Search

Introduction and Aims: This study aimed to evaluate the relative dentin abrasivity of whitening toothpastes containing acids using the Radioactive Dentin Abrasivity - Profilometry Equivalent (RDA-PE)., Methods: A total of 100 bovine dentin specimens were prepared and assigned to the following groups (n = 10): 5 hydrogen peroxide (HP) whitening toothpastes (WTH1-WTH5) with or without acid (citric acid, ethylenedinitrilotetraacetic acid disodium, and phosphoric acid), 2 whitening toothpastes with silica and containing citric or phosphoric acid (WTS1 and WTS2), one conventional toothpaste (CT), and 2 reference slurries (RS). All specimens were brushed for 4,000 or 10,000 strokes using toothbrush and toothbrushing machine. The average dentin depth was measured using a noncontact profilometery, and the RDA-PE value was calculated based on the RS. The pH of the solution, average particle size, particle content, and particle hardness were measured. The RDA-PE data were analysed using one-way analysis of variance and Tukey's test, and the effects of the 4 measured factors on RDA-PE were investigated via multiple regression analysis., Results: The RDA-PE values of the HP whitening toothpastes (mean value: 19-46) were significantly lower, whereas those of the silica whitening toothpastes (80 or 111) were similar to those of the RS after 4,000 strokes (100). The RDA-PE values of all whitening toothpastes were significantly lower than the RS values after 10,000 strokes (242). The HP whitening toothpastes were slightly acidic (pH ≤6) compared to the other solutions. The HP (2.9%-3.7%) and silica (8.9% or 9.9%) whitening toothpastes had significantly lower particle content than RS (16.6%). The particle content significantly influenced the RDA-PE values by multiple regression results., Conclusions: The RDA-PE values of whitening toothpastes varied. The particle content in the solution was a key factor affecting the RDA-PE value., Clinical Relevance: Whitening toothpastes containing acids did not cause significant dentin abrasion., Competing Interests: Conflict of interest None disclosed., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Objective: To compare profilometry and microhardness of polished occlusal and buccal human enamel following a mechanical and chemical wear regime., Methods: Enamel from polished human molars were sectioned into buccal and occlusal surfaces and randomly allocated into two groups (n = 10) and then exposed to 0.3 % citric acid at pH 2.7 for 10, 20, 40 and 60 mins each followed by abrasion with non-fluoridated toothpaste for 240 strokes in a reciprocating brushing machine. A white light profilometer with a spot size of 12 um measured mean step-height following each cycle. Microhardness indentations were conducted following the final cycled 60 mins erosion/abrasion using 0.01, 0.02, 0.1, 0.5 and 2.5 kgf indentation load. Statistical disparity were evaluated using a two-way ANOVA and post-hoc Sidak's multiple comparisons tests at α = 0.05., Results: After erosion/abrasion, the mean (SD) step-heights on occlusal and buccal surfaces were not significantly different until 60 mins, when occlusal surfaces exhibited greater step-heights, 32.9 µm (2.8) and 31.1 µm (1.8) and p = 0.02, respectively. Buccal and occlusal microhardness was statistically lower following erosion/abrasion at loads of 0.01 kgf (p = 0.0005) and 0.02 kgf (p = 0.0006) but no significant differences were observed in the microhardness between the surfaces at any loads., Conclusion: The occlusal and buccal surfaces were not statistically different for microhardness or step height suggesting the susceptibility to wear is not related to the anatomy and structure of the tooth and is more likely related to other factors such as the environment., Clinical Significance: The study emphasizes that a notable difference in wear between occlusal and buccal enamel surfaces emerges only after prolonged exposure to simultaneous chemical and mechanical stress. This finding necessitates a preventive dental approach that accounts for both the duration of exposure and environmental factors., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Objective: To investigate the effect of toothbrush head configuration and dentifrice slurry abrasivity on the development of simulated non-carious cervical lesions (NCCLs) in vitro., Methods: Extracted premolars were randomly allocated into 15 groups (n = 16) generated by the association between toothbrush head configuration (flat-trimmed, rippled, cross-angled/multilevel/rubbers added, cross-angled/multilevel/flex head, feathered) and dentifrice slurry abrasivity (low/medium/high). Teeth were mounted on acrylic blocks and had their roots partially covered with acrylic resin, leaving 2-mm root surfaces exposed. Toothbrushing was performed for 35,000 and 65,000 double-strokes. Specimens were analyzed using non-contact profilometry for dental volume loss (mm 3 ) and lesion morphology. Data was analyzed using ANOVA with pairwise comparisons and Kruskal-Wallis tests., Results: The two-way interaction between toothbrush head configuration and slurry abrasivity was significant (p = 0.02). At 35,000 strokes, the flat-trimmed and cross-angled/multilevel/rubbers added toothbrushes caused the highest loss, when associated to the high-abrasive slurry (p<0.05); whereas cross-angled/multilevel/flex head showed the least loss, when associated to the low-abrasive (p<0.05). At 65,000, more dental loss was observed for all toothbrushes when associated to the high-abrasive slurry, with flat-trimmed causing the highest loss (p < 0.05). Lower dental loss rates were observed for cross-angled/multilevel/flex head associated to the low-abrasive slurry when compared to the other toothbrushes (p < 0.05), except to feathered (p = 0.14) and rippled (p = 0.08). Flat lesions (mean internal angle ± standard-deviation: 146.2°± 16.8) were mainly associated with low-abrasive slurry, while wedge-shaped lesions (85.8°± 18.8) were more frequent with medium- and high-abrasive slurries., Conclusion: The development, progression and morphology of simulated NCCLs were modulated by both toothbrush head configuration and dentifrice abrasivity., Clinical Significance: Dental professionals should consider both the type of toothbrush and dentifrice abrasivity in the management plan of patients at risk of developing NCCLs., Competing Interests: Declaration of Competing Interest We wish to confirm that there are no known conflicts of interest associated with this publication and there has been no significant financial support for this work that could have influenced its outcome., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Objectives: This study compared the surface change on natural and polished enamel exposed to a joint mechanical and chemical wear regimen., Methods: Human enamel samples were randomly assigned to natural (n = 30) or polished (n = 30) groups, subjected to erosion (n = 10, 0.3% citric acid, 5 min), abrasion (n = 10, 30 s), or a combination (n = 10). Wear in the form of step height was measured with a non-contact profilometer, and surface changes were inspected with SEM on selected sections. Data was normalised and underwent repeated measures MANOVA, accounting for substrate and erosive challenge as independent variables, with Bonferroni correction for significant post hoc interactions., Results: After four cycles, polished samples had mean step heights of 3.08 (0.40) μm after erosion and 4.08 (0.37) μm after erosion/abrasion. For natural samples, these measurements were 1.52 (0.22) μm and 3.62 (0.39) μm, respectively. Natural surfaces displayed less wear than polished surfaces under erosion-only conditions (p<0.0001), but the difference disappeared with added abrasion. SEM revealed a shallow subsurface layer for polished surfaces and natural ones undergoing only erosion. However, natural surfaces exposed to both erosion and abrasion showed deeper subsurface changes up to 50 µm., Conclusion: Natural enamel, when exposed to erosion alone, showed less wear and minimal subsurface alterations. But with added abrasion, natural enamel surfaces saw increased wear and notable subsurface changes compared to polished ones., Clinical Significance: The pronounced subsurface lesions observed on eroded/abraded natural enamel surfaces highlight how combined wear challenges may accelerate tooth tissue loss., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing interests or personal relationships that has influenced the work presented in this paper. The authors would like to acknowledge the BBSRC iCase (Grant No. BB/M009513/1) award with Unilever Oral Care (Grant No. MA-2019–0247 N) for their support., (Crown Copyright © 2023. Published by Elsevier Ltd. All rights reserved.)

