Search

Biomass pretreatment is an essential strategy to overcome biomass recalcitrance and promote lignocellulosic bioconversion. Here, a reusable organic solvent system (formic acid-methanesulfonic acid) was explored to pretreat poplar under a mild temperature (below 100 °C). The results showed that the co-solvent system could extract basically complete hemicelluloses and part of lignin with original cellulose retained in the pretreated substrates. Meanwhile, sulfonic acid groups were introduced into lignin structure remained in the substrates. The glucose conversion yield of the substrates with a higher concentration of sulfonic acid groups (13.2 mmol/kg) reached 45.9 % by reducing the hydrophobic interaction between lignin and cellulase, showing 89.3 % improvement compared with that of the substrates treated with single formic acid. This progressive study aimed to develop a new strategy to realize sulfonation and promote enzymatic hydrolysis of substrates by using mild organic solvent pretreatment., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

During the traditional autohydrolysis, formation and deposition of "pseudo-lignin" and lignin droplets on the surface of biomass had a detrimental effect on the subsequent biomass conversion. In this study, isothermal phase separation was introduced into autohydrolysis, and the effects of isothermal phase separation on the dissolution of components and enzymatic hydrolysis of bamboo were studied. The research showed that isothermal phase separation after autohydrolysis without cooling had an effective reduction in the deposition of "pseudo-lignin" and lignin droplets on the residues surface. After isothermal phase separation, the contents of sugar (14.05 g/L) and lignin (6.16 g/L) in pre-hydrolysates increased by 20% and 19% compared with control, respectively. Moreover, the efficient removal of "pseudo-lignin" and lignin droplets from cell wall surface could further promote the biological conversion of pretreated biomass (22% higher than that of control) during the subsequent enzymatic hydrolysis., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Formic acid/water binary solvent extraction with formic acid fraction lower than 77.5% (w/w) of azeotrope was used to extract hemicellulose-derived saccharides from poplar wood at various levels of severity. The highest xylose yield of 77.8% and arabinose yield of 93.5% were obtained at 120 °C and 1 h. To reduce cellulose hydrolysis and facilitate downstream xylose crystallization, mild conditions at 90 °C and 4 h was chosen as optimum severity, which led to the highest xylose fraction of 81.7% in all saccharides extracted, with a remarkable xylose yield of 73.1%. Mass balance analysis showed that 5.84% of xylan was degraded, but only 0.25% of xylan ended up as furfural at optimum severity. The proposed extraction process has high feasibility for industrial application since the low formic acid fraction in solvent allows simple recovery and concentration of used solvent., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Prehydrolysis of lignocellulose produces abundant hemicellulose-derived saccharides (HDS). To obtain pure HDS for application in food or pharmaceutical industries, the prehydrolysis liquor (PHL) must be refined to remove non-saccharide compounds (NSC) derived from lignin depolymerization and carbohydrate degradation. In this work, activated carbon (AC) adsorption was employed to purify HDS from NSC with emphasis on adsorption selectivity. The adsorption isotherms showed the priority of NSC to be absorbed over HDS at low AC level. However, increase of AC over 90% of NSC removal made adsorption non-selective due to competitive adsorption between NSC and HDS. Size exclusion chromatography showed that the adsorption of oligomeric HDS was dominant while monomeric HDS was inappreciable. The limited selectivity suggested that AC adsorption is infeasibility for HDS purification, but applicable as a pretreatment method., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A combined process of lime treatment and mixed bed ion exchange was proposed to separate hemicellulose-derived saccharides (HDS) from prehydrolysis liquor (PHL) of lignocellulose as value added products. The optimization of lime treatment achieved up to 44.2% removal of non-saccharide organic compounds (NSOC), mainly colloidal substances, with negligible HDS degradation at 0.5% lime level and subsequent neutralization by phosphoric acid. The residual NSOC and calcium ions in lime-treated PHL were eliminated by mixed bed ion exchange. The breakthrough curves of HDS and NSOC showed selective retention toward NSOC, leading to 75% HDS recovery with 95% purity at 17 bed volumes of exchange capacity. In addition, macroporous resin showed higher exchange capacity than gel resin as indicated by the triple processing volume. The remarkable selectivity of the combined process suggested the feasibility for HDS separation from PHL., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Prehydrolysis of wood biomass prior to kraft cooking provides a stream containing hemicellulose-derived saccharides (HDSs) but also undesired non-saccharide compounds (NSCs) that were resulted from lignin depolymerization and carbohydrate degradation. In this study, a combined process consisting of lime treatment, resin adsorption, and gel filtration was developed to separate HDSs from NSCs. The macro-lignin impurities that accounted for 32.2% of NSCs were removed by lime treatment at 1.2% dosage with negligible HDSs loss. The majority of NSCs, lignin-derived phenolics, were eliminated by mixed bed ion exchange resin, elevating NSCs removal to 94.0%. The remaining NSCs, furfural and hydroxymethylfurfural, were excluded from HDSs by gel filtration. Chemical composition analysis showed that xylooligosaccharides (XOS) with the degree of depolymerization from 2 to 6 accounted for 28% of the total purified HDSs., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The specific elimination of lignin derivatives from wood hydrolysate without sugar loss has great practical significance to biorefinery and bioenergy. In the present study, a process consisting of calcium hydroxide and anion exchange resin treatments was developed for the purpose of selective removal of lignin from wood prehydrolysis liquor (PHL). Particular emphasis was made on the ionization of phenolic lignin, and the subsequent binding to metallic salts. It was observed that phenolic hydroxyl groups (PhOH) in lignin played an important role in lignin removal. The results showed that up to 95.2% lignin was removed from PHL with 78.8% sugar recovery. This suggested that the proposed process is highly specific to lignin, and therefore can be envisaged as a great contribution to wood-sugar production or bioenergy conversion., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Hot water extraction is an important strategy of wood fractionation, by which the hemicelluloses can be separated for value-added products, while the residual solid can still be processed into traditional wood products. In this study, a combined process consisting of specific lignin precipitation and dialysis was proposed to recover hemicellulosic oligosaccharides (OS) from hot water extract (HWE). The results showed that polyaluminium chloride (PAC) precipitation was highly specific to large molecular lignin, leading to 25.1% lignin removal with negligible OS loss through charge neutralization mechanism. The separation was further enhanced by dialysis, reaching 37.6% OS recovery from HWE with remarkable purity of 94.1%. By the proposed process, 56.36 g OS, mainly xylooligosaccharides with two fractions of 5.2 and 0.51 kDa was recovered from one kg dried wood. This process can be envisaged as a great contribution to wood biorefinery., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Rejects from sulfite pulp mill that otherwise would be disposed of by incineration were converted to ethanol by a combined physical-biological process that was comprised of physical refining and simultaneous saccharification and fermentation (SSF). The energy efficiency was evaluated with comparison to thermochemically pretreated biomass, such as those pretreated by dilute acid (DA) and sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL). It was observed that the structure deconstruction of rejects by physical refining was indispensable to effective bioconversion but more energy intensive than that of thermochemically pretreated biomass. Fortunately, the energy consumption was compensated by the reduced enzyme dosage and the elevated ethanol yield. Furthermore, adjustment of disk-plates gap led to reduction in energy consumption with negligible influence on ethanol yield. In this context, energy efficiency up to 717.7% was achieved for rejects, much higher than that of SPORL sample (283.7%) and DA sample (152.8%)., (Copyright © 2012 Elsevier Ltd. All rights reserved.)