Search

Detection of antibodies to upper respiratory pathogens is critical to surveillance, assessment of the immune status of individuals, vaccine development, and basic biology. The urgent need for antibody detection tools has proven particularly acute in the COVID-19 era. We report a multiplex label-free antigen microarray on the Arrayed Imaging Reflectometry (AIR) platform for detection of antibodies to SARS-CoV-2, SARS-CoV-1, MERS, three circulating coronavirus strains (HKU1, 229E, OC43) and three strains of influenza. We find that the array is readily able to distinguish uninfected from convalescent COVID-19 subjects, and provides quantitative information about total Ig, as well as IgG- and IgM-specific responses., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Enhancing the efficiency of antibody protein immobilized on a silicon nanowire-based chip for their antigens detection is reported. An external electric field (EEF) is applied to direct the orientation of antibodies during their immobilization on a chip. Atomic force microscopy (AFM) is used to measure the binding forces between immobilized antibody and targeting antigen under the influence of EEF at different angles. The maximum binding force under a specific angle (optimal angle; oa) of EEF ( max EEF oa ) implies the optimal orientation of the antibodies on the chip. In this report, two different cancer carcinoembryonic antigen (CEA)-related cell adhesion molecules 5 (CEACAM5) & 1 (CEACAM1) were used for the examples of disease antigen detection. max EEF oa of anti-CEACAM5 or anti-CEACAM1 immobilized on a general chip was firstly determined. Spectroscopy of AFM revealed that both binding forces were the largest ones with their antigens when max EEF oa was applied as compared with no or other angles of EEF. These antibody proteins accompanied with the application of EEF were secondly immobilized on silicon-nanowires (n = 1000) and the field effects were measured (∆I) as their target antigens were approached. Results showed that ∆I was the largest ones when max EEF oa s (225°/270° and 135°/180° for anti-CEACAM5 and anti-CEACAM1, respectively) were applied as compared with other angles of EEF. These observations imply that the silicon nanowires together with the application of max EEF oa as detection tools could be applied for the cancer diagnostics in the future., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In precision medicine, clinical decisions and pharmaceutical evaluations tends to be made upon parallel analysis of multiple protein biomarkers. Currently, the growing needs of high-throughput multiplex immunoassay is partially satisfied by spectrally encoded bead flow suspension arrays and other platforms, yet there is still room for progress in terms of encoding capacity, decoding accuracy, ease-of-manufacture/operation, and cost-effectiveness, for which graphical suspension arrays could make substantial contributions. Here we described a suspension array system made up of graphically encoded silica particles, an automated microplate imager and an in-house data processing program. The micro-fabricated, highly uniform planar particles provide a code space of 128-plex with further extendibility. The derived multiplex immunoassay reaches sub-picogram per milliliter sensitivity level (lowest LoD = 80 fg/ml) with wide dynamic range, as well as high precision and accuracy. The potential of clinical diagnostics was demonstrated by parallel measurement of three serum biomarkers for type 1 diabetes patients. Importantly, use of standard microplates as assay vessel extends its power to high-throughput applications, such as disease screening or drug discovery., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Ideal monitoring devices should enjoy a combination of characteristics, e.g. high sensitivity, multiplexing, portability, short time-to-result (TTR). Typically, no device meets all of these demands since some of them are contradictory, to some extent. Herein, we present a miniaturized platform based on fluorescent detection, which is sensitive, readily allows multiplexing, and allows real-time monitoring of the signal, thus allowing extraction of kinetic information as well as drastic reduction of TTR. This is achieved via miniaturization of active spots, integration with microfluidics, and algorithmic approaches. We validate its performance by comparing with evanescent field excitation, which obtains similar results, however without the addition of the necessary complex hardware., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Nonspecific binding or adsorption of biomolecules presents as a major obstacle to higher sensitivity, specificity and reproducibility in microarray technology. We report herein a method to fabricate antifouling microarray via photopolymerization of biomimetic betaine compounds. In brief, carboxybetaine methacrylate was polymerized as arrays for protein sensing, while sulfobetaine methacrylate was polymerized as background. With the abundant carboxyl groups on array surfaces and zwitterionic polymers on the entire surfaces, this microarray allows biomolecular immobilization and recognition with low nonspecific interactions due to its antifouling property. Therefore, low concentration of target molecules can be captured and detected by this microarray. It was proved that a concentration of 10ngmL -1 bovine serum albumin in the sample matrix of bovine serum can be detected by the microarray derivatized with anti-bovine serum albumin. Moreover, with proper hydrophilic-hydrophobic designs, this approach can be applied to fabricate surface-tension droplet arrays, which allows surface-directed cell adhesion and growth. These light controllable approaches constitute a clear improvement in the design of antifouling interfaces, which may lead to greater flexibility in the development of interfacial architectures and wider application in blood contact microdevices., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this study, a sensitive biosensing interface for protein was reported based on nonconductive insoluble precipitates (IPs) by the biocatalysis of manganese(III) meso-tetrakis (4-N-methylpyridiniumyl)-porphyrin (MnTMPyP), which was intercalated into formed double-strand DNA (dsDNA) scaffold triggered by hybridization chain reaction (HCR). In the proposed impedimetric aptasensor, carcinoembryonic antigen (CEA) and its aptamer were used as testing model. PtPd nanowires (PtPdNWs) with large surface area and superior conductivity were employed as nanocarriers to greatly immobilize biomolecules (e.g. CEA aptamers). Then, two DNA hairpins H1 and H2 were introduced to trigger HCR with the assistance of DNA initiator, resulting in the formation of a long dsDNA scaffold. Meanwhile, mimicking enzyme MnTMPyP molecules were embedded into the resultant dsDNA, in situ generating the complex MnTMPyP-dsDNA with peroxidase-like activity. Under the biocatalysis of MnTMPyP-dsDNA, 3,3-diaminobenzidine (DAB) was oxidized to form nonconductive IPs. As a result, the electron transfer between electrode interface and redox probe was vastly hindered, leading to the significant amplification of electrochemical impedimetric signal. So, greatly improved analytical performances of the proposed aptasensor were achieved with a detection limit as low as 0.030pgmL(-1). And the successful assay of CEA in human serum samples enabled the developed biosensing platform to have promising potential in bioanalysis., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this work, we report a facile one-pot strategy for protein detection based on sterically and allosterically tunable hybridization chain reaction (HCR). In our strategy, DNA hairpins H1 and H2 are dual-labeled with pyrene moieties through a six-carbon-atom spacer at each end; and a single-stranded DNA primer is designed to contain two small molecules near each end. In the absence of target protein, the primer can trigger HCR events between alternating H1 and H2 hairpins to form a nicked double-helix. As a result, the pyrene excimers are formed to emit at approximately 485nm. On the contrary, upon binding of the specific target protein onto the primer through the protein-small molecule interaction, the HCR will be inhibited due to the steric and allosteric effect. The changes of the fluorescent signals of pyrene excimers are in response to the concentration of target protein, so that the detection of protein can be realized. We have demonstrated the feasibility of this strategy by using streptavidin (SA) and folate receptor (FR) as model targets. Results show that both of them can be well detected with a detection limit of 1.07nM and 2.7nM, respectively. The developed method for protein assay is flexible, so we infer that the one-pot strategy holds great potential for the detection of other proteins., (Copyright © 2016 Elsevier B.V. All rights reserved.)