Aim: The objective of this research was to compare the abrasive potential of dentifrices containing activated charcoal with those of a conventional dentifrice on the development of erosive tooth wear (ETW) in vitro., Methods: Enamel and dentin samples were divided into toothpastes (n = 12): group (G)1-Colgate Triple Action (1450 ppm F) (positive control); G2-Colgate Natural Extracts (1450 ppm F); G3-Colgate Luminous White Activated Carbon (1450 ppm F); G4-Oral-B Whitening Therapy Charcoal (1100 ppm F); G5-Oral-B 3D White Mineral Clean (1100 ppm F); G6-Curaprox Black Is White (950 ppm F); and G7-erosion only (no abrasion, negative control). All samples were submitted to erosive pH cycles and G1 to G6 to abrasive challenges (15 seconds) using toothpastes' slurries plus 45 seconds of treatment for 7 days. The final profile was overlaid to the baseline one for the ETW calculation (µm). The data were subjected to analysis of variance/Tukey or Kruskal-Wallis/Dunn tests (P < .05)., Results: Oral-B 3D White (13.0 ± 1.0, 9.37 [1.36] μm), Oral-B Whitening Therapy (15.1 ± 1.2, 8.58 [1.71] μm), and Colgate Luminous White (13.6 ± 1.0, 7.46 [0.94] μm) toothpastes promoted the greatest enamel and dentin wear. On the other hand, Colgate Triple Action (12.2 ± 1.2, 5.30 [1.26] μm), Colgate Natural Extracts (10.8 ± 1.1, 4.16 [1.11] μm), and Curaprox Black Is White (11.5 ± 1.5, 4.06 [0.92] μm) toothpastes promoted lower wear values, similar to erosion only (4.16 [0.94] μm) in the case of dentin but not enamel (7.1 ± 0.8 μm)., Conclusions: Toothpastes containing charcoal combined with pyrophosphate may have a high abrasive effect on eroded tooth surfaces. Many patients influenced by digital marketing use toothpastes containing activated charcoal with the aim of bleaching their teeth. However, care should be taken when using these products, as they may have a high abrasive effect., Competing Interests: Conflict of Interest None disclosed., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Objective: To investigate the influence of different ultra-soft toothbrushes on the progression of erosive tooth wear (ETW)., Methods: Bovine enamel and dentin specimens (n = 10) were submitted to a 5-day erosive-abrasive cycling model (0.3% citric acid for 5 min, artificial saliva for 60 min, 4x/day). Toothbrushing was carried out 2x/day for 15 s, with the different toothbrushes tested (A- Edel White: flexible handle, tapered bristles; B- Oral-B Gengiva Detox: regular handle, criss-cross tapered bristles; C- Colgate Gengiva Therapy: flexible handle, tapered bristles, high tuft density; d- Oral-B Expert Gengiva Sensi: regular handle, round end bristles, high tuft density; E- Oral-B Indicator Plus: soft brush, round end bristles (control). Surface loss (SL, in μm) was assessed by optical profilometry. The toothbrush characteristics were evaluated by a surgical microscope. Data were statistically analyzed (α=0.05)., Results: For enamel, toothbrush C showed the highest SL (means±SD: 9.86 ± 1.28) and it did not differ significantly from A (8.60 ± 0.50), both with flexible handles. The lowest SL was observed for the toothbrush Control E (6.76 ± 0.63), which differed significantly from A and C, but not from the other toothbrushes. For dentin, the highest SL was found for toothbrush D (6.97 ± 1.05) and it did not differ significantly from E (6.23 ± 0.71). The lowest SL was observed for B (4.61 ± 0.71) and C (4.85 + 0.83), without significant differences from A (5.01 ± 1.24)., Conclusions: The ultra-soft toothbrushes had different impacts on the progression of ETW on the dental substrates. On enamel, higher ETW values were observed for the flexible handle toothbrushes, while for dentin, round-end bristles (ultra-soft and soft) caused more ETW., Clinical Significance: Knowledge about the effect of different ultra-soft toothbrushes on ETW can help clinicians to recommend the most suitable types for their patients, bearing in mind that toothbrushes can impact enamel and dentin differently., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Objective: To investigate the effect of different types of manual toothbrushes and brushing loads on the progression of erosive tooth wear (ETW) on enamel., Methods: Bovine enamel specimens (n = 10) were submitted to a 5-day erosive-abrasive cycling model (0.3 % citric acid for 5 min, artificial saliva for 60 min, 4x/day). Toothbrushing was carried out 2x/day for 15 s, according to the toothbrushes tested (ultra-soft (a): Curaprox 5460; ultra-soft (b): Sensodyne Repair & Protect; soft (a): Colgate Slim Soft; soft (b): Oral-B Indicator Plus; medium: Johnson's Professional; hard: Tek) and brushing loads (1.5 N, 3 N). Surface loss (SL, in μm) was assessed by optical profilometry on conclusion of the cycling. Some of the toothbrush characteristics were evaluated. Data were statistically analyzed (α = 0.05)., Results: For the 1.5 N load, the hard brush showed the highest SL value, with statistical significance. The other toothbrushes did not differ significantly, except that ultra-soft (a) caused significantly higher SL than ultra-soft (b). For the 3 N load, hard and soft (a) exhibited the highest SL. Soft (b) and medium had the lowest SL value, with statistical significance. Only soft (a) and ultra-soft (b) showed significant difference between loads, with lower SL for the load of 1.5 N. None of the toothbrush characteristics were significantly correlated with SL., Conclusions: Although different degrees of enamel surface loss were observed with use of the different toothbrushes, no association was found between the toothbrush characteristics and SL. Depending on the toothbrush, the force of brushing was capable of modulating the ETW of enamel. Based on the brushing loads usually applied by healthy individuals, hard brushes are not recommended for use by patients with ETW., Clinical Significance: The use of hard bristle brushes is not recommended for use by individuals who exert healthy forces when brushing their teeth. The toothbrush characteristics are of secondary importance in terms of causing enamel loss in ETW., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Objectives: To assess the interplay between dietary acid intake, toothbrushing and erosive tooth wear as aetiological factors in self-reported DH MATERIALS AND METHODS: This is a secondary analysis on previously collected data from 600 participants with (n=300) and without (n=300) severe erosive tooth wear. Participants recruited from restorative clinics of King's College London Dental Institute (REC Ref 14/EM/1171) were questioned on their self-reported DH, frequency and timing of dietary acid intake, habits associated with consumption of dietary acids and tooth brushing habits. Erosive tooth wear was assessed using Basic Erosive Wear Examination (BEWE). Differences in diet and brushing habits between those with self-reported DH and those without were analysed using descriptives and logistic regression in SPSS vers. 24., Results: Of those reporting with DH (n=272), a greater number spent ≥10min eating fruit per sitting, (n=46) and had a drinking habit such as sipping, swishing or holding drinks in the mouth (n=72) compared to those without DH (n=26 OR 2.72, 95%CI [1.32-5.61], p=0.007 and n=38 OR2.33, 95%CI [1.40-3.88], p=0.001, respectively). More DH participants used a soft toothbrush (n=36) compared to those without DH (n=18 OR 2.35, 95%CI [1.20-4.59], p=0.013). No association was observed with frequency of daily toothbrushing or dietary acid intake., Conclusion: Contact time between the tooth and the acid may be a more important risk factor for DH compared to frequency of dietary acid intake or frequency of toothbrushing. Other possible aetiological factors should be considered. CLINICALTRIALS., Gov Number: NCT02449434 CLINICAL SIGNIFICANCE: Increased contact time with dietary acids and sipping swishing or holding drinks in the mouth prior to swallowing should be addressed as an aetiological factor in DH. Toothpaste abrasivity and toothbrush filament stiffness may play a greater role in DH compared to frequency of toothbrushing., (Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.)

