Search

Cellulose has advantages of easy availability, low price, renewability and biodegradability, making it a very promising substitute for fossil-based materials. A safe composite cellulose membrane for quasi-solid-state lithium ion batteries has been developed by coating cellulose separators with poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and lithium aluminum titanium phosphate (LATP). This membrane exhibits excellent electrochemical performance, with an ionic conductivity as high as 2.1 mS cm−1, and a lithium-ion transference number of 0.57. The membrane shows good electrolyte wetting properties, with porosity and liquid electrolyte uptake of 47.2 % and 401.7 %, respectively. It has good thermal stability and can maintain its dimensional stability even at 200 ℃. The capacity retention of the quasi-solid-state LiFePO4/Li battery assembled with this membrane after 200 cycles at 0.2 C is about 86.7 %. The quasi-solid-state battery has good thermal stability and is not prone to thermal runaway.

The poly (ethylene oxide) (PEO) solid polymer electrolytes suffer from narrow electrochemical stability window and cannot match high voltage lithium cobalt oxide (LCO) cathode. Herein, an ultrathin Al2O3 nanolayer was uniformly deposited on the surface of LCO via powder atomic layer deposition (PALD) to realize poly (ethylene oxide) polymer electrolyte cycling stability. The PEO solid polymer electrolyte contains 20 % (w/w) lithium difluoro(oxalate)borate (LiDFOB) and 7.5 % (w/w) lithium titanium aluminum phosphate (LATP) with cellulose nonwoven as a support substrate. The electrolyte exhibitsionic conductivity of 1.2×10−4 S cm−1, an electrochemical stability window of 4.5 V (vs. Li+/Li) and lithium-ion transference number of 0.38. Al2O3@LCO/PEO-LiDFOB20%-LATP7.5%/Li cell at high cut-off 4.5 V delivered better initial discharge specific capacity of 178.5 mAh g−1 and achieved a capacity retention ratio of 81.6 % after 200 cycles under 0.1 C at 50 °C. Further analysis showed that Al2O3 layer served as stable a protective layer to suppress the generation of strong oxidative Co4+ and O– species and separate from the PEO solid polymer electrolyte, inhibiting the side reactions at the cathode-side interface. Therefore, architecting precise and ultrathin protective nanolayer interface on high voltage LCO cathode via PALD is conducive to cycling performance of solid polymer electrolyte.

In this study, low-loss FeSiAl soft magnetic composites (SMCs) were prepared through atomic layer deposition coating and high temperature annealing for FeSiAl ferromagnetic powder, combined with subsequent bonding, pressing and sintering processes. Microstructural analysis indicated that a thin, dense, and continuous Al2O3 coatings deposited onto the FeSiAl surfaces could withstand an annealing temperature of up to 1000 °C, and high temperature annealing for powder has been proved to improve the magnetic properties of SMCs effectively. The hysteresis loss of FeSiAl SMCs was significantly improved because the integrity of the coating layer facilitated grain growth and stress relaxation at high temperatures. Meanwhile, the coating layers with high resistivity confined eddy currents inside the powders and reduced eddy current loss. What's more, the permeability was also improved due to the relaxation of residual stresses and the reduction of structural defects. Compared with that of raw FeSiAl SMC, the permeability of the SMC prepared via powders annealing at 1000 °C increased from 69.27 to 73.48, and its core loss decreased from 261.9 to 145.7 mW/cm³ (100 mT/50 kHz). However, for the SMC annealed at 1100 °C, the eddy current losses increased sharply because of the partially decomposed Al2O3 coating. Notably, the magnetic performance (principally core loss) of the FeSiAl SMCs could be modulated by varying the annealing temperature. This study provides a novel strategy for reducing the core loss of FeSiAl SMCs through powder annealing.