An extensible multidimensional colorimetric sensor array for the detection of protein is developed based on DNA functionalized gold nanoparticles (DNA-AuNPs) as receptors. In the presence of different proteins, the aggregation behavior of DNA-AuNPs was regulated by the high concentrations of salt and caused different color change; while DNA-AuNPs grew induced by the reduction of HAuCl4 and NH2OH as a reductant on the surface of nanoparticles exhibited different morphologies and color appearance for different proteins. The transducers based on AuNPs modified by specific and nonspecific DNA enables naked-eye discrimination of the target analytes. This extensible sensing platform with only two receptors could simultaneously discriminate ten native proteins and their thermally denatured conformations using hierarchical cluster analysis (HCA) at the concentration of 50nM with 100% accuracy. This opens up the possibility of the sensor array to investigate the different conformational changes of biomacromolecules, and it gives a new direction of developing multidimensional transduction principles based on plasmonic nanoparticle conjugates. Furthermore, the sensing system could discriminate proteins at the concentration of 500nM in the presence of 50% human urine, which indicated this sensor array has great potential ability in analyzing real biological fluids. In addition, the multidimensional colorimetric sensor array is suitable for analysis of target analytes in the resource-restricted regions because of rapid, simple, low cost, and in-field detection with the naked eye., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Transglutaminase 2 (TG2) is an enzyme that plays a critical role in a wide variety of cellular processes through its multifunctional activities. TG2 kinase has emerged as an important regulator of apoptosis, as well as of chromatin structure and function. However, systematic investigation of TG2 kinase substrates is limited due to a lack of a suitable TG2 kinase activity assays. Thus, we developed a novel on-chip TG2 kinase activity assay for quantitative determination of TG2 kinase activity and for screening TG2 kinase substrate proteins in a high-throughput manner. Quantitative TG2 kinase activity was determined by selective detection of substrate protein phosphorylation on the surface of well-type amine arrays. The limit of detection (LOD) of this assay was 4.34μg/ml. We successfully applied this new activity assay to the kinetic analysis of 27 TG2-related proteins for TG2 kinase activity in a high-throughput manner and determined Michaelis-Menten constants (Km) of these proteins. We used the Km values and cellular locations of the TG2-related proteins to construct a substrate affinity map for TG2 kinase. Therefore, this on-chip TG2 kinase activity assay has a strong potential for the systematic investigation of substrate proteins and will be helpful for studying new physiological functions., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this study, we developed a multiplex immunoassay system that combines the suspension and planar microarray formats within a single layer of polydimethylsiloxane (PDMS) using soft lithography technology. The suspension format was based on the target proteins forming a sandwich structure between the magnetic beads and the quantum dot (QD) probes through specific antibody-antigen interactions. The planar microarray format was produced by fabricating an array of micro-wells in PDMS. Each micro-well was designed to trap a single microbead and eventually generated a microbead array within the PDMS chamber. The resultant bead-based on-chip assay could be used for simultaneously detecting three lung cancer biomarkers-carcinoembryonic antigen (CEA), fragments of cytokeratin 19 (CYFRA21-1) and neuron-specific enolase (NSE)-in 10 μl of human serum, with a wide linear dynamic range (1.03-111 ng/mL for CEA and CYFRA21-1; 9.26-1000 ng/ml for NSE) and a low detection limit (CEA: 0.19 ng/ml; CYFRA21-1: 0.97 ng/ml; NSE: 0.37 ng/ml; S/N=3). Our micro-well chip does not require complex e-beam lithography or the reactive ion etching process as with existing micro-well systems, which rely on expensive focused ion beam (FIB) milling or optical fiber bundles. Furthermore, the current approach is easy to operate without extra driving equipment such as pumps, and can make parallel detection for multiplexing with rapid binding kinetics, small reagent consumption and low cost. This work has demonstrated the importance of the successful application of on-chip multiplexing sandwich assays for the detection of biomarker proteins., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Herein we report a low cost, sensitive, supercapacitor-powered electrochemiluminescent (ECL) protein immunoarray fabricated by an inexpensive 3-dimensional (3D) printer. The immunosensor detects three cancer biomarker proteins in serum within 35 min. The 3D-printed device employs hand screen printed carbon sensors with gravity flow for sample/reagent delivery and washing. Prostate cancer biomarker proteins, prostate specific antigen (PSA), prostate specific membrane antigen (PSMA) and platelet factor-4 (PF-4) in serum were captured on the antibody-coated carbon sensors followed by delivery of detection-antibody-coated Ru(bpy)3(2+) (RuBPY)-doped silica nanoparticles in a sandwich immunoassay. ECL light was initiated from RuBPY in the silica nanoparticles by electrochemical oxidation with tripropylamine (TPrA) co-reactant using supercapacitor power and ECL was captured with a CCD camera. The supercapacitor was rapidly photo-recharged between assays using an inexpensive solar cell. Detection limits were 300-500f gmL(-1) for the 3 proteins in undiluted calf serum. Assays of 6 prostate cancer patient serum samples gave good correlation with conventional single protein ELISAs. This technology could provide sensitive onsite cancer diagnostic tests in resource-limited settings with the need for only moderate-level training., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Evanescent-wave excited fluorescence technology has been demonstrated to enhance sensitivity and reduce matrix effects, making it suitable for biosensor development. In this study, we developed a liposome-based, total internal reflection fluorescence, fiber-optic biosensor (TIRF-FOB) for protein detection, which integrates a liposomal amplifier and sandwich immunoassay format with TIRF-FOB. In addition, the antibody-tagged and fluorophore-entrapped liposomes for heterogeneous detection of target molecules were designed and synthesized. This biosensor successfully detected the target protein (model analyzed here is IgG) with a limit of detection (LOD) of 2.0 attomoles for the target protein (equivalent to 2.0 pg/mL of protein presented in 150 μL of sample solution). The features of this ultra-sensitive liposomal TIRF-FOB are (i) fluorescence is excited via evanescent waves and amplified via liposomes; (ii) the use of two polyclonal antibodies in the sandwich assay format increases the specificity and lowers the cost of our assay. Based on the exceptional detection sensitivity and cost-effectiveness, we believe that the proposed biosensor has great potential as a practical, clinical diagnostic tool in the near future., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Polyethylene glycol (PEG) hydrogel is permeable to biomolecules, but its permeability depends on the molecular weight of monomers and the concentration of monomer solutions. In this study, we show that PEG hydrogel made from 20% to 30% of PEG700 monomer is permeable to amino acids yet impermeable to oligopeptides. Because of its unique permeability, the gel can be used to detect protease by separating amino acids from oligopeptides when proteases cleave the oligopeptides and release amino acids. Based on this principle, an UV crosslinked gel array is fabricated on a chip for simultaneous detection of protease in up to 40 samples with only 1 µl of volume required for each sample. As a proof of concept, the on-chip protease assays are used to detect trypsin in buffer and serum. The detection limits are 1.2 nM in buffer and 17.7 nM in serum, which are comparable to conventional protease assays. Moreover, because only 1 µl of liquid is required, as little as 1.2 fmol of trypsin can be detected by using the on-chip assay. The protease assay also shows good specificity for trypsin and chymotrypsin. The gel array chip could be a useful miniaturized platform for high-throughput detection of different proteases and screening of their inhibitors., (Copyright © 2015 Elsevier B.V. All rights reserved.)