Objectives: To investigate the loss of enamel and dentin surface caused by the interaction between abrasives in toothpaste and toothbrush filament stiffness., Methods: The study followed a 2 (high-level or low-level abrasive; silica) × 3 (filament stiffness; soft, medium or hard) × 2 (cycling time; 3 or 5 days) factorial design. Polished bovine enamel and dentin specimens (n = 8 each per group) were subjected to 5 days of erosion/abrasion cycling: erosion (5 minutes, four times daily, 0.3% citric acid, pH 3.75); abrasion (15 seconds, twice daily, 45 strokes each, 150 g load, automated brushing machine); and fluoride treatment [15 seconds with abrasion and 45 seconds without abrasion; 275 p.p.m. fluoride (F - ) as sodium fluoride (NaF) in abrasive slurry]. Enamel and dentin specimens were exposed to artificial saliva between erosion and abrasion/F - treatment (1 hour) and at all other times (overnight). Non-contact profilometry was used to determine surface loss (SL) after 3 and 5 days of cycling. Data were analysed using three-way analysis of variance (ANOVA) (factors: abrasive/filament stiffness/time), with separate analyses conducted for enamel and dentin., Results: For enamel, only 'cycling time' was found to affect SL, with 5 days of cycling resulting in a greater SL than 3 days of cycling. Overall, there was little SL for enamel (range: 0.76-1.85 μm). For dentin (SL range: 1.87-5.91 μm), significantly higher SL was found for 5 days of cycling versus 3 days of cycling, with particularly large differences for hard stiffness/high-level abrasive and medium stiffness/low-level abrasive. For high-level abrasive, after 5 days of cycling hard stiffness resulted in significantly higher SL than did medium stiffness, with no other significant differences according to stiffness. Overall, high-level abrasive resulted in significantly higher SL than did low-level abrasive, with strong effects for all combinations, except medium stiffness after 5 days., Conclusion: The interplay between abrasivity and filament stiffness appears to be more relevant for dentin than for enamel., (© 2017 FDI World Dental Federation.)

Background: Toothpastes can be formulated with different abrasive systems, depending on their intended clinical application. This formulation potentially affects their effectiveness and safety and, therefore, requires proper understanding. In this article, the authors focused on abrasive aspects of toothpastes containing sodium bicarbonate (baking soda), which have gained considerable attention because of their low abrasivity and good compatibility, while providing clinical effectiveness (further detailed in the other articles of this special issue). The authors first appraised the role of toothpaste abrasivity on tooth wear, exploring some underlying processes and the existing methods to determine toothpaste abrasivity., Types of Studies Reviewed: The authors reviewed the available data on the abrasivity of toothpastes containing baking soda and reported a summary of findings highlighting the clinical implications., Conclusions: On the basis of the collected evidence, baking soda has an intrinsic low-abrasive nature because of its comparatively lower hardness in relation to enamel and dentin. Baking soda toothpastes also may contain other ingredients, which can increase their stain removal effectiveness and, consequently, abrasivity., Practical Implications: Even those formulations have abrasivity well within the safety limit regulatory agencies have established and, therefore, can be considered safe., (Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.)

Objective: The aim of this study is to characterize the morphological and histological features of NCCLs in a group of extracted teeth using a focus variation optical microscopic technique that is capable of detecting minute variation in surface topography., Methods: Twenty three extracted teeth containing NCCLs were collected. Histological features of the surface and longitudinal cross sections were examined using a focus variation microscope (FVM)., Results: The sample included 8 teeth with wedge-shaped lesions; the remaining 15 contained saucer-shaped lesions. Wedge-shaped lesions showed obliterated dentinal tubules, parallel furrows and micro-fractures in the surface; longitudinal cross sections revealed subsurface micro-fractures extending toward the pulp chamber. The surfaces of typical saucer-shaped lesions were smooth and relatively featureless., Conclusions: FVM imaging shows microstructures that are consistent with simultaneous erosion and toothbrush abrasion. Saucer shaped lesions have a smooth featureless surface as well as craters and dimples that could be attributed to uneven acid attack. In wedge-shaped lesions, the presence of scratches and furrows could be attributed to mechanical forces such as tooth brush abrasion. The furrows and in-surface micro-factures of wedge shaped lesions suggest a possible role of tensile stresses but require further investigation., Clinical Significance: NCCLs present in two morphologies, either saucer-shaped or wedge-shaped. Erosion and toothbrush abrasion are important in both types of lesions. Tensile stresses due to occlusal loading may be important in some wedge-shaped lesions. Knowing the etiology of cervical lesions is the key for their prevention., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Bruxism is defined as repetitive activity of the masticatory muscles, characterized by clenching the teeth or teeth grinding and/or by tapping and swaying. This study investigated sleep bruxism. The etiology is multifactorial: mainly central (neuropathic disorder, anxiety) but also genetic and local (posture, mouth breathing). The diagnosis is based primarily on the anamnesis and examination of dental wear and progression over time (photos and dental castings). A diagnostic guide is proposed in this article. Frequently found in children, bruxism is not always considered pathological. The severity criteria relate intensity (number of dental attrition facets) as well as the context found in children: anxiety, ventilation disorders, and fragile dental structures. Management is multidisciplinary and depends on the etiologic diagnosis., (Copyright © 2017 Elsevier Masson SAS. All rights reserved.)

Objectives: To investigate the effects of a 5% NovaMin containing dentifrice on dentine tubule patency and surface roughness at 100g and 400g tooth brush abrasion forces., Methods: 75 polished human dentine samples were prepared and randomly allocated into one of five groups; control (1), Na 2 PFO 3 100g abrasion force (2), NovaMin 100g (3), Na 2 PFO 3 400g (4) and NovaMin 400g (5). The control group underwent two 2-min cycles of artificial saliva (AS), one 2-min erosion cycle; the rest underwent two toothbrush abrasion cycles in an AS/dentifrice slurry and one 2-min erosion cycle. All samples were imaged at baseline and post intervention using Tandem Scanning Microscopy and Profilometry to analyse tubule patency and roughness., Results: Mean tubule patency increased significantly between baseline and post intervention in groups 1,2 and 4 and decreased significantly post intervention in groups 3 and 5 (p<0.01). Post intervention, there were statistically significant differences in mean patent tubules between NovaMin and the Na 2 PFO 3 and control groups (p<0.001). Surface roughness increased for all groups between baseline and post interventions (P<0.001); mean (SD) roughness increases for groups 1, 2, 3, 4 and 5 were 0.14 (0.05) μm, 0.18 (0.04) μm, 0.16 (0.06) μm, 0.19 (0.07) μm and 0.21 (0.02) μm respectively. Differences between group 1 and 5 were significant (p<0.01)., Conclusions: Brushing with NovaMin resulted in significant dentine tubule occlusion at 100g and 400g, but brushing with Na 2 PFO 3 resulted in increased tubule patency. Surface roughness increased significantly at 400g brushing with NovaMin. There was no correlation between tubule patency and surface roughness., Clinical Significance: A NovaMin desensitising dentifrice resulted in tubule occlusion even at high brushing forces. There was minimal increase in surface roughness at the lower (100g) brushing force., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Objectives: This study investigated previous hypotheses that the tongue can abrade acid softened/eroded enamel surfaces., Methods: Twelve upper removable appliances each retaining 2 anterior and 2 posterior human enamel specimens were constructed. Each specimen was exposed to acid on both surfaces, but only one surface was allowed contact with the tongue. Therefore, 96 surfaces were assessed. Appliances were worn from 9.30 to 17.00 Monday to Friday for 22days. Acid eroded lesions were created by immersing the specimens for 5min in 50ml orange juice three times daily. Enamel loss was measured using Quantitative light- induced fluorescence (QLF) and Non- contact profilometry (NCLP) and the differences (D) between tongue (D t ) and palate facing (D P ) surfaces determined., Results: %ΔF D(t-p) from the two anterior specimens were greater than from those placed posteriorly with mean values of 15.9% (±9.1) and 14.4% (±8.4), 5.6% (±8.7) and 4.5% (±6.6) respectively. Similarly, NCLP data showed anterior specimens had greater differences for mean step height (MSH) between tongue- facing and the palate- facing (control) surfaces than posterior specimens. MSH D(t-p) values were 59.4μm (±30.3) for anterior tongue facing surfaces and 55.5μm (±29.4) for posterior palate facing surfaces. For the posterior specimens MSH was 48.1μm (±26.1) and 51.7μm (±30.4) respectively (p<0.05)., Conclusion: The greater enamel surface loss of the anterior specimens demonstrates that abrasion by the tongue on acid softened/eroded enamel in situ is likely., (Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.)

