Search

This work represents an innovative approach to the synthesis and characterization of a chitosan-based biocomposite for fluoride adsorption. The work involved the development of a biocomposite based on modified chicken bone waste-derived hydroxyapatite and TiO 2 . The composite was characterized using scanning electron microscopy with Energy Dispersive X-ray analysis (SEM-EDX), X-ray diffraction (XRD), Fourier-transform infrared analysis (FTIR), thermal-gravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The optimum parameters for fluoride removal were determined, and the kinetic data was better fitted to the pseudo-first-order model. The Liu equations provided a better description of the experimental adsorption isotherm data. The adsorption mechanism and the interaction of the composite with fluoride were better understood using Density Functional Theory (DFT) calculations and Non-Covalent Interactions (NCI) analyses, paving the way for more effective and efficient defluoridation methods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, the synthesis and experimental theoretical evaluation of a new chitosan/alginate/hydrozyapatite nanocomposite doped with Mn2 and Fe2O3 for Cr removal was reported. The physicochemical properties of the obtained materials were analyzed using the following methods: SEM-EDX, XRD, FTIR, XPS, pH drift measurements, and thermal analysis. The adsorption properties were estimated based on equilibrium and adsorption kinetics measurements. The Langmuir, Freundlich and Temkin isotherms were applied to analyze the equilibrium data. The thermodynamic analysis of adsorption isotherms was performed. A number of equations and kinetic models were used to describe the adsorption rate data, including pseudo-first (PFOE) and pseudo-second (PSOE) order kinetic equations. The obtained test results show that the synthesized biomaterial, compared to pure chitosan, is characterized by greater resistance to high temperatures. Moreover, this biomaterial had excellent adsorption properties. For the adsorption of Cr (VI), the equilibrium state was reached after 120 min, and the sorption capacity was 455.9 mg/g. In addition, DFT calculations and NCI analyses were performed to get more light on the adsorption mechanism of Cr (VI) on the prepared biocomposite., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Controlling cellular adhesion is a critical step in the development of biomaterials, and in cell- based biosensing assays. Usually, the adhesivity of cells is tuned by an appropriate biocompatible layer. Here, synthetic poly(diallyldimethylammonium chloride) (PDADMAC), natural chitosan, and heparin (existing in an extracellular matrix) were selected to assembly PDADMAC/heparin and chitosan/heparin films. The physicochemical properties of macroion multilayers were determined by streaming potential measurements (SPM), quartz crystal microbalance (QCM-D), and optical waveguide lightmode spectroscopy (OWLS). The topography of the wet films was imaged using atomic force microscopy (AFM). The adhesion of preosteoblastic cell line MC3T3-E1 on those well-characterized polysaccharide-based multilayers was evaluated using a resonant waveguide grating (RWG) based optical biosensor and digital holographic microscopy. The latter method was engaged to investigate long-term cellular behavior on the fabricated multilayers. (PDADMAC/heparin) films were proved to be the most effective in inducing cellular adhesion. The cell attachment to chitosan/heparin-based multilayers was negligible. It was found that efficient adhesion of the cells occurs onto homogeneous and rigid multilayers (PDADMAC/heparin), whereas the macroion films forming "sponge-like" structures (chitosan/heparin) are less effective, and could be employed when reduced adhesion is needed. Polysaccharide-based multilayers can be considered versatile systems for medical applications. One can postulate that the presented results are relevant not only for modeling studies but also for applied research., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Aneta Michna reports financial support was provided by National Science Centre Poland., (Copyright © 2023. Published by Elsevier B.V.)