This paper describes potentiometric bioimaging for enzyme activity using a large-scale integration (LSI)-based electrochemical device with 400 sensors. Potentiometric detection is useful for bioimaging because redox species are not consumed or produced during the detection process; therefore, there is no effect on cell activity and the detectable signal is sustained. In this study, the potentiometer mode of the LSI-based device was applied for the detection of glucose oxidase (GOx) and alkaline phosphatase (ALP) activity. The enzyme activities were quantitatively detected within the concentration ranges of 25-250 μg/mL and 0.10-5.0 ng/mL. In addition, GOx activity in hydrogels and the ALP activity of embryoid bodies (EBs) from embryonic stem (ES) cells were successfully imaged based on detection of the open circuit potentials of individual sensors in real time. To the best of our knowledge, this is the first report of potentiometric imaging using LSI-based electrochemical arrays to detect enzyme activity in ES cells. The LSI-based device is thus demonstrated to be a promising tool for bioimaging of enzyme activity., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In this paper, a fluorescent biosensor has been developed for protein detection based on poly(thymine) (poly T)-templated copper nanoparticles (Cu NPs) and terminal protection of small molecule linked-DNA. This strategy was demonstrated by using small molecule biotin and its binding protein streptavidin (SA) as a model case. In this assay, biotin-linked poly T (biotin-T30) probe was specifically bound to the target protein SA with strong affinity in the presence of SA. The selective binding events confirmed that biotin-T30 probe was protected against the hydrolysis by exonuclease I (Exo I), which could effectively template the formation of fluorescent Cu NPs. The results revealed that the developed strategy was highly sensitive for detecting SA in the concentration range from 0.5 to 1000 nM with a detection limit of 0.1 nM. In addition, the relative standard deviation was 3.6% in 5 repetitive assays of 50 nM SA, which indicated that the reproducibility of the method was acceptable. Besides desirable sensitivity, the developed biosensor also showed high selectivity, low cost, and simplified operations. Thus, it could hold considerable potential to construct a simple, selective and sensitive fluorescent platform for detection of small molecule-protein interactions in molecular diagnostics and genomic research., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Here we introduce microelectrospotting as a new approach for preparation of protein-selective molecularly imprinted polymer microarrays on bare gold SPR imaging chips. During electrospotting both the gold chip and the spotting tip are electrically connected to a potentiostat as working and counter electrodes, respectively. The spotting pin encloses the monomer-template protein cocktail that upon contacting the gold surface is in-situ electropolymerized resulting in surface confined polymer spots of ca. 500 µm diameter. By repeating this procedure at preprogrammed locations for various composition monomer-template mixtures microarrays of nanometer-thin surface-imprinted films are generated in a controlled manner. We show that the removal and rebinding kinetics of the template and various potential interferents to such microarrays can be monitored in real-time and multiplexed manner by SPR imaging. The proof of principle for microelectrospotting of electrically insulating surface-imprinted films is made by using scopoletin as monomer and ferritin as protein template. It is shown that microelectrospotting in combination with SPR imaging can offer a versatile platform for label-free and enhanced throughput optimization of the molecularly imprinted polymers for protein recognition and for their analytical application., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Antibiotic residues, which are among the most common contaminants in animal-based food products such as milk, have become a significant public health concern. Here, we combine a multicolor quantum dot (QD)-based immunofluorescence assay and an array analysis method to achieve simultaneous, sensitive and visual detection of streptomycin (SM), tetracycline (TC), and penicillin G (PC-G) in milk. Antibodies (Abs) for SM, TC and PC-G were conjugated to QDs with different emission wavelengths (QD 520 nm, QD 565 nm and QD 610 nm) to serve as detection probes (QD-Ab). Then a direct competitive fluorescent immunoassay was performed in antigen-coated microtiter plate wells for simultaneous qualitative and quantitative detection of SM, TC, and PC-G residues, based on fluorescence of the QD-Ab probes. The linear ranges for SM, TC and PC-G were 0.01-25 ng/mL, 0.01-25 ng/mL and 0.01-10 ng/mL, respectively, with detection limit of 5 pg/mL for each of them. Based on fluorescence of the QD-Ab probes, residues of the three antibiotics were determined visually and simultaneously. Compared with a commercial enzyme-linked immunosorbent assay kit, our method could achieve simultaneous analysis of multiple target antibiotics in multiple samples in a single run (high-throughput analysis) and improved accuracy and sensitivity for analysis of residues of the three antibiotics in authentic milk samples. This new analytical tool can play an important role in ameliorating the negative impact of the residual antibiotics on human health and the ecosystem., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Small peptide can be used as an effective biological recognition element and provide an alternative tool for protein detection. However, the development of peptide-based detecting strategy still remains elusive due to the difficulty of signal transduction. Herein, we report a peptide-based colorimetric strategy for the detection of disease biomarker by using vascular endothelial growth factor receptor 1 (Flt-1) as an example. In this strategy, N-terminal aromatic residue-containing peptide modified gold nanoparticles (GNPs) can form bulky aggregate by the introduction of cucurbit[8]uril (CB[8]) that can selectively accommodate two N-terminal aromatic residue of peptides simultaneously regardless of their sequences. However, in the presence of Flt-1, the peptide can specifically bind to the protein molecule and the N-terminal aromatic residue will be occupied, resulting in little aggregation of GNPs. By taking advantage of the highly affinitive peptide and efficiency cross-linking effect of CB[8] to GNPs, colorimetric assay for protein detection can be achieved with a detection limit of 0.2 nM, which is comparable with traditional methods. The feasibility of our method has also been demonstrated in spiked serum sample, indicating potential application in the future., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In this study, a sensitive immune-biosensing system capable of multiplexed, real-time electrical readout was developed based on giant magnetoresistive (GMR) sensor array to detect a panel of protein biomarkers simultaneously. PAPP-A, PCSK9, and ST2 have been regarded as promising candidate biomarkers for cardiovascular diseases. Early detection of multiple biomarkers for a disease could enable accurate prediction of a disease risk. 64 nano-size GMR sensors were assembled onto one 16 mm × 16 mm chip with a reaction well, and they could work independently and be monitored simultaneously. A detect limit of 40 pg/mL for ST2 antigen had been achieved, and the dynamic ranges for the three proteins detection were up to four orders of magnitude. The GMR sensing platform was also selective enough to be directly used in serum samples. In addition, a lab-based probe station has been designed to implement quick lab-on-a-chip experiments instead of wire bonding. It has a potential application in clinical biomarkers identification and screening, and can be extended to fit other biosensing schemes., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Proteins are of great importance in medical and biological fields. In this paper, a novel fluorescent aptasensing strategy for protein assay has been developed based on target-triggered hybridization chain reaction (HCR) and graphene oxide (GO)-based selective fluorescence quenching. Three DNA probes, a helper DNA probe (HP), hairpin probe 1 (H1) and hairpin probe 2 (H2) are ingeniously designed. In the presence of the target, the aptamer sequences in HP recognize the target to form a target-aptamer complex, which causes