Objectives: To investigate the abrasive effect of the tongue on human enamel loss with and without a prior dietary acid challenge in an in situ model., Methods: A single centre, single blind, randomly allocated, split mouth, four treatment regimen, in situ study in healthy adult volunteers was undertaken. Twenty four subjects wore two lower intra-oral appliances each fitted with 4 human enamel samples 6h/day for 15 days. The samples were treated with either 50ml orange juice or water for 5min ex vivo 4x/day; prior to being licked or not licked with the subject's tongue for 60s. There were 2 samples per group per subject. Surface loss was measured by contact profilometry., Results: 23 subjects completed the study with no adverse events. The mean loss of enamel at 15days was: 0.08μm for water without licking, 0.10μm with water and licking; 1.55μm with orange juice alone, 3.65μm with orange juice and licking. In the absence of erosive challenge, licking had no detectable effect on enamel loss p=0.28. Without licking, orange juice had a highly significant effect on loss compared to water, p<0.001. Erosive challenge followed by licking more than doubled the loss of enamel p<0.001., Conclusions: When enamel was exposed to orange juice prior to licking, tissue loss as a result of tongue abrasion of the eroded surface was increased, and double that of the erosive challenge alone. Licking enamel with the tongue had no perceptible effect on enamel loss in the absence of the erosive challenge., Clinical Significance: Enamel wear resulting from tongue abrasion on tooth surfaces softened by acid challenge, can be an unavoidable consequence of oral function. This may account for the pattern of erosive toothwear on palatal and occlusal tooth surfaces, reinforcing the importance of restricting the frequency of dietary acid challenge in susceptible individuals., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Objectives: This study investigated the effect of tooth brushing force on changes in dentine tubule patency in an erosion-toothbrush abrasion model., Methods: 60 dentine samples prepared with an artificial smear layer and divided randomly into control (no toothbrush), 100 g, 200 g or 400 g toothbrush groups. They were immersed in 3:1 artificial saliva/NaF 1450 ppm and either brushed (p35 soft tooth brush; 120 strokes) or not brushed. Then samples were subjected to agitated acid challenge (0.3% citric acid pH2.6 for 2 min). Finally, samples were re-brushed. Calibrated software calculated patent dentine tubules that cause DH in confocal microscopy images taken of samples at each stage., Results: At baseline, mean patent tubules in all samples were 188 (SD54) with no significant inter-group differences. Following first brushing, mean patent tubules decreased using 100 g to 150 (SD32) (p<0.01) and increased using 400 g to 215 (SD45) (p=0.02). Following acid challenge, patent tubules increased to 218 (SD40) in all samples (p<0.01) with no significant inter-group differences. Following further brushing, mean patent tubules decreased using 100 g to 175 (SD72) (p<0.01), but increased with 400 g to 232 (SD52)., Conclusions: At higher brushing forces (400 g), more tubules were exposed. At lower brushing forces (100 g), tubule patency decreased even post-acidic challenge., Clinical Significance: It is often recommended to our patients with DH to brush using lighter brushing forces but our understanding of this force on dentine tubule patency is unknown. The management of DH requires lighter brushing forces to reduce the numbers of patent dentine tubules., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Objectives: To summarise the chemical, biological and host factors that impact enamel mineral loss, to highlight approaches to contemporary management of clinical conditions involving mineral loss and summarise emerging trends and challenges in this area., Data Sources: "Medline" and "Scopus" databases were searched electronically with the principal key words tooth, enamel, *mineral*, caries and erosion. Language was restricted to English and original studies and reviews were included. Conference papers and abstracts were excluded., Conclusions: Enamel mineral loss leads to the degradation of the surface and subsurface structures of teeth. This can impact their shape, function, sensitivity and aesthetic qualities. Dental caries is a multifactorial disease caused by the simultaneous interplay of dietary sugars, dental plaque, the host and time. There is a steady decline in dental caries in developed countries and the clinical management of caries is moving towards a less invasive intervention, with risk assessment, prevention, control, restoration and recall. Tooth wear can be caused by erosion, abrasion and attrition. Dental erosion can be the result of acid from intrinsic sources, such as gastric acids, or extrinsic sources, in particular from the diet and consumption of acidic foods and drinks. Its prevalence is increasing and it increases with age. Clinical management requires diagnosis and risk assessment to understand the underlying aetiology, so that optimal preventative measures can be implemented. Overall, prevention of enamel mineral loss from caries and tooth wear should form the basis of lifelong dental management. Evidence based oral hygiene and dietary advice is imperative, alongside preventive therapy, to have a healthy lifestyle, whilst retaining hard tooth tissue., (© 2014 Elsevier Ltd. All rights reserved.)