The influence of the geometric modification (GM) of fumed nanoscale silica A300 (NS) on the adsorption capacity of human serum albumin (HSA) as well as the physicochemical and textural properties of the protein/nanosilica system was analyzed. An effective medical enterosorbent based on fumed nanosilica was designed and produced in the Chuiko Institute of Surface Chemistry, National Academy of Sciences of Ukraine. To design an effective nanomaterial for biomedical applications as a wound-healing material, the adsorption, physicochemical and surface properties of the initial nanosilica (NS), nanosilica after geometric modification (GM-nanosilica), and HSA/nanosilica biocomposites were characterized. The differences in sorption capacities, acid-base, textural, and surface properties of the obtained materials were monitored using the diffuse UV-vis reflectance spectroscopy, the potentiometric titration of suspension, the nitrogen adsorption/desorption isotherms, the scanning electron microscopy with the energy dispersive X-ray microanalysis and the digital optical microscope. For a deeper understanding of the nature of immobilized HSA molecules on the nanosilica and GM-nanosilica, the surface functional groups were characterized by the FTIR spectroscopy. It was found that the adsorption properties, physicochemical and textural characteristics of fumed nanoscale silica depend on the mechanical treatment time (t MT ) and bulk density (d b ). In fact, as the t MT increases, the d b of initial fumed nanosilica increases, and the protein adsorption capacity decreases, however, it remains at an acceptable level: 0.075 g/g, 0.056 g/g, 0.032 g/g for GM-nanosilica after 1, 4, and 7 h of mechanical treatment, respectively. HSA adsorption significantly changes the surface morphology, acid-base character, and structure of both unmodified and modified nanosilica., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

In the brain, numbers are thought to be represented in a spatially organised fashion on what is known as the Mental Number Line (MNL). The SNARC (Spatial-Numerical Association of Response Codes) effect refers to the faster responses to digits when the reaction side is congruent with the digit position on the MNL (e.g. a left-handed response to a small magnitude) and the slowing down of responses (inhibition) in the case of incongruity. We examined the electrophysiological correlates of conflict, which are linked to that of inhibition, to shed light on the relationship between the SNARC effect and executive attention. Event-related potentials (ERPs) were recorded from twenty-nine participants during a parity-judgment task. The participants responded more quickly on congruent than on incongruent trials. The congruency effect was reflected in early sensory (N1, N2) components above parieto-occipital and frontal regions, as well as in the later P3 component above centro-parietal areas. Moreover, both the N1 amplitude and N2 latency were greater with high than low magnitude digit targets. P3 amplitude modulation implies that the SNARC effect is the result of first evoking the parallel processing of digit magnitude categorisation (in the occipital and central areas) and numeric conflict detection (in the parieto-occipital and frontal areas) and secondly conflict monitoring and resolution localised in the centro-parietal and frontal sites. These results also suggest that the left hemisphere specialises in conflict processing of high magnitude digit targets, while the right hemisphere of low digit magnitudes., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Recent developments in the electrokinetic determination of particle, polyelectrolyte and protein deposition at solid/electrolyte interfaces, are reviewed. In the first section basic theoretical results are discussed enabling a quantitative interpretation of the streaming current/potential and microelectrophoretic measurements. Experimental results are presented, pertinent to electrokinetic characteristics of simple (homogeneous) surfaces such as mica, silica and various polymeric surfaces used in protein studies. The influence of the ionic strength, background electrolyte composition and pH is discussed, and the effective (electrokientic) charge of these interfaces is evaluated. In the next section, experimental data obtained by streaming potential measurements for colloid particle mono- and bilayers are presented and interpreted successfully in terms of available theoretical approaches. These results, obtained for model systems of monodisperse colloid particles are used as reference data for discussion of more complicated experiments performed for polyelectrolyte and protein covered surfaces. Results are discussed, obtained for cationic polyelectrolytes (PEI, PAH) and fibrinogen adsorbing on mica, interpreted quantitatively in terms of the theoretical approach postulating a heterogeneous 3D charge distribution. The Gouy-Chapman model, based on the continuous charge distribution proved inadequate. Interesting experimental data are also discussed, obtained by electrophoretic methods in the case of protein adsorption on colloid latex particles. In the last section, supplementary results on particle deposition on heterogeneous surfaces produced by controlled protein adsorption are discussed. Quantitative relationships between the amount of adsorbed protein, zeta potential of the interface and the particle coverage are specified. Possibility of evaluating the heterogeneity of protein charge distribution is pointed out. The anomalous deposition of colloid particles on protein molecules bearing the same sign of zeta potential, which contradicts classical DLVO theory, is interpreted in terms of the fluctuation theory. It is concluded that theoretical and experimental results obtained for model colloid systems and flat interfaces can be effectively used for interpretation of protein adsorption phenomena, studied by electrophoresis. In this way the universality of electrokinetic phenomena is underlined., (Copyright © 2011 Elsevier B.V. All rights reserved.)