Objectives: Alpha-ketoglutarate (αKG) is an essential metabolite that plays a crucial role in skeletal homeostasis. Here we aim to investigate the effect of αKG on alveolar socket healing and reveal the underlying mechanism in the view of macrophage polarization. Methods: In a murine model pretreated with or without αKG, mandibular first molars were extracted. Mandibular tissues were harvested for microCT and histological analyses. Immunofluorescence was used to evaluate macrophage polarization during healing process. Macrophages with αKG/vehicle supplementation in vitro were proceeded to quantitative real-time PCR and flow cytometry to further elucidate the mechanism. Results: MicroCT and histological analyses showed accelerated healing and enhanced bone regeneration of extraction sockets in experimental group. αKG increased new bone volume in alveolar sockets and promoted the activity of both osteoblastogenesis and osteoclastogenesis. αKG administration reduced M1 pro-inflammatory macrophages in an early phase and promoted anti-inflammatory M2 macrophage polarization in a later phase. Consistently, the expressions of M2 marker genes were augmented in αKG group, while M1 marker genes were downregulated. Flow cytometry revealed the increased ratio of M2/M1 macrophages in cells treated with αKG. Conclusions: αKG accelerates the healing process of extraction sockets via orchestrating macrophage activation, with promising therapeutic potential in oral clinics.

This study sought to determine the effects of wine-producing regions and aging periods on the astringency and chemistry of condensed tannins of Cabernet Sauvignon dry red wines. A wine quality study was performed with 5 vintages of 32 Cabernet Sauvignon wines produced in four Chinese wine-producing regions, Hebei (H), Xinjiang (X), Inner Mongolia (NM), and Ningxia (NX). Condensed tannin profiles were assessed by high-performance liquid chromatography coupled with a diode array detector (HPLC-DAD). The (–)-epicatechin as the terminal subunit (tEC) is the major differential component between regions. Correlation analysis revealed that condensed tannin concentration and composition significantly affected the sensory evaluation of astringency. Condensed tannin concentrations were significantly and negatively correlated with wine aging periods. However, no significant correlation was found between aging periods and condensed tannin subunits (as mole%) composition. The current findings enhance the understanding of condensed tannins' chemical and astringency characteristics in Cabernet Sauvignon wines.

Summary: Long noncoding RNAs (lncRNAs) participate in host antiviral responses; however, how viruses exploit host lncRNAs for immune evasion remains largely unexplored. Functional screening of differentially expressed lncRNA profile in patients infected with influenza A virus (IAV) revealed that lncNSPL (Gene Symbol: LOC105370355) was highly expressed in monocytes. Deregulated lncNSPL expression in infected monocytes significantly increased type I interferon (IFN-I) production and inhibited IAV replication. Moreover, lncNSPL overexpression in mice increased the susceptibility to IAV infection and impaired IFN-I production. LncNSPL directly bound to retinoic acid-inducible gene I (RIG-I) and blocked the interaction between RIG-I and E3 ligase tripartite interaction motif 25 (TRIM25), reducing TRIM25-mediated lysine 63 (K63)-linked RIG-I ubiquitination and limiting the downstream production of antiviral mediators during the late stage of IAV infection. Our findings provide mechanistic insights into the means by which lncNSPL promotes IAV replication and immune escape via restricting the TRIM25-mediated RIG-I K63-linked ubiquitination. Thus, lncNSPL may represent a promising pharmaceutical target for anti-IAV therapy.

The development of environmentally friendly and durable gel materials based on biomass is becoming critical today. In this paper, a kind of self-healing ion gel based on acylhydrazone bonds was firstly prepared by eco-friendly polysaccharide materials. The gel can achieve rapid self-healing within minutes after cutting and has properties such as free-shapeable and adhesive properties, and it can also be used as a solid electrolyte in supercapacitors. On this basis, we introduced Fe3O4 to the gel precursor and produced a kind of ion gel (OSA-PAM-Fe3O4-CNCs ion gel) which can realize self-healing instantly by combining acylhydrazone bond with metal coordination bond for the first time. Moreover, the strength of ion gel is more than 10 times than before. With the good Mechanical and electrochemical properties, the self-healing ion gels is expected to be used in the field of wearable flexible sensing.