Objectives: To determine if brushing dentine with 2 moderate RDA desensitising toothpastes, results in a significant dentine wear difference and whether this difference continues to be relevant when preceded with an erosive challenge., Methods: An in situ, single centre, single blind, randomised, split mouth study, evaluated the difference in abrasion of 2 toothpastes (SFM - Sensodyne Fresh Mint(®) RDA 70; CPHM - Crest Pro-Health Clean Mint(®) RDA 120) in 28 healthy volunteers. Two toothpaste treatments were administered 3×/day, for each of the two 15 day periods, subjects wearing bi-lateral, lower buccal appliances each with 4 dentine sections. A 2 min extra-oral acidic challenge preceded toothbrushing for 2 study arms. Contact profilometry measured samples at baseline, days 5, 10 and 15., Results: Brushing with SFM was significantly less abrasive than brushing with CPHM at all time points, with or without a preceding acidic challenge (p<0.0001). The additional dentine loss arising from the erosive challenge prior to brushing with each paste was linear with time and independent of abrasive effect., Conclusions: The desensiting toothpastes' RDA, directly related to dentine loss with toothbrushing. An acidic challenge prior to brushing did not negate the benefits of reduced wear from the lower RDA paste compared to the higher RDA paste. When brushing eroded dentine, the additional wear appeared independent of abrasive effect. Dentine hypersensitivity sufferers should be recommended to use a low-moderate RDA toothpaste, not to brush more than 2×/day and not immediately following an acidic challenge., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Objectives: To investigate the effect of a single application of highly concentrated SnF(2) and NaF solutions and a NaF/CaF(2) varnish on human enamel subjected to hydrochloric acid erosion and tooth brush abrasion., Methods: Forty enamel samples were prepared from human third molars and NaF (9500ppm, pH 8.0), SnF(2) (9500ppm, pH 2.6) solutions; Bifluorid10(®) varnish (42,500ppm, NaF 5%, CaF(2) 5%) and deionized water (control) was applied to the enamel. Following this three, six and nine cycles of erosion [1 cycle=erosion (0.01M HCl, pH 2.2, 2min)+artificial saliva (1h, pH 7.0)] and erosion-abrasion [1 cycle=erosion (0.01M HCl, pH 2.2, 2min)+artificial saliva (1h, pH 7.0)+abrasion (120 linear strokes in artificial saliva from Tepe medium soft brushes 200g loading)] were carried out. The fluoride treated enamel was analysed using Knoop microhardness, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS)., Results: For erosion alone, there was significantly less microhardness reduction in the Bifluorid10(®) group after three and six cycles of erosion (P<0.05), however no other groups showed statistically different hardness (P>0.05). The EDS analysis showed that only the Bifluorid10(®) group had any detectable fluorine following erosion and erosion-abrasion (0.1wt.% and 0.2wt.% fluorine respectively). The surface fluorine was found to have been removed after erosion and erosion-abrasion for all other surface treatments. Although precipitates were observed after application of the surface treatments, following erosion-abrasion, no visible surface effects from any fluoride preparation remained., Conclusions: Enamel surface precipitates from application NaF, SnF(2) solutions appear to not be able to provide protection against gastric erosion and tooth brush abrasion. The NaF/CaF(2) varnish provided limited protection against erosion but the role for such varnishes in gastric erosion and tooth brush abrasion remains uncertain., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Objectives: The purpose of this study was to report on the management and treatment outcomes of partially edentulous elderly patients with severe tooth wear., Methods: Partially edentulous patients with severe tooth wear who underwent the same protocols for full prosthodontic rehabilitation were eligible for this observational study. Their clinical diagnoses were based on a complete oral examination, photos, functional and cast analysis, general health conditions and behavioural aspects, such as acidic diets and bruxism. A 6-month preliminary phase with splints and provisional prostheses was maintained prior to the final fabrication of fixed and removable prostheses. All patients completed a follow-up period of ≥3years. The outcomes were technical and biological complications with the prosthesis (wear or fracture of anchorage, abutment, prosthesis core or veneering, and implants, plaque index, caries, endodontic and periodontal lesions, tooth fractures and periimplantitis) and oral health-related quality of life (using the oral health impact profile questionnaire, German version of OHIP G-14)., Results: Data from 42 patients (33 men, 9 women) with a mean age of 62±8years were available. The probability that a first, second or third technical complication occurred was 49%, 38% and 21%, respectively. About 50% of the patients remained without any complication. The average OHIP-value was 5±7, which represents high oral health-related quality of life. No statistically significant correlations between the OHIP values and the type of prostheses or the occurrence of complications were observed., Conclusions: From multiple perspectives, the rehabilitation of partially edentulous patients with severe tooth wear is a complex task, and more information regarding treatment protocols, prosthetic indications and treatment outcome is needed., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Background: The authors analyzed the in vitro and in vivo performance of lithium disilicate glass-ceramic (LDGC) restorations and yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) (that is, zirconium oxide) restorations with regard to reliability, clinical performance and abrasion resistance., Methods: In the in vitro study, four authors subjected samples of LDGC, Y-TZP and metal-ceramic crowns to step-stress fatigue testing. Four investigators assessed the in vivo clinical performance of LDGC and zirconium oxide-based restorations at four and seven years, respectively. In addition, one author conducted a randomized, controlled clinical trial to analyze the volumetric loss of enamel and ceramic antagonist surfaces., Results: The LDGC crowns exhibited the highest fatigue load-to-failure values in the in vitro analysis. The results of the in vivo assessment showed that the clinical performance of the LDGC restorations at four years was comparable to that of the zirconium oxide-based crowns at seven years. The results of the in vivo, randomized, controlled clinical trial showed that LDGC crowns were not only resistant to wear, but also were wear friendly to enamel antagonist surfaces., Conclusions: The LDGC crowns in the in vitro and in vivo studies exhibited high durability, and they were wear friendly to opposing natural dentition., Clinical Implications: LDGC and zirconium oxide-based crowns are a clinically acceptable means of treating teeth that require full-coverage restorations. In addition, LDGC materials exhibit excellent clinical performance, as well as demonstrate acceptable abrasion compatibility with the opposing natural dentition.

Objectives: To determine the effect of toothpaste concentration on enamel and dentine wear in vitro and to model the effects of toothpaste abrasion upon dilution during toothbrushing in vivo., Methods: Polished human enamel/dentine specimens were indented with a Knoop diamond and the enamel-dentine junction profiled. Specimens were brushed for 1200s with toothpastes with differing relative dentine abrasivity (RDA), either Toothpaste A (RDA=90) or Toothpaste B (RDA=200), using a toothbrush mounted in a brushing machine. The toothpastes were dispersed in water and 1% sodium carboxymethyl cellulose to give a range of toothpaste concentrations. After brushing the Knoop indent length and the enamel-dentine step were remeasured and the wear to the enamel and dentine calculated. An equation for modelling the decrease in toothpaste concentration with brushing time was found using published in vivo data and used to estimate the level of dentine wear during in vivo brushing., Results: The mean enamel wear was in the range 0.03-0.11μm and there was only a small but non-significant (p>0.05) increase in enamel wear with toothpaste concentration. The mean dentine wear was in the range 0.28-27.63μm and the dentine wear increased significantly (p<0.05) with toothpaste concentration, with Toothpaste B giving more wear than Toothpaste A. Analysis with published in vivo data showed that 50% of dentine wear occurs in the first 20s of brushing and that the wear approaches a plateau value with brushing time as the toothpaste concentration is reduced., Conclusions: Enamel wear increases only slightly with toothpaste concentration whereas dentine wear increases with toothpaste concentration., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Objectives: This in situ study compared the abrasive effect of repeated brushings (over 10 days) of a low relative abrasive dentine (RDA) toothpaste with moderate and high relative abrasive dentine (RDA) toothpastes, on human dentine in situ., Materials and Methods: The study design was single centre, single blind, randomized, split mouth, two period, four-treatment cross-over, in situ study in 20 healthy subjects. Subjects wore bi-lateral lower buccal appliances each fitted with four dentine sections with treatment applied with a power toothbrush, during each 10 day study period. Samples were measured at baseline, day 5 and day 10 by contact profilometry, and baseline and day 10 with non-contact profilometry., Results: Nineteen subjects were included in the efficacy analysis. Results as measured by contact and non-contact profilometry from brushing with the moderate RDA paste and high RDA paste showed significantly (p<0.0001) more abrasion to dentine than brushing with the low RDA paste or water after 10 days. Dentine loss following tooth brushing with the low RDA paste was not significantly different from brushing with water, after 10 days., Conclusions: The methodology successfully showed clear differentiation between the amount of dentine lost following toothbrushing with the low RDA paste compared to the moderate or high RDA pastes. Dentine loss following brushing with the low RDA paste showed a comparable degree of abrasion to brushing with water., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Objectives: The aim of this study was to investigate the effects of erosion and toothbrush abrasion on different restorative materials and human enamel., Methods: Human enamel and 5 kinds of tooth-colored restorative materials were used. The restorative materials included three composite resins (Filtek Silorane, Tetric EvoCeram, and Tetric EvoFlow), a polyacid-modified composite (Dyract Extra), and a conventional glass-ionomer cement (Ketac Fil Plus). For each type of the material, 40 specimens were prepared and embedded in ceramic moulds and divided into four groups (n=10): control group (C), erosion group (E), abrasion group (A), and erosion-abrasion group (EA). The specimens were subjected to six daily erosive attacks (groups E and EA; citric acid, pH 2.3, 1 min) and/or six abrasive attacks (groups A and EA; toothbrush abrasion, 100 strokes, 1 min), while the control specimens (group C) were maintained in artificial saliva. After 10-day treatment, the substance loss and surface changes were determined by surface profilometry and scanning electron microscopy., Results: Human enamel presented higher substance loss when compared to restorative materials. Generally, combined erosion-abrasion (EA) caused the highest substance loss, followed by erosion, abrasion, and storage in artificial saliva. Composite resin presented highest durability under erosive and/or abrasive attacks. Enamel and restorative materials showed degradation in groups E and EA through SEM observation., Conclusions: Toothbrush abrasion has a synergistic effect with erosion on substance loss of human enamel, polyacid-modified composite and glass-ionomer cement. The acid- and abrasive-resistance of human enamel was lower compared to restorative materials.