the HP conformation change, and then triggers the chain-like assembly of H1 and H2 through the hybridization chain reaction, generating a long chain of HP leading complex of H1 and H2. At last the fluorescence indicator SYBR Green I (SG) binds with the long double strands of the HCR product through both intercalation and minor groove binding. When GO was added into the solutions after HCR, the free H1, H2 and SG would be closely adsorbed onto GO surface via π-π stacking. However, the HCR product cannot be adsorbed on GO surface, thereby the SG bound to HCR product gives a strong fluorescence signal dependent on the concentration of the target. With the use of platelet-derived growth factor BB (PDGF-BB) as the model analyte, this newly designed protocol provides a highly sensitive fluorescence detection of PDGF-BB with a limit of detection down to 1.25 pM, and also exhibit good selectivity and applicability in complex matrixes. Therefore, the proposed aptasensing strategy based on target-triggered hybridization chain reaction amplification should have wide applications in the diagnosis of genetic diseases due to its simplicity, low cost, and high sensitivity at extremely low target concentrations., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In the last years, nanopore technology has been increasingly exploited for biomolecule detection and analysis. Recently, the main focus of the research has moved from the study of nucleic acids to the analysis of proteins and DNA-protein complexes. In this paper, chemically functionalized solid-state nanopore has been used to recognize Nuclear Factor-kappa B proteins (NF-κB), that are involved in several disorders and inflammation processes, so that their identification is of crucial importance for prognostic applications. In particular, we show that it is possible to electrically detect the specific interaction between p50, a protein belonging to the NF-κB family, and dsLNA probe molecules covalently attached to the surface of a FIB fabricated SiN pore. The obtained results have been compared with those related to BSA protein, which does not interact with the used probes. Finally, the potential of the device has been further tested by analyzing a whole cell extract. In this case, three principal peaks in the distribution of electrical event duration can be identified, corresponding to different interacting NF-κB complexes, so that the methodology appears to be effective also to study biological samples of considerable complexity. Ultimately, the presented data emphasize the selectivity and versatility of the functionalized nanopore device, demonstrating its applicability in bioanalytics and advanced diagnostics., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Ligands for identifying protein aggregates are of great interest as such deposits are the pathological hallmark of a wide range of severe diseases including Alzheimer's and Parkinson's disease. Here we report the synthesis of an azide functionalized fluorescent pentameric oligothiophene that can be utilized as a ligand for multimodal detection of disease-associated protein aggregates. The azide functionalization allows for attachment of the ligand to a surface by conventional click chemistry without disturbing selective interaction with protein aggregates and the oligothiophene-aggregate interaction can be detected by fluorescence or surface plasmon resonance. In addition, a methodology where the oligothiophene ligand is employed as a capturing molecule selective for aggregated proteins in combination with an antibody detecting a distinct peptide/protein is also presented. We foresee that this methodology will offer the possibility to create a variety of multiplex sensing systems for sensitive and selective detection of protein aggregates, the pathological hallmarks of several neurodegenerative diseases., (Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.)

A novel composite film based on carbon nanodots (CNDs) and chitosan was readily prepared and used as immobilization matrix to entrap a heme protein, hemoglobin (Hb) for direct electrochemistry and bioelectrocatalysis. A modified electrode was obtained by casting Hb-CNDs-chitosan composites on the glassy carbon (GC) electrode surface. Spectroscopic and electrochemical studies showed that Hb entrapped in the composite film remained in its native structures, and CNDs in the film can greatly facilitate DET between the protein and the GC electrode. The electron-transfer kinetics of Hb in composite film was qualitatively evaluated by using the Marcus theory, and the apparent heterogeneous electron-transfer rate constant (ks) was estimated to be 2.39(±0.03)s(-1) with Laviron equations. The modified electrode showed excellent electrocatalytic behavior to the substrate, hydrogen peroxide (H2O2). The linear current response for H2O2 was from 1×10(-6) to 1.18×10(-4)M with a detection limit of 0.27(±0.02)μM at the signal-to-noise ratio of 3, and the apparent Michaelis-Menten constant was 0.067(±0.02)mM. These important features of CNDs-chitosan film have implied to be a promising platform for elaborating bioelectrochemical devices such as biosensors and biofuel cells., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Redox on an electrode is an interfacial phenomenon that modulates the charge in the electrical double layer (EDL). A novel instrument, the Scanning Electrometer for Electrical Double-layer (SEED) has been developed to measure multiple enzyme reactions on a monolith electrode due to immunospecific binding with a mixture of respective analytes. SEED quantitatively maps the local redox reaction by scanning a laser on the array of enzyme monolayer spots immobilized on the monolith electrode. SEED measures the change in local charge state of the EDL that abruptly changes due to the redox reaction. The measurement spot size defined by the size of the laser beam is ~10 µm. The SEED signal is linearly proportional to the local redox current density and analyte concentration. The specificity is close to 100%. The SEED readout is compatible with microfluidics platform where the signal degrades less than 2% due to the poly(dimethyl siloxane) (PDMS) body., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Recently discovered effects of plasmonic field on molecular fluorescence offer new insights into the optical interactions at the nanoscale which can help solving problems encountered in widely applied fluorescent labeling of biomolecules for studying life processes in biomedicine and pharmacy. In this work, we have focused on exploring a novel sensitivity-enhancing phenomenon based on protein modulation of plasmon-controlled fluorescence. We have demonstrated that a protein (cytochrome c (Cytc c) or bovine serum albumin (BSA)) can be employed to gate fluorescence resonance energy transfer occurring from a fluorescein isothiocyanate fluorescent dye to plasmonic citrate-capped gold nanoparticles. By applying plasmonic field gated by protein, facilitated by the formation of multi-shell nanoparticles, (AuNP@Cit/Cytc-FITC or AuNP@Cit/BSA-FITC), low limits of detection for Cyt c (LOD = 370 pM) and for BSA (LOD = 1.8 nM) have been achieved even for large fluorophore:protein ratios, up to 30:1 (over-labeling), normally plagued with energy migration and background fluorescence problems. Control experiments confirming adsorption of proteins on AuNPs have been performed using light scattering and piezometric techniques. The proposed nanoassay may be applied in microanalysis of trace amounts of proteins, e.g. in microfluidic devices., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Integrated biochips exploit a multi-disciplinary approach to produce portable point-of-care medical diagnostic systems that uncouple diagnosis from centralized laboratories. These portable devices are cost effective and have several advantages including broader accessibility to health care worldwide. Fluorescence detection of a disease-specific probe excited by an optical source is one of the most diffused methods for quantitative analysis on biochips. Here we designed and characterized a miniaturized biochip based on a novel deep-blue organic light-emitting diode. The molecular design of the diode was optimized to excite a fluorophore-conjugated antibody and tested on a protein microarray configuration with good sensitivity and specificity. These findings will be instrumental for the development of next generation point-of-care biochips., (Copyright © 2013 Elsevier B.V. All rights reserved.)

