Search

Algae is a well-known organism that its characteristic is prominent for biofuel production and wastewater remediation. This critical review aims to present the applicability of algae with in-depth discussion regarding three key aspects: (i) characterization of algae for its applications; (ii) the technical approaches and their strengths and drawbacks; and (iii) future perspectives of algae-based technologies. The process optimization and combinations with other chemical and biological processes have generated efficiency, in which bio-oil yield is up to 41.1%. Through life cycle assessment, algae bio-energy achieves high energy return than fossil fuel. Thus, the algae-based technologies can reasonably be considered as green approaches. Although selling price of algae bio-oil is still high (about $2 L -1 ) compared to fossil fuel's price of $1 L -1 , it is expected that the algae bio-oil's price will become acceptable in the next coming decades and potentially dominate 75% of the market., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

This study aimed to evaluate the impact of C/N ratio on the performance of a hybrid sponge-assisted aerobic moving bed-anaerobic granular membrane bioreactor (SAAMB-AnGMBR) in municipal wastewater treatment. The results showed that organic removal efficiencies were above 94% at all C/N conditions. Nutrient removal was over 91% at C/N ratio of 100/5 but was negatively affected when decreasing C/N ratio to 100/10. At lower C/N ratio (100/10), more noticeable membrane fouling was caused by aggravated cake formation and pore clogging, and accumulation of extracellular polymeric substances (EPS) in the mixed liquor and sludge cake as a result of deteriorated granular quality. Foulant analysis suggested significant difference existed in the foulant organic compositions under different C/N ratios, and humic substances were dominant when the fastest fouling rate was observed. The performance of the hybrid system was found to recover when gradually increasing C/N ratio from 100/10 to 100/5., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

In this paper, bioaugmentation was applied to upgrade a full-scale activated sludge system (S2) into a contact oxidation system (S1). Results showed that when chemical oxygen demand (COD) and ammonia nitrogen (NH(4)(+)-N) concentration of the petrochemical wastewater were 320-530 mg/L and 8-25mg/L, respectively, the bioaugmented process (S1) took only 20 days when they were below 80 mg/L and 10mg/L, respectively. However, the unbioaugmented conventional activated sludge process (S2) spent 30 days to reach the similar effluent quality. As the organic loading rate (OLR) increased from 0.6 to 0.9 and finally up to 1.10 kg COD/m(3)d, S1 showed strong resistance to shock loadings and restored after three days compared to the seven days required by S2. Based on the results of this paper, it shows that bioaugementation application is feasible and efficient for the process upgrade due to the availability of the bioaugmented specialized consortia.