Objectives: Eroded teeth are more susceptible to toothbrushing wear than sound teeth. We tested the hypothesis that fluoride and abrasivity of dentifrices can interact, modulating the development of erosive-abrasive lesions., Methods: Human enamel and root dentin specimens were submitted to cycles of demineralization, remineralization and toothbrushing using six dentifrices formulated with three different abrasivity levels: low (L), medium (M) and high (H); with (+F) and without (-F) fluoride. Surface loss was quantified by optical profilometry and compared among groups (alpha=0.05)., Results: In dentin, it was ranked: L

Introduction: Although the association between orthodontic treatment and dental health has been studied previously, no studies have hitherto investigated whether the need for, or the receipt of, orthodontic treatment leads to differences in tooth wear in the long term., Methods: In this retrospective, cross-sectional, association study, an index specifically designed for dental study casts was used to examine tooth wear in 307 adults aged 30 to 31 years., Results: The men showed significantly higher levels of tooth wear than did the women. No significant differences in tooth wear in relation to need for or receipt of orthodontic treatment were recorded. Likewise, there appeared to be no significant association between tooth wear and reported intake of acidic drinks and foods., Conclusions: Neither the need for nor the provision of orthodontic treatment contributes to increased tooth wear.

Objective: This study aimed to evaluate the impact of toothpaste slurry abrasivity and toothbrush filament diameter on abrasion of eroded dentin in vitro., Methods: Eroded dentin samples (hydrochloric acid, pH 2.6, 15s) were brushed with 40 strokes in an automatic brushing machine using manual toothbrushes with different filament diameter (0.15, 0.20 or 0.25 mm). The toothbrushes were applied with a control slurry free of abrasive particles (RDA-value 10) or toothpastes slurries with different abrasivity (RDA-values 20, 50 or 100). Each erosive-abrasive cycle was followed by storage of the dentin samples in artificial saliva for 3h. After each 4 cycles, the samples were stored in artificial saliva for 15 h. After 60 cycles, dentin loss was measured by profilometry and statistically analysed by ANOVA and linear regression analysis., Results: Dentin loss increased along with the RDA-value of the toothpaste slurries. The impact of the filament diameter on dentin loss was less evident compared to the RDA-value. However, toothbrushes with smaller filament stiffness caused higher dentin wear in all toothpaste slurry groups (RDA 20, 50 and 100) except for the paste-free control group (RDA 10)., Conclusion: Abrasion of eroded dentin increased along with the RDA-value of the toothpaste slurry and with decreasing filament diameter of the toothbrush.

Objective: In addition to its role as a remineralizing agent in preventing dental caries, calcium product (CPP-ACP) delivered as a mousse (Tooth Mousse, TM) can reduce erosion of enamel and dentine. The aim of this study was to determine whether CPP-ACP could also reduce erosive tooth wear involving toothbrush abrasion., Methods: Flat, polished enamel and dentine specimens (n=72) were subjected to 10 wear regimes, with each regime involving erosion in 0.3% citric acid (pH 3.2) for 10 min followed by toothbrush abrasion in a slurry of fluoride-free toothpaste and artificial saliva (1:3 ratio by weight) under a load of 2N for 200 cycles. The specimens were immersed in artificial saliva for 2h between wear regimes. In the experimental group 1, TM (containing CPP-ACP) was applied at the beginning of each wear episode for 5 min whereas TM- (without CPP-ACP) was applied in the experimental group 2. No mousse was applied in the control group., Results: TM significantly reduced enamel wear (mean+/-S.E., 1.26+/-0.33 microm in the experimental group 1 vs 3.48+/-0.43 microm in the control group) and dentine wear (2.16+/-0.89 microm in the experimental group 1 vs 10.29+/-1.64 microm in the control group), and dentine wear was significantly less in the experimental group 1 than in the experimental group 2 (5.75+/-0.98 microm)., Conclusion: The finding that TM reduced erosive tooth wear involving toothbrush abrasion, probably by remineralizing and lubricating eroded tooth surfaces, may have implications in the management of tooth wear.

Objectives: The purpose of this clinical study was to examine the relationships of v-shaped noncarious cervical lesion (NCCL) formation with occlusal factors., Methods: A total of 159 male self-defense force officials with a mean age of 36.2 years participated in this study. All present teeth were examined for the presence and type of NCCL using the Tooth Wear Index (TWI). The subjects were then interviewed about bruxing and toothbrushing habit. Finally, occlusal force, occlusal contact area and average pressure were measured using a pressure-detecting sheet. Subject-level logistic regression was carried out to assess the associations of factors with presence of v-shaped NCCL teeth. Subjects without v-shaped NCCL were designated as control subjects., Results: Totally, 4518 teeth were examined. Seventy-eight subjects (49.1%) had one or more teeth with typical v-shaped NCCL (259 teeth). The number of teeth with v-shaped NCCL of grade 2 (defect less than 1mm in depth) was 195 (4.3%), and the number of teeth with v-shaped NCCL of grade 3 (defect 1-2mm in depth) was 54 (1.2%). The prevalence of teeth with v-shaped NCCL was significantly higher in the maxilla than in the mandible. Most of the NCCL teeth were premolars. There was no significant difference between teeth with NCCL on the right side and those on the left side. Subject-level logistic regression analysis revealed that age (OR=1.11), toothbrushing pressure (400g, OR=2.43) and occlusal contact area (>23.0mm(2), OR=4.15) were associated with the presence of NCCL teeth., Conclusions: It is concluded that aging, toothbrushing pressure and occlusal contact area are associated with the presence of NCCLs.

Objectives: To determine the enamel abrasivity of three whitening toothpastes and a silica toothpaste and to measure the brushing forces used., Methods: Polished human enamel blocks were indented with a Knoop diamond and attached to dentures of adult volunteers. The blocks were brushed ex vivo, twice per day with either a whitening toothpaste containing Perlite (White System), a commercial whitening toothpaste (A and B) or a silica toothpaste. After four and twelve-weeks, one block per subject was removed and the Knoop indent remeasured. From the changes in the indent length, the amount of enamel wear was calculated., Results: The mean enamel wear (sd) for White System, silica toothpaste, whitening toothpaste A and B after four-weeks was 0.14 (0.15), 0.09 (0.16), 0.14 (0.12) and 0.89 (0.93) and after twelve-weeks was 0.24 (0.21), 0.37 (0.73), 0.36 (0.52) and 1.04 (0.98) microm respectively. After four-weeks, the differences in enamel wear between whitening toothpaste B and all other toothpastes were of statistical significance (p < 0.003), but not after twelve-weeks. The mean ex vivo normal brushing force (sd) was 2.67 (1.33) N., Conclusions: All three whitening toothpastes did not give significantly more enamel wear than a silica toothpaste after twelve-weeks in situ with ex vivo brushing.

Objectives: Design and construct a tooth-brushing simulator incorporating control of brushing variables including brushing force, speed and temperature, thereby facilitating greater understanding of their importance in toothpaste abrasion testing methodologies., Methods: A thermostable orbital shaker was selected as a base unit and 16- and 24-specimen brushing rigs were constructed to fit inside, consisting of: a square bath partitioned horizontally to provide brushing channels, specimen holders for 25 mm diameter mounted specimens to fit the brushing channels and individually weighted brushing arms, able to support four toothbrush holders suspended over the brushing channels. Brush head holders consisted of individually weighted blocks of Delrin, or PTFE onto which toothbrush heads were fixed. Investigating effects of key design criteria involved measuring abrasion depths of polished human enamel and dentine., Results: The brushing simulator demonstrated good reproducibility of abrasion on enamel and dentine across consecutive brushing procedures. Varying brushing parameters had a significant impact on wear results: increased brushing force demonstrated a trend towards increased wear, with increased reproducibility for greater abrasion levels, highlighting the importance of achieving sufficient wear to optimise accuracy; increasing brushing temperature demonstrated increased enamel abrasion for silica and calcium carbonate systems, which may be related to slurry viscosities and particle suspension; varying brushing speed showed a small effect on abrasion of enamel at lower brushing speed, which may indicate the importance of maintenance of the abrasive in suspension., Conclusions: Adjusting key brushing variables significantly affected wear behaviour. The brushing simulator design provides a valuable model system for in vitro assessment of toothpaste abrasivity and the influence of variables in a controlled manner. Control of these variables will allow more reproducible study of in vitro tooth wear processes.