CD-based optico-acoustical biosensor (OAB) was used for detection of various types of proteins represented by bovine serum albumin (BSA), heme-containing myoglobin (Mb), monoclonal antibody against viral protein marker of hepatitis B (anti-HBsAg) and membrane-bound cytochrome P450scc (P450scc). We applied standard compact disc reader (CD-ROM) as an optical analyzer and a standard compact disc (CD) as a biochip containing immobilized protein molecules. This biosensor can translate into a digital code the changes of optical signal from the proteins and their complexes immobilized on the CD surface. Then, the digital code is translated into an acoustic series or, in other words, into a "music of proteins". We demonstrate the use of the OAB for direct detection of proteins with different molecular weights, such as BSA, Mb, P450scc, anti-HBsAg with the concentration detection limit (DL) about 10(-7)M. By signal amplification achieved with autometallography, a higher sensitivity level (DL∼10(-9)M) for the detection of myoglobin was obtained. The method of OAB-detection of proteins is cheap: it requires no special equipment like spectrometers, refractometers and other devices. Due to the fact that acoustic series of the protein complexes antigen/antibody differs from that of single proteins, the OAB-detection is of particular interest for rapid assay in yes/no data type and for home diagnostics. Combination of the OAB with a mass spectrometer allowed the detection and identification of the target proteins fished out directly onto a standard CD surface., (Copyright © 2012 Elsevier B.V. All rights reserved.)

In this work, we describe a new sensitive strategy for electrochemical detection of protein via small molecule/protein interactions. This assay is based on a terminal protection mechanism that small molecule-linked single-stranded DNA (ssDNA) is protected against hydrolysis by exonuclease I when the target protein is captured by the corresponding small molecule recognition element. Positively charged gold nanoparticles (AuNPs) are attached to the termini-protected and negatively charged ssDNA through electrostatic interactions. Subsequent AuNP-catalyzed silver enhancement followed by a highly characteristic and sensitive solid-state Ag/AgCl process is introduced to the sensing platform to amplify the signal output. By combining the amplification ability resulting from the silver deposition on the surface-captured AuNPs with the inherent high sensitivity of the electrochemical solid-state Ag/AgCl process, our method expands its range to the detection of macromolecules that bind to specific small molecules and enables low picomolar detection of protein. As a model of biotin/streptavidin interaction, a detection limit of 10 pM for streptavidin is readily achieved with desirable sensitivity and specificity, which indicates that the terminal protection assay coupled with the electrochemical solid-state Ag/AgCl process can offer a promising platform for the determination of various of types of proteins or small molecule-protein interactions., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The fluorescence emission intensity of ZnSe quantum dots (QDs) conjugated to proteins to form QD-based biomolecular sensors increases significantly upon binding of the sensors to target proteins in solution. This phenomenon enables the development of homogeneous, separation-free immunoassays for rapid quantitative detection of proteins in solution. Proof-of-principle assays were developed by dosing a solution containing a biomolecular target with a solution containing the corresponding QD-based sensor and monitoring the changes in the peak fluorescence emission intensity of the QDs. Direct immunoassays for detecting basic fibroblast growth factor (bFGF) and prostate-specific antigen (PSA) in solution were demonstrated using QD-anti-bFGF and QD-anti-PSA sensors. A competitive immunoassay for detecting human serum albumin (HSA) was also demonstrated by dosing samples containing HSA with QD-HSA sensors and free anti-HSA antibodies. The QD-HSA sensors were tested in 1000× diluted human serum and found to be unaffected by interference from other proteins. The lower limit of detection of the assays was equal to the lowest sensor concentration in the solution that can be unambiguously detected, typically less than 1 nM. The dynamic range of the assays was determined by identifying the sensor concentration above which optical interference between QDs affected adversely the observed fluorescence emission intensity. The upper limit of this concentration was 2.5 μM for 4 nm QDs. The ZnSe QD-based sensors were stable and preserved ~80% of their initial peak emission intensity after two months in refrigerated storage. These biosensors have potential applications in rapid sensing of target proteins for emergency and point-of-care diagnostic applications., (Copyright © 2012 Elsevier B.V. All rights reserved.)

There is an urgent need to identify relevant tumor markers showing high sensitivity and specificity for early diagnosis and prognosis of breast cancer. Protein microarrays have demonstrated to be cost-effective, high through-put and powerful tools for screening and identifying tumor markers with only minute samples. Autoantibodies directed against tumor-associated antigens (TAAs) were shown to be relevant tumor markers. However, due to the variability of immune response from one individual to another and depending on the type of cancer, detection of only one type of anti-TAA autoantibody is not sufficient to give a reliable and precise diagnosis. It is necessary to use a set of several TAAs for determining specific autoimmune profiles. Therefore, combining various TAAs on different surfaces could improve sensitivity and specificity for anti-TAA autoantibody detection. Herein a panel of 10 proteins, including well-known tumor-associated antigens (TAAs) and potential new biomarkers of breast cancer, were immobilized onto microstructured microarray under optimized conditions (spotting pH buffer, surface chemistry, blocking procedure), in order to determine an autoimmune signature of breast cancer. Sera from 29 breast cancer patients and 28 healthy donors were screened in sandwich immunoassays on the miniaturized system to detect the eventual presence of anti-TAAs autoantibodies. Results indicated that the detection level of each anti-TAA autoantibody in a given serum sample was strongly dependant on the surface chemistry. Combining five TAAs (p53, Hsp60, Hsp70, Her2-Fc, NY-ESO-1) on two different surface chemistries (NHS and APDMES) allowed the significant detection of more than 82% breast cancer sera., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A sensing interface for specific protein capture was fabricated using a novel molecular imprinting (MIP) process. Bovine serum albumin (BSA) and ovalbumin (OVA) were imprinted on a quartz substrate with modified alkyl groups, and target protein capture was detected using a deep-UV fluorescence image microscope (UVFLIM). The imprinted protein was immobilized to silica beads (diameter: 15 μm) using a phospholipid polymer containing both active ester groups and silane coupling groups, which were used as protein stamps to prepare the imprinting surface. Protein recognition sites were constructed by integrating sodium dodecyl sulfate (SDS) as the ligand, which was immobilized with a biocompatible photoreactive phospholipid polymer. When BSA solution was added to the BSA-based MIP substrate, strong fluorescence was observed from the tryptophan residue of BSA. In contrast, for the OVA-based MIP substrate and non-MIP substrate, no fluorescence was observed. The surface showed good selectivity of BSA against OVA. The phospholipid polymer layer prevented non-specific protein adsorption, resulting in