetry hysteresis and entrapment have different origin, and indicate the intrinsic nature of mercury porosimetry hysteresis in these silica monoliths. Within this context some silica monoliths show the remarkable result of no entrapment of mercury after extrusion from the mesopore system (i.e. for the first intrusion/extrusion cycle). The results of a systematic study of the mercury intrusion/extrusion behavior into native silica monoliths and monoliths with bonded n-alkyl groups reveals that the macro (through) pore structure, which controls the mass transfer to and from the mesopores, here mainly controls the entrapment behavior. Our data suggest that mercury intrusion/extrusion porosimetry does not only allow to obtain a comprehensive pore structure analysis, but can also serve as a tool to estimate the mass transport properties of silica monoliths to be employed in liquid-phase separation processes.