Objectives: To investigate the stain removal ability, abrasivity towards enamel and dentine, and fluoride efficacy of a new silica based blue covarine whitening toothpaste in vitro., Methods: Stain removal was assessed by brushing artificially stained bovine specimens with slurries of either the new toothpaste or one of two whitening products or a non-whitening silica product. Toothpaste abrasivity was assessed by brushing enamel/dentine specimens with slurries of either the new toothpaste, a whitening toothpaste or a non-whitening toothpaste and measuring the wear via a combination of changes in geometry of Knoop indents and surface profilometry. Fluoride efficacy was assessed using remineralisation, demineralisation and fluoride-uptake methods., Results: The in vitro cleaning study showed that the silica based blue covarine whitening toothpaste removed significantly (p < 0.05) more stain than the non-whitening toothpaste and was as effective as the two marketed silica based whitening toothpastes. This enhanced tooth whitening benefit did not give rise to a concomitant statistically significant increase in the level of wear to enamel and dentine compared to the non-whitening silica based toothpaste. The fluoride efficacy was superior to a non-fluoridated control and was as effective as a clinically tested formulation containing the same fluoride source., Conclusions: The studies show that the new whitening toothpaste is effective in extrinsic stain removal, does not have an undue degree of abrasivity to enamel or dentine compared to other relevant commercially available products, and is an efficacious source of fluoride.

The scope of gerodontology and more specifically that of restorative dentistry (which in the UK includes the disciplines of endodontics, periodontics, prosthodontics and operative dentistry) within gerodontology, is expanding. This is true for several reasons. Firstly, the population, in both the UK and most of the western world is generally living longer. Secondly, more elderly patients are retaining their natural teeth longer into old age--thereby necessitating ongoing restorative dentistry input for their maintenance. In addition, many patients' expectations are increasing with regards to restorative dentistry. Natural teeth that were erstwhile considered as automatic candidates for extraction may now be regarded differently, especially if they are considered a 'strategic' tooth within the arch. The aim of this paper is to give a perspective as to how some of the more common restorative dentistry issues that beset the elderly population are addressed in the UK. This paper will focus on operative dentistry and prosthodontic aspects of restorative dentistry for elderly patients.

Aim of the present study was to compare toothbrushing abrasion of eroded human and bovine enamel utilizing a toothpaste slurry. The surfaces of each 36 teeth from cattle and calves and from each 36 human wisdom teeth and deciduous teeth were polished. Each 12 specimens from the respective tooth type were used for assessing toothbrushing abrasion only (A), erosion only (E) and the combination of erosion and toothbrushing abrasion (EA). The EA samples were subjected to 20 cycles comprising a demineralization/remineralization procedure directly followed by toothbrushing abrasion (100 strokes, 300 g load, toothpaste slurry: 3 ml artificial saliva mixed with 1g dentifrice). Demineralization in form of erosion was performed with 1% citric acid (1 min), remineralization with artificial saliva (15 min). Between the cycles, the samples were stored in artificial saliva. Wear of the treated surfaces with reference to untreated areas was determined profilometrically. The samples subjected to abrasion only (A) did not show a significantly different wear between the different kinds of teeth. The comparisons of substance loss between teeth of different species revealed that hard tissue loss of the human deciduous teeth was significantly lower as compared to calves' teeth after both erosion and erosion-abrasion. Also, both erosion only and erosion-abrasion caused higher enamel loss in cattle's teeth than in human wisdom teeth. It is concluded that human eroded enamel offers better resistance against brushing than bovine enamel.

Objectives: To determine the prevalence of tooth surface loss (TSL) in a sample of subjects attending a university dental clinic in Trinidad and to investigate the relationship to tooth brushing, medical history, parafunction and dietary habits., Design: Tooth surface loss was measured clinically by the index used in the 1998 UK, Adult Dental Health Survey., Setting: Trinidad, West Indies., Participants: Convenience sample of adult subjects attending The University of the West Indies Dental School Polyclinic, Mount Hope., Methods: A questionnaire was administered and tooth surface loss measured clinically., Main Outcome Measures: mild, moderate and severe tooth surface loss., Results: 155 subjects were examined (mean age 40.6 years) of whom 72% had some degree of TSL with the majority (52%), exhibiting mild, 16% with moderate and 4% with severe TSL. There were associations found between TSL and age (OR=3.14), reflux (OR=1.37), parafunction (OR=1.06), weekly consumption of citrus fruits (OR=1.31) and soft drinks (OR=1.78), daily consumption of alcohol (OR=1.40) and a vegetarian diet (OR=2.79)., Conclusions: Tooth surface loss in this Trinidadian population group appears to be common. Data supports an association between TSL and age, reflux parafunction and certain dietary patterns.

Objectives: Enamel erosion results in the formation of a softened layer that is susceptible to disruption by mechanical factors such as brushing abrasion, tongue friction and attrition. The aim of this study was to investigate the individual contribution of those mechanical insults to the enamel loss caused by dental erosion., Methods: Forty two bovine enamel samples were randomly divided into seven groups (n=6 per group) that were submitted to 3cycles of one of the following regimes: erosion and remineralization (er/remin); toothbrush abrasion and remineralization (abr/remin); erosion, toothbrush abrasion and remineralization (er/abr/remin); attrition and remineralization (at/remin); erosion, attrition and remineralization (er/at/remin); simulated tongue friction and remineralization (tg/remin); erosion, simulated tongue friction and remineralization (er/tg/remin). Erosion took place in a demineralization solution (50mM citric acid, pH 3) for 10min under agitation. Brushing abrasion, tongue friction and attrition were simulated for 1min using a home-made wear device. Remineralization was carried out in artificial saliva for 2h. Enamel loss was quantified using optical profilometry., Results: One-way ANOVA indicated a significant difference between the amounts of enamel lost due to the different wear regimes (p

Objective: Evaluation of long-standing sleep bruxism (SB) patients., Study Design: Descriptive study., Results: One hundred subjects with SB (80 women and 20 men, mean age: 36.1+/-11.3 years) were evaluated according to the RDC/TMD and a pain questionnaire (EDOF-HC). The patients were divided into 2 groups: Group A-without (30.0%) and Group B-with orofacial pain (70.0%). AM stiffness: 36.4% in Group A and 88.6% in Group B; mean pain duration: 6.92 years; mean intensity of pain: 4.33 (VAS); quality of pain: tightness/pressure (84.3%); 95.7% of Group B had myofascial pain. Depression and somatization levels were different between the groups (p = 0.001). Higher frequency of depression was found with body pain or presence of comorbidities., Conclusion: The data presented in this study showed statistical differences between long-standing bruxism without and with chronic facial pain; the two questionnaires allowed interaction between the chief complaint and the clinical findings; depression levels increased with pain in several regions of the body.