highly selective protein recognition. Further, when the protein-imprinted substrate was constructed without ligands, neither protein was captured on the substrate. We demonstrated the importance of ligand integration for capturing target proteins at specific positions. UVFLIM can be used to detect biomolecules at the single-molecule level by using intrinsic fluorescence without molecular labeling. Our new protein-imprinted surface used with UVFLIM is a versatile tool for capturing biomolecules., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Nowadays, there is a great interest for understanding the structure/function relationship governing recognition of carbohydrates by their receptors for the design of new treatments. Indeed, carbohydrates and glycoconjugates play a major role in key biological events such as cell-cell recognition, pathogenesis inflammation, and host pathogen interactions. Pseudomonas aeruginosa (PA) is one of the predominant bacterium encountered in nosocomial infections. PA infections often lead to chronic inflammation and eventually to death despite aggressive antibiotic therapy: the emergence of resistant strains and biofilm formation seems to give a selective advantage to the bacterium. A promising approach is to inhibit the virulence factors of PA such as PA-IL which is a galactose specific lectin. Herein, we develop a microarray to probe the binding of six galacto-conjugates to PA-IL differing by their spatial configuration and geometry. This microsystem is made of 40 independent microwells in which 64 spots of glycoconjugates probes are arrayed by using DNA Directed Immobilization (DDI). This microsystem allows, in a multiplex fashion, qualitative information on the binding by direct fluorescence readout as well as quantitative information by the determination of IC(50) values in a competition assay and surface dissociation constants (K(d)). According to our data, direct fluorescent signals (FI(635)), IC(50) and K(d) values provided similar ranking for glycoconjugates with respect to PA-IL binding thus affording a general tool for the selection of galacto-conjugates displaying the best affinities toward PA-IL., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The use of gold nanoparticles (AuNPs) as labeling carriers in combination with the enzymatic activity of the horseradish peroxidase (HRP) in order to achieve an improved optical lateral flow immunoassay (LFIA) performance is presented here. Briefly in a LFIA with an immune-sandwich format AuNPs are functionalized with a detection antibody already modified with HRP, obtaining an 'enhanced' label. Two different detection strategies have been tested: the first one following just the red color of the AuNPs and the second one using a substrate for the HRP (3 different substrates are evaluated), which produces a darker color that enhances the intensity of the previous red color of the unmodified AuNPs. In such very simple way it is gaining sensitivity (up to 1 order of magnitude) without losing the simplicity of the LFIA format, opening the way to other LFIA applications including their on-demand performance tuning according to the analytical scenario., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The potential of aptamers as ligand binding molecule has opened new avenues in the development of biosensors for cancer oncoproteins. In this paper, a label-free detection strategy using signaling aptamer/protein binding complex for platelet-derived growth factor (PDGF-BB) oncoprotein detection is reported. The detection mechanism is based on the release of fluorophore (TOTO intercalating dye) from the target binding aptamer's stem structure when it captures PDGF. Amino-terminated three-dimensional carbon microarrays fabricated by pyrolyzing patterned photoresist were used as a detection platform. The sensor showed near linear relationship between the relative fluorescence difference and protein concentration even in the sub-nanomolar range with an excellent detection limit of 5pmol. This detection strategy is promising in a wide range of applications in the detection of cancer biomarkers and other proteins., (Copyright © 2012 Elsevier B.V. All rights reserved.)

We demonstrate a method to create high density protein microarrays with excellent spot uniformity using photolithography and plasma processing on low cost commercially available microscope glass slides. Protein deposition and fluorescence signal evaluation on these substrates are performed by standard arrayers and scanners. To this end, spots of commercial photoresists (AZ5214, SU8 and Ormocomp(®)) were defined through lithography on glass substrates followed by short SF(6) plasma treatment and selective protein adsorption on these spots with respect to glass (spot to background fluorescence signal ratios 30:1 to 40:1) was demonstrated using model protein binding assays. Among the photoresists tested, Ormocomp was selected since it provided the highest protein binding capacity. No ageing of Ormocomp/glass substrates in terms of protein binding capacity was observed for at least two months. Besides to protein microarrays, DNA microarrays were also developed by spotting streptavidin-biotinylated oligonucleotide conjugates corresponding to wild- and mutant-type sequences of four deleterious BRCA1 gene mutations. For all of the examined mutations, higher specific hybridization signals (1.5-4 times) and improved discrimination ratios between wild- and mutant-type sequences as well as higher spot uniformity and repeatability were demonstrated on Ormocomp/glass substrates with intra- and inter-spot CVs of 8.0% and 4.5%, respectively, compared to commercial polystyrene (intra- and inter-spot CVs 36% and 18%) and epoxy-coated glass (intra- and inter-spot CVs 26% and 20%) slides. Thus, the proposed substrates can be readily applied to protein and DNA microarrays fabrication and, moreover, the described method for selective protein adsorption can be advantageously implemented in various analytical microdevices for multi-analyte detection., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Genetically coded fluorescent protein (FP)-based biosensors are powerful tools for the non-invasive tracking of molecular events in living cells. Although a variety of FP biosensors are available, the simultaneous imaging of multiple biosensors (multi-parameter imaging) in single living cells remains a challenge and is far from routinely used to elucidate the intricate networks of molecular events. In this study, we established a novel combination of FP biosensors for dual-parameter ratiometric imaging, consisting of a new fluorescence resonance energy transfer (FRET) pair mVenus (yellow FP)/mKOκ (orange FP)-based (abbreviated as YO) biosensor and a single FP-based biosensor Grx1-roGFP2. Under our imaging condition, 1.4±0.05% of Grx1-roGFP2 signal contributes to the mVenus channel and 5.2±0.12% of the mVenus signal contributes to the Grx1-roGFP2 channel. We demonstrate that such low degree of cross-talk causes negligible distortion of the ratiometric signal of the YO-based FRET biosensor and Grx1-roGFP2. By using this dual-parameter ratiometric imaging approach, we achieved simultaneous imaging of Src/Ca(2+) signaling and glutathione (GSH) redox potential in a single cell, which was previously unattainable. Furthermore, we provided direct evidence that epidermal growth factor (EGF)-induced Src signaling was negatively regulated by H(2)O(2) via its effect on GSH-based redox system, demonstrating the power of this dual-parameter imaging approach for elucidating new connections between different molecular events that occur in a single cell. More importantly, the dual-parameter imaging approach described in this study is highly extendable., (Copyright © 2011 Elsevier B.V. All rights reserved.)

We present a fast and effective method for anchoring bioreceptors to optical waveguides exhibiting a poorly reactive polymer interface and that have to be minimally perturbed with respect to their design. The study originated from the need to biofunctionalize a fiber optic Long Period Grating (LPG) that is tuned in a highly sensitive working point, the so-called transition mode, through the deposition of a high refractive index overlay. In particular, a thin film of atactic polystyrene (PS) was dip-coated onto the LPG with a thickness suitable to optimize the LPG sensitivity to refractive index changes of the surrounding medium. Bovine serum albumin was selected as sacrificial layer for its well-known adhesion capabilities to PS surfaces, then glutaraldehyde was used to conjugate IgGs, serving as prototypical bioreceptor, on the device surface. The effectiveness of the immobilization method was assessed by studying the interaction between the immobilized IgG with a suitable anti-IgG. In a preliminary study performed by means of ELISA and surface plasmon resonance, optimal conditions for the biomolecular testing with the LPG were assessed. Four distinct interactions were thus monitored in real time following the shift of the LPG attenuation band. These experiments suggest a novel and interesting biofunctionalization approach of unreactive polymers with applications in immunosensing and basic life science research., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The circulating population of peripheral T lymphocytes obtained from a blood sample can provide a large amount of information about an individual's medical status and history. Recent evidence indicates that the detection and functional characterization of antigen-specific T cell subsets within the circulating population may provide a diagnostic indicator of disease and has the potential to predict an individual's response to therapy. In this report, a microarray detection platform that combines grating-coupled surface plasmon resonance imaging (GCSPRI) and grating-coupled surface plasmon coupled emission (SPCE) fluorescence detection modalities were used to detect and characterize CD4(+) T cells. The microspot regions of interest (ROIs) printed on the array consisted of immobilized antibodies or peptide loaded MHC monomers (p/MHC) as T cell capture ligands mixed with additional antibodies as cytokine capture ligands covalently bound to the surface of a corrugated gold sensor chip. Using optimized parameters, an unlabeled influenza peptide reactive T cell clone could be detected at a frequency of 0.1% in a mixed T cell sample using GCSPRI. Additionally, after cell binding was quantified, differential TH1 cytokine secretion patterns from a T cell clone cultured under TH1 or TH2 inducing conditions was detected using an SPCE fluorescence based assay. Differences in the secretion patterns of 3 cytokines, characteristic of the inducing conditions, indicated that differences were a consequence of the functional status of the captured cells. A dual mode GCSPRI/SPCE assay can provide a rapid, high content T cell screening/characterization tool that is useful for diagnosing disease, evaluating vaccination efficacy, or assessing responses to immunotherapeutics., (Copyright © 2011 Elsevier B.V. All rights reserved.)

A new type of molecularly imprinted polymer (MIP)-based fluorescent artificial receptor was developed by anchoring MIP on the surface of denatured bovine serum albumin (dBSA) modified CdTe quantum dots (QDs) using the surface molecular imprinting process. The approach combined the merits of molecular imprinting technology and the fluorescent property of the CdTe QDs. The dBSA was used not only to modify the surface defects of the CdTe QDs, but also as assistant monomer to create effective recognition sites. Three different proteins, namely lysozyme (Lyz), cytochrome c (Cyt) and methylated bovine serum albumin (mBSA), were tested as the template molecules and then the receptors were synthesized by sol-gel reaction (imprinting process). The results of fluorescence and binding experiments demonstrated the recognition performance of the receptors toward the corresponding template. Under optimum conditions, the linear range for Lyz was from 1.4×10(-8) to 8.5×10(-6) M, and the detection limit was 6.8 nM. Moreover, the new artificial receptors were applied to separate and detect Lyz in real samples. This fluorescent artificial receptor may serve as a starting point in the design of highly effective synthetic fluorescent receptor for recognition of target protein., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Single polypyrrole (PPy) nanowire-based microfluidic aptasensors were fabricated using a one-step electrochemical deposition method. The successful incorporation of the aptamers into the PPy nanowire was confirmed by fluorescence microscopy image. The microfluidic aptasensor showed responses to IgE protein solutions in the range from 0.01 nM to 100 nM, and demonstrated excellent specificity and sensitivity with faster response and rapid stabilization times (~20 s). At the lowest examined IgE concentration of 0.01 nM, the microfluidic aptasensor still exhibited ~0.32% change in the conductance. The functionality of this aptasensor was able to be regenerated using an acid treatment with no major change in sensitivity. In addition, the detection of cancer biomarker MUC1 was performed using another microfluidic aptasensor, which showed a very low detection limit of 2.66 nM MUC1 compared to commercially available MUC1 diagnosis assay (800 nM)., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Using microarrays to probe protein-protein interactions is becoming increasingly attractive due to their compatibility with highly sensitive detection techniques, selectivity of interaction, robustness and capacity for examining multiple proteins simultaneously. The major drawback to using this approach is the relatively large volumes and high concentrations necessary. Reducing the protein array spot size should allow for smaller volumes and lower concentrations to be used as well as opening the way for combination with more sensitive detection technologies. Dip-Pen Nanolithography (DPN) is a recently developed technique for structure creation on the nano to microscale with the capacity to create biological architectures. Here we describe the creation of miniaturised microarrays, 'mesoarrays', using DPN with protein spots 400× smaller by area compared to conventional microarrays. The mesoarrays were then used to probe the ERK2-KSR binding event of the Ras/Raf/MEK/ERK signalling pathway at a physical scale below that previously reported. Whilst the overall assay efficiency was determined to be low, the mesoarrays could detect KSR binding to ERK2 repeatedly and with low non-specific binding. This study serves as a first step towards an approach that can be used for analysis of proteins at a concentration level comparable to that found in the cellular environment., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The secretions of molecules by cells are of tremendous interest for both fundamental insights studies and medical purposes. In this study, we propose a new biochip-based approach for the instantaneous monitoring of protein secretions, using antibody production by B lymphocytes cultured in vitro. This was possible thanks to the Surface Plasmon Resonance imaging (SPRi) of a protein biochip where antigen proteins (Hen Egg Lysozyme, HEL) were micro-arrayed along with series of control proteins. B cell hybridomas were cultured on the chip and the secretion of immunoglobulins (antibody) specific to HEL was monitored in real-time and detected within only few minutes rather than after a 30-60 min incubation with standard ELISA experiments. This fast and sensitive detection was possible thanks to the sedimentation of the cells on the biochip sensitive surface, where local antibody concentrations are much higher before dilution in the bulk medium. An other interesting feature of this approach for the secretion monitoring was the independence of the SPR response--after normalization--regarding to the density of the surface-immobilized probes. Such biosensor might thus pave the way to new tools capable of both qualitative and semi-quantitative analysis of proteins secreted by other immune cells., (Copyright © 2010 Elsevier B.V. All rights reserved.)

There has been immense interest in both instruments and methods to enhance fluorescence signal and achieve highly sensitive fluoroimmunoassay (FIA). In this paper, we present a facile, low-cost and general method of biotinylated colloidal photonic crystal (PC) to improve the FIA of avidin (avidin FIA). The fluorescence signal intensity of the avidin FIA on the colloidal PC can be enhanced over two orders of magnitude relative to the control sample, attributed to the large surface area, resonance field and coherent scattering effect of the colloidal PC. The detection limit is shrunk to 1/69 of that of the control sample. Furthermore, the signal to interference ratio (S/I ratio) is increased because the band-edge induced fluorescence enhancement is wavelength-selective. The interference fluorescence does not go up proportionally while the signal is significantly enhanced by the colloidal PCs. It is believed that the colloidal PC modified with biotin can act as an effective material for a general and sensitive fluoroimmunoassay., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Fluorescence-free biosensor arrays for protein detection directly measure the protein surface density, and do not require a fluorophore or enzyme label, and provide quantitative and consistent signals. However, few fluorescence-free biosensor protein arrays have demonstrated successful application in high-background samples, such as serum, due to non-specific binding. We tested the BioCD as a fluorescence-free biosensor based on optical interferometry, and used it to detect prostate specific antigen (PSA, a biomarker of prostate cancer) in patient sera in a 96-well anti-PSA microarray. We have attained a 4 ng/ml detection limit in serum and have measured PSA concentrations in patient sera. The measured concentrations correlated well with enzyme-linked immunosorbent assay (ELISA) results. The measurement of PSA concentrations in high-level protein backgrounds suggests that the BioCD has a potential for clinical applications by removing the restriction of fluorescence-free biosensors from high-background applications., (Copyright © 2010. Published by Elsevier B.V.)