Introduction: Enamel demineralization is an undesirable side effect of orthodontic treatment with fixed appliances. The purpose of this in-vitro study was to evaluate the efficacy of applying a light-cured filled sealant onto the buccal tooth surfaces to prevent demineralization., Methods: Fifty extracted human third molars were allocated to 1 of 5 groups: (1) enamel surface untreated (control); (2) surface etched; (3) fluoride varnish applied; (4) enamel etched and coated with a light-cured, unfilled sealant (control sealant); and (5) enamel etched and coated with a light-cured, filled sealant (Pro Seal, Reliance Orthodontic Products, Itasca, Ill). The enamel surface of each specimen was brushed for 15,000 strokes with nonfluoride toothpaste slurry with a piston-action brushing machine under a standardized load. All samples were then cycled for 14 days through a daily procedure of demineralization for 6 hours and remineralization for 17 hours. Then the teeth were sectioned and evaluated quantitatively by cross-sectional microhardness testing., Results: Demineralization in the Pro Seal group was significantly less (P < .05) than in the other groups. Teeth treated with fluoride varnish exhibited 30% less demineralization than the control teeth, the enamel-etched teeth, and the teeth treated with a light-cured, unfilled sealant (P < .05)., Conclusions: Pro Seal can be considered for use as a preventive method to reduce enamel demineralization adjacent to orthodontic attachments, particularly in patients who exhibit poor compliance with oral hygiene and home fluoride use.

Objectives: To determine the enamel and dentine wear of two whitening toothpastes using an in situ model with ex vivo brushing., Methods: Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4mm) were placed in the upper buccal aspects of full or partial dentures of a group of 25 subjects. Subjects brushed the specimens ex vivo with either a calcium carbonate/perlite or silica containing whitening toothpaste under exaggerated conditions as compared to normal for 30 s, twice per day. Specimens were removed after 4, 8 and 12 weeks and the wear to the enamel and dentine was determined. Enamel wear was determined by change in Knoop indent length and dentine wear was determined from the enamel-dentine step height, measured using optical profilometry., Results: The mean wear after 12 weeks was for enamel 0.27 and 0.19 microns, and for dentine 34.3 and 61.1 microns, for the calcium carbonate/perlite and silica toothpastes respectively. There were no significant differences between products after 12 weeks. The rate of wear was found to decrease throughout the duration of the study., Conclusion: There were no significant differences between the two whitening toothpastes in terms of enamel and dentine wear after 12 weeks brushing.

Historically, the dental literature has revealed various causes of tooth wear, yet it has failed to provide a conclusive method of differentiation and diagnosis of the condition. The categories of tooth wear encountered most commonly in dental practice are abrasion and erosion. The major causes of wear from abrasion are bruxism and toothpaste abuse, and the major causes of wear from erosion are regurgitation, coke-swishing and fruit-mulling. Through in-depth clinical study of these causes, this paper provides a diagnostic system that will enable dental professionals to determine and differentiate the exact aetiology of the worn dentition simply by the recognition of the pathognomonic wear patterns on diagnostic casts, which are based upon the position and quantity of the non-carious loss of tooth structure.

Objectives: To determine the rates of enamel and dentine wear in situ during tooth brushing with a range of five toothpastes of differing RDA and REA values., Methods: Enamel/dentine inserts were placed in the buccal aspects of full upper dentures of human volunteers. Enamel wear was determined by change in Knoop indent length and dentine wear was determined from the enamel-dentine step height, measured using optical profilometry., Results: Significant differences between the test products were found for both enamel and dentine (p < 0.05). However for the conventional toothpastes the rate of wear was similar and differences between the products were not generally statistically significant for either enamel or dentine, despite the fact that their RDA values differed by more than a factor of two. The rate of wear was found to decrease throughout the duration of the study., Conclusions: The study demonstrated that the methodology used is capable of assessing enamel and dentine wear in situ within a relatively short period of time. The data suggest that whilst in vitro tests have value in understanding differences in abrasivity between products, they cannot be used to predict in vivo effects.

Objectives: To investigate the in vitro enamel and dentine wear by toothpastes with a range of Relative Dentine Abrasivity (RDA) and Relative Enamel Abrasivity (REA) values., Methods: Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4 mm) were polished and the enamel indented with four Knoop indents. The step across the enamel-dentine junction was measured by interference microscopy. Specimens were brushed in vitro with toothpastes with a range of RDA/REA values using a flat trim toothbrush mounted in a Wira brushing machine for 360 s and a load of 375 g. After brushing the Knoop indent length and the enamel-dentine step were remeasured and the amount of wear to the enamel and dentine was calculated., Results: The mean enamel wear ranged from 0.05 to 0.40 microns, with the highest wear for the highest REA product. The mean dentine wear for all toothpaste products tested was positively correlated with RDA value (R2 = 0.897). The correlation was further improved if median wear values were used (R2 = 0.930)., Conclusions: This study has demonstrated a rapid technique for the simultaneous investigation of the abrasive wear of toothpaste on enamel and dentine. There was a good correlation between median dentine wear and RDA values.

Objective: The aim of this study was to investigate safety concerns with bleaching procedures by studying the effects of a high concentration hydrogen peroxide (HP) in-surgery bleaching product on enamel and dentine., Method: Flat enamel and dentine samples embedded in epoxy resin were prepared from human third molar teeth. Erosion of enamel: groups of enamel samples were treated with 35% HP then citric acid (CA) or brushing with toothpaste or CA alone and water alone. Enamel Loss was measured using a profilometer. Abrasion/erosion of dentine: groups of dentine specimens were treated as follows: Group 1--brushed with water for 30 min. Group 2--brushed with 35% HP for 30 min. Group 3--power bleached for 30 min and then Group 4--brushed with toothpaste for 1 minute. Group 5--water soaked for 30 min followed by brushing with toothpaste for 1 min. Group 6--orange juice soaked for 30 min followed by brushing with toothpaste for 1 min. Treatment effects were measured using a profilometer. Hardness tests: enamel and dentine specimens were hardness tested using a Wallace indenter prior to and post bleaching. Scanning Electron Microscopy: enamel and dentine specimens were taped and the exposed tissue treated with 35% HP and then studied under scanning electronmicroscopy (SEM)., Results: Enamel erosion: bleaching enamel samples had no measurable effect on enamel. Pre-bleaching had no significant effect on subsequent CA erosion or brushing. Abrasion/erosion of dentine: no significant differences were found between treatments 1-5 with little change from baseline detected. Orange juice (Group 6) produced considerable and significantly more erosion than other treatments. Hardness tests: there were no significant changes in hardness values for enamel and dentine. SEM: there was no evidence of any topographical changes to either enamel or dentine., Conclusion: Using one of the highest concentrations of HP for tooth bleaching procedures and maximum likely peroxide exposure, there was no evidence of deleterious effects on enamel or dentine. It must be assumed that studies which reported adverse effects on enamel and or dentine of bleaches reflect not the bleach itself but the pH of the formulation used.

Overview: The authors propose updated and revised nomenclature, definitions and classification for tooth surface lesions. Their objective is standardization, clarity and clinical utility for the dental practitioner. The article presents a schema of the pathodynamic mechanisms in the formation of tooth surface lesions--three basic physical and chemical mechanisms, their interactions and their dental manifestations., Conclusions and Clinical Implications: The use of precise definitions will assist the practitioner in determining the etiology of various tooth surface lesions. Understanding the pathodynamic mechanisms and their many possible interactions, as set forth in the schema, will enable the practitioner to make an accurate differential diagnosis and to provide effective prevention and treatment. It also will assist dentists in communicating more effectively with their colleagues as well as with their patients. In addition, the schema helps identify areas in which future research is indicated.

Aim: To determine whether there is a correlation between dental abrasions and the frequency and technique of tooth brushing, as well as to examine the prevalence of dental abrasion according to age and gender., Materials and Methods: This study was carried out on 428 adults (242 female, 186 male) 20 years of age and older, who attended the Department of Operative Dentistry, Department of Oral Diagnosis and Oral Radiology Faculty of Dentistry, Atatürk University., Results: The study revealed a statistically significant relationship between abrasive lesions and age groups as well as between abrasive lesions and gender. A statistically significant difference was determined between abrasions and tooth brushing frequency, while there was no statistically significant relation between abrasions and tooth brushing technique (p>0.05)., Conclusion: The prevalence of tooth brushing abrasions increases with age, and lesions are seen more frequently in males than in females. Also, tooth brushing technique is not important to the presence of abrasions, but increased tooth brushing frequency results in an increase in the number of abrasions.