Protein microarrays for disease diagnostics are required to accurately quantify analytes in the low pg/mL range. This task is hampered by weak signal strengths and too low detector sensitivity. Herein we present reflective gold chips coated with polyelectrolyte multilayers (PEMs) for signal enhancement in immunoassays for melanoma-relevant biomarkers. Among tested (semi)natural polysaccharides (xanthan, chitosan, carboxymethylcellulose, hyaluronic acid) PEMs composed of xanthan and chitosan performed best in terms of detection of low analyte concentrations (ED10), spot morphology, fluorescence background and variability (<10%). Fluorescence signals on gold slides with a 75 nm coating of seven crosslinked polyelectrolyte double layers were up to 50 times higher than on bare glass slides. In comparison to commercial substrates the signal to noise ratio is enhanced by up to factor 11. Furthermore sandwich assays for interleukins 6, 8, 10, tumour necrosis factor alpha (TNFα), vascular endothelial growth factor A (VEGF-A) and S100B show working ranges which cover significantly lower concentrations (up to 38-fold). Not limited to above assays the presented substrates, which combine a biocompatible interface with metal-based signal amplification, are a valuable tool in a variety of biosensor applications., (Copyright © 2010 Elsevier B.V. All rights reserved.)

This paper reports a highly reproducible immunoassay of cancer markers using surface-enhanced Raman scattering (SERS) imaging. SERS is a highly sensitive detection method but it is limited in its ability to achieve reproducible signal enhancement because of the difficulty with precisely controlling the uniform distribution of hot junctions. Consequently, inconsistent enhancement prevents the wide exploitation of SERS detection as a bio-detection tool for quantitative analysis. To resolve this problem, we explored the use of a SERS imaging-based immunoassay. For this purpose, Raman reporter-labeled hollow gold nanospheres (HGNs), were manufactured and antibodies were immobilized onto their surfaces for targeting specific antigens. After the formation of sandwich immunocomplexes using these functional HGNs on the surfaces of gold patterned wells, the SERS mapping images were measured. For target protein markers, 12×9 pixels were imaged using a Raman mapping technique in the 0-10(-4) g/mL concentration range, and the SERS signals for 66 pixels were averaged. Here, the SERS imaging-based assay shows much better correlations between concentration and intensity than does the conventional point-based assay. The limits of detection were determined to be 0.1 pg/mL and 1.0 pg/mL for angiogenin (ANG) and alpha-fetoprotein (AFP), respectively. This detection sensitivity is increased by three or four orders of magnitude over that of conventional ELISA method. The detectable dynamic range for SERS imaging (10(-4)-10(-12) g/mL) is also much wider than that for ELISA (10(-6)-10(-9) g/mL)., (Copyright © 2010 Elsevier B.V. All rights reserved.)

A miniature multi-sample chip for protein detection with a bench-top magnetic resonance imager was created on the basis of magnetic relaxation switches. The chip was assessed with two protein systems. Both qualitative and quantitative results for the target proteins were obtained by image analysis and relaxation time measurement, respectively. The detection of prostate specific antigen, the serum marker of human prostate cancer, showed a linear concentration range of 17.3-43.2 ng mL(-1) and a detection limit of 13.7 ng mL(-1). As proof of concept, the analysis of 18 samples with a volume of 6.37 μL each was completed in 26 min by this chip. This technique may become an easy and efficient approach for rapid and high-throughput protein assay and protein-protein interaction screening., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Peptide microarray can be implemented by immobilization of peptides on a solid support or by direct on-chip peptide synthesis (OCPS). In the first case, peptide primary sequences can be ensured prior to their immobilization but structural diversity is achieved at high cost in terms of reagents. In the second case, high diversity is achieved with low amount of reagents but the primary and secondary structures cannot be ascertained. In both cases, the immobilization step will influence the overall biological activity. We proposed a strategy where direct peptide on-chip synthesis and peptide immobilization are viewed as complementary approaches. In a first step, OCPS is envisioned for the screening and selection of biologically relevant peptides. In a second step, selected peptides would be synthesized on resin, qualified and immobilized for implementing microarrays (i.e. for diagnosis). A versatile surface chemistry for both OCPS and peptide immobilization was developed allowing for an identical physico-chemical environment for both implementation strategies. In the present report, a 16 mer peptide corresponding to the human histone H3 epitope was synthesized on an amino-functionalized support. Surface stability (including upon deprotection steps) and peptide primary and secondary structures were assessed with Cy3-streptavidine conjugates and with immunoassays. Peptides, either on-chip synthesized or immobilized, exhibited a similar biological activity., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The development and testing of a portable bioanalytical device which was capable for real-time monitoring of binding assays was demonstrated. The device was based on arrays of nine optoelectronic transducers monolithically integrated on silicon chips. The optocouplers consisted of nine silicon avalanche diodes self-aligned to nine silicon nitride waveguides all converging to a single silicon detector. The waveguides were biofunctionalized by appropriate recognition molecules. Integrated thick polymer microchannels provided the necessary fluidic functions to the chip. A single sided direct contact scheme through a board-to-board receptacle was developed and combined with a portable customized readout and control instrument. Real-time detection of deleterious mutations in BRCA1 gene related to predisposition to hereditary breast/ovarian cancer was performed with the instrument developed using PCR products. Detection was based on waveguided photons elimination through interaction with fluorescently labeled PCR products. Detection of single biomolecular binding events was also demonstrated using nanoparticles as labels. In addition, label-free monitoring of bioreactions in real time was achieved by exploiting wavelength filtering on photonic crystal engineered waveguides. The proposed miniaturized sensing device with proper packaging and accompanied by a portable instrument can find wide application as a platform for reliable and cost effective point-of-care diagnosis., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The performance of biomedical microdevices requires the accurate control of the biomolecule concentration on the surface, as well as the preservation of their bioactivity. This desideratum is even more critical for proteins, which present a significant propensity for surface-induced denaturation, and for microarrays, which require high multiplexing. We have previously proposed a method for protein immobilisation on micro/nanostructures fabricated via laser ablation of a thin metal layer deposited on a transparent polymer. This study investigates the relationship between the properties of the micro/nanostructured surface, i.e., topography and physico-chemistry, and protein immobilisation, for five, molecularly different proteins, i.e., lysozyme, myoglobin, α-chymotrypsin, human serum albumin, and human immunoglobulin. Protein immobilisation on microstructures has been characterised using quantitative fluorescence measurements and atomic force microscopy. It has been found that the sub-micrometer-level, combinatorial nature of the microstructure translates in a 3-10-fold amplification of protein adsorption, as compared to flat, chemically homogenous polymeric surfaces. This amplification is more pronounced for smaller proteins, as they can capitalize better on the newly created surface and variability of the nano-environments., (Copyright © 2010 Elsevier B.V. All rights reserved.)